Skip to Content
Merck
  • The effects of anesthesia, muscle paralysis, and ventilation on the lung evaluated by lung diffusion for carbon monoxide and pulmonary surfactant protein B.

The effects of anesthesia, muscle paralysis, and ventilation on the lung evaluated by lung diffusion for carbon monoxide and pulmonary surfactant protein B.

Anesthesia and analgesia (2014-11-02)
Fabiano Di Marco, Daniele Bonacina, Emanuele Vassena, Erik Arisi, Anna Apostolo, Cristina Banfi, Stefano Centanni, Piergiuseppe Agostoni, Roberto Fumagalli
ABSTRACT

An increased alveolar-arterial oxygen tension difference is frequent in anesthetized patients. In this study, we evaluated the effect on the lung of anesthesia, muscle paralysis, and a brief course of mechanical ventilation. Lung diffusion for carbon monoxide (DLCO), including pulmonary capillary blood volume (Vc) and conductance of the alveolar-capillary membrane (DM), and pulmonary surfactant protein type B (a marker of alveolar damage) were measured in 45 patients without pulmonary disease undergoing extrathoracic surgery. Anesthesia, muscle paralysis, and mechanical ventilation led to impairment of gas exchange, with a reduction of DLCO values immediately after anesthetic induction due to a concomitant reduction of both DM and Vc. While changes in DM were due to the reduction of lung volume, changes in Vc were not limited to volume loss, since the Vc/alveolar volume ratio decreased significantly. Although DLCO and its components decreased immediately after induction, none of the values decreased further at 1 and 3 hours. Surfactant protein type B, however, was unchanged immediately after anesthesia but increased at 1 hour after induction and further increased after 3 hours of anesthesia. The level of alveolar damage correlated with the reduction of lung perfusion and lung dynamic strain (i.e., ratio between tidal volume and end-expiratory lung volume). A brief course of anesthesia and controlled ventilation leads to: (1) alveolar damage, which is correlated with lung strain and perfusion, and (2) impaired gas exchange mainly due to volume loss but also to reduced aerated lung perfusion.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Methane-12C, 13C-depleted, 99.99 atom % 12C
Carbon - Vitreous, rod, 200mm, diameter 1.0mm, glassy carbon
Carbon - Vitreous, foil, 100x100mm, thickness 1.0mm, glassy carbon
Supelco
Activated Charcoal Norit®, Norit® RBAA-3, rod
Carbon - Vitreous, rod, 100mm, diameter 1.0mm, glassy carbon
Carbon - Vitreous, rod, 50mm, diameter 1.0mm, glassy carbon
Carbon - Vitreous, foil, 25x25mm, thickness 0.5mm, glassy carbon
Carbon - Vitreous, rod, 100mm, diameter 3.0mm, glassy carbon
Carbon - Vitreous, foam, 300x300mm, thickness 20mm, bulk density 0.05g/cm3, porosity 96.5%
Carbon - Vitreous, rod, 200mm, diameter 3.0mm, glassy carbon
Carbon - Vitreous, foil, 25x25mm, thickness 4.0mm, glassy carbon
Carbon - Vitreous, rod, 5mm, diameter 3.0mm, glassy carbon
Carbon - Vitreous, rod, 100mm, diameter 5.0mm, glassy carbon
Carbon - Vitreous, foam, 300x300mm, thickness 30mm, bulk density 0.05g/cm3, porosity 96.5%
Carbon - Vitreous, tube, 50mm, outside diameter 10mm, inside diameter 3mm, wall thickness 3.5mm, glassy carbon
Carbon - Vitreous, rod, 100mm, diameter 7.0mm, glassy carbon
Carbon - Vitreous, tube, 100mm, outside diameter 10mm, inside diameter 3mm, wall thickness 3.5mm, glassy carbon
Carbon - Vitreous, foil, 50x50mm, thickness 4.0mm, glassy carbon
Carbon - Vitreous, foil, 100x100mm, thickness 2.0mm, glassy carbon
Carbon - Vitreous, foil, 100x100mm, thickness 6.0mm, glassy carbon
Carbon - Vitreous, foam, 150x150mm, thickness 3.2mm, bulk density 0.05g/cm3, porosity 96.5%
Carbon - Vitreous, foam, 150x150mm, 0.05g.cmué, porosity 96.5%, 24 pores/cm
Carbon - Vitreous, foil, 10x10mm, thickness 4.0mm, glassy carbon
Carbon - Vitreous, foil, 10x10mm, thickness 1.0mm, glassy carbon
Carbon - Vitreous, foil, 8x8mm, thickness 0.5mm, glassy carbon
Carbon - Vitreous, rod, 200mm, diameter 5.0mm, glassy carbon
Carbon - Vitreous, foam, 150x150mm, thickness 2.5mm, bulk density 0.05g/cm3, porosity 96.5%
Carbon - Vitreous, foil, 50x50mm, thickness 1.0mm, glassy carbon
Sigma-Aldrich
Sodium chloride solution, 5 M in H2O, BioReagent, Molecular Biology, suitable for cell culture
Supelco
Sodium chloride, Pharmaceutical Secondary Standard; Certified Reference Material