Pensky Martens Flash Point Standards

Paragon ISO 17025 / ISO Guide 34 certified PMCC Flash Point Standards are tested and certified in accordance with ASTM D93 'Standard Test Method for Flash Point by Pensky Martens Closed Cup Tester - Procedure A'. Procedure A is applicable to distillate fuels - diesels, bio-diesel blends, kerosene, heating oil, turbine fuels and lubricating oils. These UKAS certified standards are specifically designed to be used for regular instrument performance checks. Packed uniquely in 3 x 80mL 'single shot' bottles assuring the highest level of sample integrity. An economical, time saving addition to any laboratory concerned with the generation of valid analytical test data. Typically used in, but not limited to, the analysis of petroleum products with flash points above 40°C and below 360°C.

Find detailed technical data for all Paragon Pensky Martens Flash Point Standards on the Paragon Scientific webpage

Product #

Description

Add to Cart

FPPMCC1 Flash Point Standard - Pensky Martens certified reference material, ASTM D 93 Proc. A (59.0 °C)
FPPMCC2 Flash Point Standard - Pensky Martens certified reference material, ASTM D 93 Proc. A (76.5 °C)
FPPMCC3 Flash Point Standard - Pensky Martens certified reference material, ASTM D 93 Proc. A (116.0 °C)
FPPMCC4 Flash Point Standard - Pensky Martens certified reference material, ASTM D 93 Proc. A (143.0 °C)
FPPMCC5 Flash Point Standard - Pensky Martens certified reference material, ASTM D 93 Proc. A (184.0 °C)
FPPMCC6 Flash Point Standard - Pensky Martens certified reference material, ASTM D 93 Proc. A (232.0 °C)