Todas as fotos(1)

647101

Sigma-Aldrich

Silicon

wafer (single side polished), <111>, N-type, contains no dopant, diam. × thickness 2 in. × 0.5 mm

Sinônimo(s):
Silicon element
Fórmula linear:
Si
Número CAS:
Peso molecular:
28.09
Número EC:
Número MDL:
ID de substância PubChem:
NACRES:
NA.23

Nível de qualidade

100

forma

crystalline (cubic (a = 5.4037))
wafer (single side polished)

não contém

dopant

diâmetro × espessura

2 in. × 0.5 mm

pb

2355 °C (lit.)

pf

1410 °C (lit.)

densidade

2.33 g/mL at 25 °C (lit.)

propriedades semicondutoras

<111>, N-type

SMILES string

[Si]

InChI

1S/Si

InChI key

XUIMIQQOPSSXEZ-UHFFFAOYSA-N

Procurando produtos similares? Visit Guia de comparação de produtos

Embalagem

5 ea in rigid mailer
1 ea in padded box

propriedades físicas

Oxygen content: ≤ 1~1.8 x 1018 /cm3; Carbon content: ≤ 5 x 1016 /cm3; Boule diameter: 1~8 ″
0 vortex defects. Etch pitch density (EPD) < 100 (cm-2). Resistivity 100 - 3000 Ωcm.

Storage Class Code

13 - Non Combustible Solids

WGK Alemanha

WGK 3

Ponto de fulgor (ºF)

Not applicable

Ponto de fulgor (ºC)

Not applicable

Equipamento de proteção individual

Eyeshields, Gloves, type N95 (US)

Certificado de análise

Certificado de origem

Youngin Jeon et al.
Journal of nanoscience and nanotechnology, 13(5), 3350-3353 (2013-07-19)
Si-nanowire (NW)-array-based NOT-logic circuits were constructed on plastic substrates. The Si-NW arrays were fabricated on a Si wafer through top-down methods, including conventional photolithography and crystallographic wet etching, and transferred onto the plastic substrates. Two field-effect transistors were fabricated on...
Jae Cheol Shin et al.
Journal of nanoscience and nanotechnology, 13(5), 3511-3514 (2013-07-19)
We have characterized the structural properties of the ternary In(x)Ga(1-x)As nanowires (NWs) grown on silicon (Si) substrates using metalorganic chemical vapor deposition (MOCVD). Au catalyzed vapor-liquid-solid (VLS) mode was used for the NW growth. The density of the In(x)Ga(1-x)As NW...
Hyunhui Kim et al.
Journal of nanoscience and nanotechnology, 13(5), 3559-3563 (2013-07-19)
Silicon sheets were fabricated by a new fabricating method, spin casting with various rotation speeds of the graphite mold. The microstructure of spin-cast silicon sheets were investigated using an electron probe microanalyzer (EPMA) and scanning electron microscope/electron backscatter diffraction/orientation image...
Mariya Nazish Memon et al.
JPMA. The Journal of the Pakistan Medical Association, 62(12), 1329-1332 (2013-07-23)
To evaluate the outcome of nasolacrimal intubation as a primary treatment of congenital nasolacrimal duct obstruction (NLDO) in children up to 4 years of age. During the 3 years period from July 2008 to June 2011, in the Paediatric Ophthalmology...
Chengyong Li et al.
Journal of nanoscience and nanotechnology, 13(3), 2272-2275 (2013-06-13)
Mesoporous Si-C-O fibers were fabricated by air activation of a kind of carbon-rich SiC-C fibers at 600 degrees C. The SiC-C fibers were prepared from the hybrid precursor of polycarbosilane and pitch through melt-spinning, air curing and pyrolysis in nitrogen....

Artigos

Molecular Monolayers on Silicon Surfaces

Review the methods and mechanisms for forming molecular monolayers on silicon surfaces, the properties of these monolayers and perspectives regarding their use in molecular electronic and sensing applications.

Dye-Sensitized and Perovskite Solar Cells: Interface Engineering by Atomic Layer Deposition

Since the demonstration of the first practical solar cell 60 years ago, research on novel materials, improved solar cell design and structure, and innovative manufacturing processes have all contributed to a continuous increase in the efficiency of photovoltaic (PV) devices.

FePt Nanogranular films for high density heat-assisted magnetic recording

A hard disk drive (HDD) is a data storage device that stores digital information by magnetizing nanosized magnets on flat disks and retrieves data by sensing the resulting magnetic field.

Building and Engineering Micro/Nano Architectures of Single-Walled Carbon Nanotubes for Electronic Applications

Building and Engineering Micro/Nano Architectures of Single-Walled Carbon Nanotubes for Electronic Applications

Ver tudo

Protocolos

Negative Photoresist Procedure

Our photoresist kit was designed to have the necessary chemical components for each step in the lithographic process. The component materials are provided in pre-weighed quantities for your convenience. Etchants are available separately so that the proper etchant can be chosen for a variety of substrate choices.

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica