Rheodyne® Model 9010 Injector

All flow passages in this 6-port injector are inert PEEK (polyether etherketone) or alumina-ceramic materials. They are unaffected by buffers, acids, bases, or halide salts, including 1 M sodium chloride, over the entire pH range. They valve is rated for pressure up to 5000 psi (350 kg/cm2), but the usable operating pressure may be lower, depending on the sample loop and solvents used.This injector is similar in function to the Model 7010 stainless steel injector, but is constructed of inert PEEK and Tefzel® materials for use from pH 0 to pH 14. It can be used for HPLC, soft gel chromatography, or ion chromatography.A position-sensing switch closes in the INJECT position and stays closed until the handle is returned to the LOAD position. Supplied with a 20 μL sample loop; order additional loops separately.

Product #

Description

Add to Cart

57638 Loop Fill Port for use with 9010 Injector
57639 Needle Port for use with 9010 Injector
55052 RheBuild® Kit for use with 9010/9040 Injector
57695 Rheodyne® Model 9010 Injector
57640 Sample Loop for 9010, 9125, and 9725 Injectors volume 5 μL, PEEK
57641 Sample Loop for 9010, 9125, and 9725 Injectors volume 10 μL, PEEK
57642 Sample Loop for 9010, 9125, and 9725 Injectors volume 20 μL, PEEK
57643 Sample Loop for 9010, 9125, and 9725 Injectors volume 50 μL, PEEK
57644 Sample Loop for 9010, 9125, and 9725 Injectors volume 100 μL, PEEK
57645 Sample Loop for 9010, 9125, and 9725 Injectors volume 200 μL, PEEK
57646 Sample Loop for 9010, 9125, and 9725 Injectors volume 500 μL, PEEK
57647 Sample Loop for 9010, 9125, and 9725 Injectors volume 1 mL, PEEK
57648 Sample Loop for 9010, 9125, and 9725 Injectors volume 2 mL, PEEK
57649 Sample Loop for 9010, 9125, and 9725 Injectors volume 5 mL, PEEK
57696 Tefzel® Rotor Seal for use with model 9010 injector