Todas as fotos(3)

203432

Sigma-Aldrich

Indium

powder, −60 mesh, 99.999% trace metals basis

Empirical Formula (Hill Notation):
In
Número CAS:
Peso molecular:
114.82
Número EC:
Número MDL:
ID de substância PubChem:
NACRES:
NA.23

Nível de qualidade

100

pressão de vapor

<0.01 mmHg ( 25 °C)

teor

99.999% trace metals basis

forma

powder

resistividade

8.37 μΩ-cm

tamanho de partícula

−60 mesh

pf

156.6 °C (lit.)

densidade

7.3 g/mL at 25 °C (lit.)

SMILES string

[In]

InChI

1S/In

InChI key

APFVFJFRJDLVQX-UHFFFAOYSA-N

Procurando produtos similares? Visit Guia de comparação de produtos

Pictogramas

FlameExclamation mark

Palavra indicadora

Danger

Hazard Classifications

Acute Tox. 4 Inhalation - Eye Irrit. 2 - Flam. Sol. 1 - Skin Irrit. 2 - STOT SE 3

Órgãos-alvo

Respiratory system

Storage Class Code

4.1B - Flammable solid hazardous materials

WGK Alemanha

WGK 3

Ponto de fulgor (ºF)

Not applicable

Ponto de fulgor (ºC)

Not applicable

Equipamento de proteção individual

Eyeshields, Gloves, type P1 (EN143) respirator filter, type P3 (EN 143) respirator cartridges

Certificado de análise

Certificado de origem

Thirumaleshwara N Bhat et al.
Journal of nanoscience and nanotechnology, 13(1), 498-503 (2013-05-08)
The thermal oxidation process of the indium nitride (InN) nanorods (NRs) was studied. The SEM studies reveal that the cracked and burst mechanism for the formation of indium oxide (In2O3) nanostructures by oxidizing the InN NRs at higher temperatures. XRD...
D Hermann et al.
Inorganic chemistry, 52(5), 2744-2749 (2013-02-16)
Several metal-organic framework compounds (MOF-5, MIL-68(Ga), MIL-68(In), MIL-53(Al)) were loaded with azobenzene (AZB), as confirmed by XRPD measurements and elemental analysis. By IR spectroscopy, it was shown that the light-induced trans/cis isomerization of AZB in these hybrid host-guest compounds is...
Han-Youl Ryu et al.
Optics express, 21 Suppl 1, A190-A200 (2013-02-15)
We investigate the dependence of various efficiencies in GaN-based vertical blue light-emitting diode (LED) structures on the thickness and doping concentration of the n-GaN layer by using numerical simulations. The electrical efficiency (EE) and the internal quantum efficiency (IQE) are...
Annick Bay et al.
Optics express, 21 Suppl 1, A179-A189 (2013-02-15)
In this paper the design, fabrication and characterization of a bioinspired overlayer deposited on a GaN LED is described. The purpose of this overlayer is to improve light extraction into air from the diode's high refractive-index active material. The layer...
Vahid A Akhavan et al.
ChemSusChem, 6(3), 481-486 (2013-02-13)
Thin-film photovoltaic devices (PVs) were prepared by selenization using oleylamine-capped Cu(In,Ga)Se2 (CIGS) nanocrystals sintered at a high temperature (>500 °C) under Se vapor. The device performance varied significantly with [Ga]/[In+Ga] content in the nanocrystals. The highest power conversion efficiency (PCE) observed...

Artigos

Discovery and Single Crystal Growth of Lanthanide Intermetallics—Interplay of Synthesis and Physical Properties

Solid state and materials chemistry have made a tremendous impact and have experienced growth in recent years, particularly for rare earthcontaining materials.

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica