Skip to Content
Merck

Phthalate occurrence in rivers and tap water from central Spain.

The Science of the total environment (2014-09-14)
N Domínguez-Morueco, S González-Alonso, Y Valcárcel
ABSTRACT

The aim of this study is to evaluate the presence and concentrations of the main phthalates in water from the Jarama and Manzanares rivers in the region of Madrid (RM, Central Spain), the most densely populated region of Spain, and to determine the possible oestrogenic activity based on found phthalate concentration. The presence of phthalates in major supply drinking water areas of the RM was also analysed, thus allowing a preliminary assessment of the health risks resulting from the concentrations obtained. The results of this study show the presence of the three (dimethyl phthalate (DMP), diethyl phthalate (DEP) di-n-butyl phthalate (DBP)) of five phthalates studied (dimethyl phthalate (DMP), diethyl phthalate (DEP), di-(2-ethylhexyl) phthalate (DEHP), benzyl-butyl phthalate (BBP) and di-n-butyl phthalate (DBP)). The DBP was found in both river and tap water samplers, whereas DMP and DEP were found in only drinking water samples. The DBP was found to make the highest average contribution to pollution in both river and tap water. The DEHP was not found in both the river and tap water because it is one of the most regulated phthalates. The highest phthalate contamination was found in the Manzanares river and in those areas that receive treated water from the Tagus river. The phthalates found in river and tap water in the RM do not represent a potential oestrogenic risk for the aquatic environment or humans. A preliminary risk assessment suggested that the risk of exposure to phthalates from tap water in this study is acceptable, although continuous monitoring of the presence of these substances in both drinking and river water should be undertaken to detect possible increases in their concentrations. This is the first study to analyse the presence of phthalates in both rivers and drinking water of the centre of Spain.

MATERIALS
Product Number
Brand
Product Description

Supelco
Ethyl Acetate, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Ethyl acetate
Sigma-Aldrich
Ethyl acetate
Supelco
Methylene Chloride, Pharmaceutical Secondary Standard; Certified Reference Material
USP
Methyl alcohol, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Dichloromethane, suitable for HPLC, ≥99.8%, contains amylene as stabilizer
Sigma-Aldrich
Dichloromethane, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 50-150 ppm amylene as stabilizer
Sigma-Aldrich
Ethyl acetate, suitable for HPLC, ≥99.7%
Sigma-Aldrich
Ethyl acetate, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%
Sigma-Aldrich
Ethyl acetate, suitable for HPLC, ≥99.8%
Sigma-Aldrich
Hexane, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
Hexane, suitable for HPLC, ≥95%
Sigma-Aldrich
Dichloromethane, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Hexane, ReagentPlus®, ≥99%
Sigma-Aldrich
Ethyl acetate, ACS reagent, ≥99.5%
Sigma-Aldrich
Dichloromethane, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
Sigma-Aldrich
Hexane, Laboratory Reagent, ≥95%
Sigma-Aldrich
Dichloromethane, biotech. grade, 99.9%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Ethyl acetate, biotech. grade, ≥99.8%
Sigma-Aldrich
Ethyl acetate, ACS reagent, ≥99.5%
Sigma-Aldrich
Dichloromethane, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Ethyl acetate, ≥99%, FCC, FG
Sigma-Aldrich
Phthalic acid dipotassium salt, 98%
Supelco
Potassium phthalate monobasic, qNMR standard, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Sigma-Aldrich
Ethyl acetate, natural, ≥99%, FCC, FG
Sigma-Aldrich
Potassium phthalate monobasic, ACS reagent, acidimetric standard
Sigma-Aldrich
Methanol solution, suitable for NMR (reference standard), 4% in methanol-d4 (99.8 atom % D), NMR tube size 3 mm × 8 in.
Sigma-Aldrich
Dichloromethane, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Ethyl acetate, anhydrous, 99.8%
Sigma-Aldrich
Nitrogen, ≥99.998%