Attention:

Certain features of Sigma-Aldrich.com will be down for maintenance the evening of Friday August 18th starting at 8:00 pm CDT until Saturday August 19th at 12:01 pm CDT.   Please note that you still have telephone and email access to our local offices. We apologize for any inconvenience.

Analytical Standards

Analytical Inorganic Standards

 

Features our quality standards, with product listings subdivided into the following categories:

Ion Standard Solutions


  • ICP/DCP Standards
    • Element concentration is 10,000 µg/mL; exact value is stated on the label
    • Trace impurities are below 20 µg/mL
    • Prepared from the highest quality solvents and solutes (99.999+% pure)
    • Rigorously assayed: certificate of analysis includes matrix concentration, named element concentration, and any impurities which have been detected

  • Atomic Absorption Standards
    • Element concentration is 1,000 µg/mL; exact value is stated on the label
    • High purity solvents and solutes are used to ensure accuracy and purity
    • Frequent stock rotation
    • Evaluated by classical analytical methods and ICP spectrographic analysis

  • AA/ICP Calibration Check Standards for Environmental Analysis
    • Element concentration is 1,000±10 µg/mL; exact value is stated on the label
    • Trace impurities are below 1 µg/mL and are included on the Certificate of Analysis
    • Raw material is 99.999+% pure; standards are prepared with 18 Megaohm water; PPB grade acids are used for matrix purity
    • Frequent stock rotation
    • NIST traceability and documentation of procedures, identity check, and chemical analysis performed for each lot

  • AA/ICP Multi-Element Calibration Standards for Environmental Analysis
    • Mixed Element Instrumentation Calibration Standards
    • Mixed Element Interference Check Solutions
    • Solutions for EPA Methods
    • Reagent Blank Solutions, prepared in ASTM Type 1 water
    • Highest quality raw materials which have been assayed for trace impurities and major constituents
    • Concentrates used for the mixed standards are traceable to NIST standards
    • Lot specific analysis provided with each standard and blank solution


  • Matrix Modifiers for Graphite Furnace AA
    • Prevent loss of volatile analytes
    • Specially purified for low blank signal
    • Enables your furnace to work at peak performance
    • Ready-to-use solutions with Certificate of Analysis included with each unit