Todas as fotos(1)

267902

Sigma-Aldrich

Titanium

wire, diam. 0.81 mm, 99.7% trace metals basis

Empirical Formula (Hill Notation):
Ti
Número CAS:
Peso molecular:
47.87
Número EC:
Número MDL:
ID de substância PubChem:
NACRES:
NA.23

Nível de qualidade

100

teor

99.7% trace metals basis

forma

wire

temperatura de autoignição

860 °F

resistividade

42.0 μΩ-cm, 20°C

diâmetro

0.81 mm

pb

3287 °C (lit.)

pf

1660 °C (lit.)

densidade

4.5 g/mL at 25 °C (lit.)

SMILES string

[Ti]

InChI

1S/Ti

InChI key

RTAQQCXQSZGOHL-UHFFFAOYSA-N

Aplicação

Titanium wire may be used as a substrate for the sol gel deposition of solid-phase microextraction fiber.

Embalagem

1 ea in poly spool

Quantidade

10 m (approximately 23 g)

Código de classe de armazenamento

13 - Non Combustible Solids

WGK

nwg

Ponto de fulgor (ºF)

Not applicable

Ponto de fulgor (ºC)

Not applicable

Equipamento de proteção individual

Eyeshields, Gloves, type N95 (US)

Certificado de análise

Certificado de origem

Unbreakable solid-phase microextraction fibers obtained by sol? gel deposition on titanium wire.
Azenha MA, et al.
Analytical Chemistry, 78.6, 2071-2074 (2006)
A Kurbad et al.
International journal of computerized dentistry, 16(2), 125-141 (2013-08-13)
This article presents two novel options for lithium-disilicate restorations supported by single-tooth implants. By using a Ti-Base connector, hybrid abutments and hybrid abutment crowns can be fabricated for different implant systems. The latter option in particular is an interesting new
Jinho Shin et al.
Journal of nanoscience and nanotechnology, 13(8), 5807-5810 (2013-07-26)
In this study, hydroxyapatite (HA) was coated on anodized titanium (Ti) surfaces through radio frequency magnetron sputtering in order to improve biological response of the titanium surface. All the samples were blasted with resorbable blasting media (RBM). RBM-blasted Ti surface
Jiangxue Wang et al.
Journal of nanoscience and nanotechnology, 13(6), 3874-3879 (2013-07-19)
Nanoscale materials (such as TiO2, hydroxyapatite nanoparticles) have gained much concern in the coating of implants for cell adhesion and growth to improve the osteoconductivity. However, due to attrition and corrosion, the wear particles would be generated from the joint
Mphilisi M Mahlambi et al.
Journal of nanoscience and nanotechnology, 13(7), 4934-4942 (2013-08-02)
Metal-doped anatase nanosized titania photocatalysts were successfully synthesized using a sol-gel process. Different amounts of the dopants (0.2, 0.4, 0.6, 0.8 and 1.0%) of the metals (Ag, Ni, Co and Pd) were utilized. The UV-Vis spectra (solid state diffuse reflectance

Artigos

Biomedical Implant Devices Fabricated from Low Young’s Modulus Titanium Alloys Demonstrating High Mechanical Biocompatibility

Biomedical implants are essentially foreign substances within the human body that must survive many years’ exposure to demanding mechanical and physiological conditions. Despite these challenges, metal implants have been widely used to substitute for or rebuild hard tissues such as bones and teeth.

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica