348791

Sigma-Aldrich

Titanium

foil, thickness 0.127 mm, 99.7% trace metals basis

Empirical Formula (Hill Notation):
Ti
Número CAS:
Peso molecular:
47.87
Número EC:
Número MDL:
ID de substância PubChem:
NACRES:
NA.23

Nível de qualidade

100

teor

99.7% trace metals basis

forma

foil

temperatura de autoignição

860 °F

resistividade

42.0 μΩ-cm, 20°C

espessura

0.127 mm

pb

3287 °C (lit.)

pf

1660 °C (lit.)

densidade

4.5 g/mL at 25 °C (lit.)

Setor em destaque

Battery Manufacturing

SMILES string

[Ti]

InChI

1S/Ti

InChI key

RTAQQCXQSZGOHL-UHFFFAOYSA-N

Categorias relacionadas

Aplicação

Titanium based foils can be used in the anodization process for the fabrication of titanium nanotubes (TNTs) which can further be used in solar cells and other sensor based applications.

Embalagem

1 ea in rigid mailer

Quantidade

150 × 150 mm (approximately 13 g)

storage_class_code

11 - Combustible Solids

WGK Alemanha

nwg

Ponto de fulgor (ºF)

Not applicable

Ponto de fulgor (ºC)

Not applicable

Equipamento de proteção individual

Eyeshields, Gloves, type N95 (US)

Certificado de análise

Certificado de origem

Rapid TiO 2 Nanotubes Formation in Aged Electrolyte and Their Application as Photocatalysts for Cr (VI) Reduction Under Visible Light
Zulkifli MA, et al.
Nanotechnology, IEEE Transactions, 17(6), 1106-1110 (2018)
N-doped TiO 2 nanotubes coated with a thin TaO x N y layer for photoelectrochemical water splitting: dual bulk and surface modification of photoanodes
Kim H, et al.
Energy & Environmental Science, 8(1), 247-257 (2015)
Fabrication of high aspect ratio and open-ended TiO2 nanotube photocatalytic arrays through electrochemical anodization
Wong RJ, et al.
AIChE Journal, 62(2), 415-420 (2016)
A new approach to electropolishing of pure Ti foil in acidic solution at room temperature for the formation of ordered and long TiO2 nanotube arrays
Asgari V, et al.
Corrosion Science, 136(6), 38-46 (2018)
Jinho Shin et al.
Journal of nanoscience and nanotechnology, 13(8), 5807-5810 (2013-07-26)
In this study, hydroxyapatite (HA) was coated on anodized titanium (Ti) surfaces through radio frequency magnetron sputtering in order to improve biological response of the titanium surface. All the samples were blasted with resorbable blasting media (RBM). RBM-blasted Ti surface...
Artigos
Biomedical implants are essentially foreign substances within the human body that must survive many years’ exposure to demanding mechanical and physiological conditions. Despite these challenges, metal implants have been widely used to substitute for or rebuild hard tissues such as bones and teeth.
Leia mais

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica