TSKgel® Gel Filtration Columns for Cationic Polymers

TSKgel PWxl-CP columns were specifically developed for the analysis of water-soluble cationic polymers. Composed of polymethacrylate beads, cationic groups are introduced on the surface of the TSKgel PWxl-CP packing material to prevent adsorption of cationic polymers and allow elution under low salt conditions. These columns show high theoretical plate numbers, linear calibration curves and high durability because the base resin is the same as that used in the TSKgel PWxl series columns.Three columns are available within the TSKgel PWxl-CP series, each with a different particle size, separation range and exclusion limit, allowing polymers within a wide molecular mass range to be separated and characterized.

Product #

Description

Phase

Particle Size

Length × I.D.

Add to Cart

821873 TSKgel® G3000PWXL-CP HPLC Column hydroxylated methacrylate phase
7 μm
30 cm × 7.8 mm
821874 TSKgel® G5000PWXL-CP HPLC Column hydroxylated methacrylate phase
10 μm
30 cm × 7.8 mm
821875 TSKgel® G6000PWXL-CP HPLC Column hydroxylated methacrylate phase
13 μm
30 cm × 7.8 mm
821876 TSKgel® PWXL-CP Guard Column hydroxylated methacrylate phase
13 μm
4 cm × 6 mm