Pular para o conteúdo
Merck
Todas as fotos(1)

Documentos Principais

378321

Sigma-Aldrich

Silicone oil

viscosity 10 cSt (25 °C)

Sinônimo(s):

PDMS, Polydimethylsiloxane

Faça loginpara ver os preços organizacionais e de contrato

Selecione um tamanho

250 ML
R$ 796,00
1 L
R$ 2.888,00

R$ 796,00


Previsão de entrega em19 de maio de 2025


Solicite uma grande encomenda

Selecione um tamanho

Alterar visualização
250 ML
R$ 796,00
1 L
R$ 2.888,00

About This Item

Fórmula linear:
[-Si(CH3)2O-]n
Número CAS:
Número MDL:
Código UNSPSC:
12162002
NACRES:
NA.23

R$ 796,00


Previsão de entrega em19 de maio de 2025


Solicite uma grande encomenda

densidade de vapor

>1 (vs air)

Nível de qualidade

pressão de vapor

<5 mmHg ( 25 °C)
5 mmHg ( 20 °C)

Formulário

liquid

índice de refração

n20/D 1.403 (lit.)

viscosidade

10 cSt(25 °C)

p.e.

>140 °C/0.002 mmHg (lit.)

densidade

0.93 g/mL at 25 °C

Procurando produtos similares? Visita Guia de comparação de produtos

Descrição geral

Silicon oils constitute a group of hydrophobicpolymeric compounds with a linear chain of siloxanerepeating units (–Si–O) and a variety of side chains. Owing to their uniqueproperties like wettability, lubrication, smooth gliding behavior, andmechanical strength, they are widely used in electric insulators, anti-foaming,laboratories, and lubricants.
Silicone oil is a low viscosity, liquid polymerized, siloxane with organic side chains. Silicone oil exhibits antimicrobial activity against endopthalmitis causing microorganisms under in vitro conditions.[1]

Aplicação

Silicone oilcan be used as an intraocular liquid in vitreoretinal surgery as it canmaintain the adhesion between the retina and retinal pigment epithelium.

It can be used in a two-phase partitioning bioreactor totreat gas effluents. Silicon oils are compatible with the aqueous phase andlead to better emulsion between the two phases.

Itcan also be used to generate hydrophobic coatings on glass surfaces.(4)

Características e benefícios

  • High spreading power
  • Non-toxic
  • High lubricity
  • Formation of stable film strips
  • Goodstability

Código de classe de armazenamento

10 - Combustible liquids

Classe de risco de água (WGK)

WGK 1

Ponto de fulgor (°F)

214.0 °F - closed cup

Ponto de fulgor (°C)

101.1 °C - closed cup

Equipamento de proteção individual

Eyeshields, Gloves


Escolha uma das versões mais recentes:

Certificados de análise (COA)

Lot/Batch Number

Não está vendo a versão correta?

Se precisar de uma versão específica, você pode procurar um certificado específico pelo número do lote ou da remessa.

Já possui este produto?

Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.

Visite a Biblioteca de Documentos

Os clientes também visualizaram

Slide 1 of 7

1 of 7

Silicone oil viscosity 500&#160;cSt&#160;(25&#160;°C)

Sigma-Aldrich

378380

Silicone oil

Silicone oil viscosity 350&#160;cSt&#160;(25&#160;°C)

Sigma-Aldrich

378372

Silicone oil

Silicone oil viscosity 30,000&#160;cSt&#160;(25&#160;°C)

Sigma-Aldrich

378429

Silicone oil

Silicone oil European Pharmacopoeia (EP) Reference Standard

S0600000

Silicone oil

Silicone oil high temperature

Sigma-Aldrich

175633

Silicone oil

Maurizio Mete et al.
Graefe's archive for clinical and experimental ophthalmology = Albrecht von Graefes Archiv fur klinische und experimentelle Ophthalmologie, 249(6), 821-826 (2010-11-17)
Several surgical techniques have been described for the treatment of retinal detachment (RD) associated to myopic macular hole (MMH). In this retrospective study, the anatomical and functional outcomes of pars plana vitrectomy (PPV) with long-term tamponade, using either 1000 cSt
Daniel Bar-David et al.
Optics express, 26(15), 19115-19122 (2018-08-17)
We experimentally demonstrate light-flow interaction, in which the angular momentum of circulating light excites micro-vortices. In contrast with the solid-phase of matter, where one has to overcome static friction in order to start motion, liquids have no "static drag." Relevant
Jean-Marc Aldric et al.
Applied biochemistry and biotechnology, 153(1-3), 67-79 (2009-01-22)
A two-phase partitioning bioreactor to treat gas effluents polluted by volatile organic compound has been developed. In this work, both the mass transfer of isopropylbenzene (IPB) and oxygen have been considered in relation to their influence on the hydrodynamics of
Nobuo Yoshimoto et al.
Scientific reports, 3, 1191-1191 (2013-02-05)
When establishing the most appropriate cells from the huge numbers of a cell library for practical use of cells in regenerative medicine and production of various biopharmaceuticals, cell heterogeneity often found in an isogenic cell population limits the refinement of
Zhiyong Li et al.
Optics express, 21(1), 1281-1286 (2013-02-08)
A gold nanorod-facilitated optical heating method for droplets in microfluidic chips is reported. Individual and stream nanoliter level droplets containing gold nanorods are heated by a low power 808-nm-wavelength laser. Owing to the high photothermal conversion efficiency of gold nanorods

Questions

1–2 of 2 Questions  
  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer
    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer
    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica