Inlet Filters, Debubbler

Bottom-of-the-Bottle 2 μm Filters - These Upchurch filters have an integrated 2μm PEEK sparging frit. Connect to 1/8 inch tubing through push-on connectors.
10 μm Inlet Filter - This metal-free Upchurch unit consists of a replaceable 10 μm ultra-high molecular weight polyethylene filter that screws into a Tefzel holder. The unit connects to the inlet tubing through a flangeless Tefzel fitting (included).
59277 (Slip-on Inlet Filter)
Product shown is 58267
5-8453 (Solvent Debubbler with Bracket)

Solvent filter/sparger

Product #

Description

Add to Cart

55058 Bottom-of-the-Bottle filter/sparger pore size 2 μm
A437 Bottom-of-the-Bottle filter/sparger pore size 2 μm

Filter Cup for UHMWPE

Product #

Description

Add to Cart

56706 Filter Cup for UHMWPE Bottom-of-the-Bottle™ solvent filter pore size 10 μm

Solvent Inlet filters

Product #

Description

Add to Cart

56705 Inlet Filter Assembly pore size 10 μm
59277 Slip-On Inlet Filter pore size 10 μm
58267 Stainless Steel Inlet Filter pore size 2 μm

2 μm Inlet Filter Optional PTFE Ferrules

Mobile Phase Solvent Debubbler with Bracket

Gas bubbles in the mobile phase reduce pump output and cause check valves to malfunction. The mobile phase debubbler removes bubbles from the pump inlet line. Bubbles in the incoming mobile phase rise in the debubbler, displacing an equal volume of liquid from the debubbler reservoir to the pump. When necessary, simply remove the cap and refill the reservoir -- the gas-liquid interface is visible through the housing. Compatible with 1.5 mm I.D. and 3.0 mm I.D. PTFE tubing used with Waters and other popular HPLC pumps. KEL-F, PTFE, and 316 stainless steel construction.

Product #

Description

Add to Cart

58453 Mobile Phase Solvent Debubbler with Bracket

Union for 2 μm Inlet Filter

Product #

Description

Add to Cart

22041 Swagelok® Union Swagelok®, 200-6, stainless steel, 1/8 in., for connecting 1/8 to 1/8 in.
22999 Valco® Unions internal reducing, bore 0.75 mm, for connecting 1/8 to 1/16 in.