Merck
Todas as fotos(1)

647780

Sigma-Aldrich

Silicon

wafer (single side polished), <100>, N-type, contains phosphorus as dopant, diam. × thickness 2 in. × 0.5 mm

Sinônimo(s):
Silicon element
Fórmula linear:
Si
Número CAS:
Peso molecular:
28.09
Número MDL:
ID de substância PubChem:
NACRES:
NA.23

forma

crystalline (cubic (a = 5.4037))
wafer (single side polished)

Nível de qualidade

contém

phosphorus as dopant

resistividade

1-10 Ω-cm

diâmetro × espessura

2 in. × 0.5 mm

pb

2355 °C (lit.)

pf

1410 °C (lit.)

densidade

2.33 g/mL at 25 °C (lit.)

propriedades semicondutoras

<100>, N-type

SMILES string

[Si]

InChI

1S/Si

InChI key

XUIMIQQOPSSXEZ-UHFFFAOYSA-N

Procurando produtos similares? Visit Guia de comparação de produtos

Comparar Itens Semelhantes

Ver Comparação Total

Show Differences

1 of 4

Este Item
647101647675647764
Silicon wafer (single side polished), &#60;100&#62;, N-type, contains phosphorus as dopant, diam. × thickness 2&#160;in. × 0.5&#160;mm

Sigma-Aldrich

647780

Silicon

Silicon wafer (single side polished), &#60;111&#62;, N-type, contains no dopant, diam. × thickness 2&#160;in. × 0.5&#160;mm

Sigma-Aldrich

647101

Silicon

Silicon wafer (single side polished), &#60;100&#62;, P-type, contains boron as dopant, diam. × thickness 2&#160;in. × 0.5&#160;mm

Sigma-Aldrich

647675

Silicon

Silicon wafer (single side polished), &#60;100&#62;, P-type, contains boron as dopant, diam. × thickness 3&#160;in. × 0.5&#160;mm

Sigma-Aldrich

647764

Silicon

bp

2355 °C (lit.)

bp

2355 °C (lit.)

bp

2355 °C (lit.)

bp

2355 °C (lit.)

mp

1410 °C (lit.)

mp

1410 °C (lit.)

mp

1410 °C (lit.)

mp

1410 °C (lit.)

density

2.33 g/mL at 25 °C (lit.)

density

2.33 g/mL at 25 °C (lit.)

density

2.33 g/mL at 25 °C (lit.)

density

2.33 g/mL at 25 °C (lit.)

contains

phosphorus as dopant

contains

-

contains

boron as dopant

contains

boron as dopant

resistivity

1-10 Ω-cm

resistivity

-

resistivity

-

resistivity

-

propriedades físicas

0 vortex defects. Etch pitch density (EPD) < 100 (cm-2). Resistivity 10-3 - 40 Ωcm
Oxygen content: <= 1~1.8 x 1018 /cm3; Carbon content: <= 5 x 1016 /cm3; Boule diameter: 1~8 ″

Código de classe de armazenamento

13 - Non Combustible Solids

WGK

WGK 3

Ponto de fulgor (ºF)

Not applicable

Ponto de fulgor (ºC)

Not applicable

Equipamento de proteção individual

Eyeshields, Gloves, type N95 (US)


Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Os números dos produtos são combinados com os tamanhos/quantidades da embalagem quando exibidos no site (exemplo: T1503-25G). Por favor, certifique-se você insere APENAS o número do produto no campo Número do produto (Exemplo T1503).

Exemplo

T1503
Número do produto
-
25G
Tamanho/quantidade da embalagem

Exemplos adicionais:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

insira como1.000309185)

Está com problemas? Sinta-se à vontade para entrar em contato Assistência Técnica para obter assistência

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Produtos Aldrich

  • Se encontrar um número de lote como TO09019TO - insira o número do lote 09019TO sem as duas primeiras letras.

  • Se encontrar um número de lote com um código de preenchimento, como 05427ES-021 - insira o número do lote 05427ES sem o código de preenchimento -021.

  • Se encontrar um número de lote com um código de preenchimento como STBB0728K9 - digite o número do lote STBB0728 sem o código de preenchimento K9.

Não encontra o que está procurando?

Em alguns casos, um COA pode não estar disponível on-line. Se a sua pesquisa não encontrou o COA, você pode solicitar um.

Solicitar COA

Os clientes também visualizaram

Slide 1 of 5

1 of 5

Supelco

Supelco

79633

Micro particles based on polystyrene

Gold coated silicon wafer 99.999% (Au), layer thickness 1000&#160;Å, 99.99% (Ti)

Sigma-Aldrich

643262

Gold coated silicon wafer

Sigma-Aldrich

Sigma-Aldrich

773700

Monolayer graphene film

Silicon pieces, 99.95% trace metals basis

Sigma-Aldrich

343250

Silicon

Chengyong Li et al.
Journal of nanoscience and nanotechnology, 13(3), 2272-2275 (2013-06-13)
Mesoporous Si-C-O fibers were fabricated by air activation of a kind of carbon-rich SiC-C fibers at 600 degrees C. The SiC-C fibers were prepared from the hybrid precursor of polycarbosilane and pitch through melt-spinning, air curing and pyrolysis in nitrogen.
K W Urban et al.
Physical review letters, 110(18), 185507-185507 (2013-05-21)
Newly developed achromatic electron optics allows the use of wide energy windows and makes feasible energy-filtered transmission electron microscopy (EFTEM) at atomic resolution. In this Letter we present EFTEM images formed using electrons that have undergone a silicon L(2,3) core-shell
Bo-Soon Kim et al.
Journal of nanoscience and nanotechnology, 13(5), 3622-3626 (2013-07-19)
A subwavelength structure (SWS) was formed via a simple chemical wet etching using a gold (Au) catalyst. Single nano-sized Au particles were fabricated by metallic self-aggregation. The deposition and thermal annealing of the thin metallic film were carried out. Thermal
Min Joon Huang et al.
Journal of nanoscience and nanotechnology, 13(6), 3810-3817 (2013-07-19)
In this work, we demonstrated a silicon nanowire (SiNW) biosensing platform capable of simultaneously identifying different Dengue serotypes on a single sensing chip. Four peptide nucleic acids (PNAs), specific to each Dengue serotypes (DENV-1 to DENV-4), were spotted on different
Jaewoo Lee et al.
Journal of nanoscience and nanotechnology, 13(5), 3495-3499 (2013-07-19)
A spin-casting process for fabricating polycrystalline silicon sheets for use as solar cell wafers is proposed, and the parameters that control the sheet thickness are investigated. A numerical study of the fluidity of molten silicon indicates that the formation of

Artigos

Synthesis of Melting Gels Using Mono-Substituted and Di-Substituted Alkoxysiloxanes

Hybrid organic-inorganic sol-gel materials containing silica were first called “ORMOSILs” in 1984.

Protocolos

Negative Photoresist Procedure

Our photoresist kit was designed to have the necessary chemical components for each step in the lithographic process. The component materials are provided in pre-weighed quantities for your convenience. Etchants are available separately so that the proper etchant can be chosen for a variety of substrate choices.

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica