Merck
Todas as fotos(2)

687502

Sigma-Aldrich

Titanium(IV) isopropoxide

packaged for use in deposition systems

Todas as fotos(2)
Sinônimo(s):
TTIP, Tetraisopropyl orthotitanate
Fórmula linear:
Ti[OCH(CH3)2]4
Número CAS:
546-68-9
Peso molecular:
284.22
Beilstein:
3679474
Número EC:
208-909-6
Número MDL:
MFCD00008871
ID de substância PubChem:
329761133

Nível de qualidade

100

teor

99.999%

forma

liquid

reaction suitability

core: titanium
reagent type: catalyst

índice de refração

n20/D 1.464 (lit.)

pb

232 °C (lit.)

pf

14-17 °C (lit.)

densidade

0.96 g/mL at 20 °C (lit.)

SMILES string

CC(C)O[Ti](OC(C)C)(OC(C)C)OC(C)C

InChI

1S/4C3H7O.Ti/c4*1-3(2)4;/h4*3H,1-2H3;/q4*-1;+4

InChI key

VXUYXOFXAQZZMF-UHFFFAOYSA-N

Procurando produtos similares? Visit Guia de comparação de produtos

Categorias relacionadas

Descrição geral

Atomic number of base material: 22 Titanium

Aplicação

Precursors Packaged for Depositions Systems
Novel metal oxide/phosphonate hybrids were formed from titanium(IV) isopropoxide in a two-step sol-gel process. Starting material for barium-strontium-titanate thin films. Used to make porous titanosilicates, potential ion-exchange materials for cleanup of radioactive wastes. Applied in the formation of a heterosupermolecule consisting of a TiO2 nanocrystallite-viologen electron acceptor complex whose light-induced electron transfer has been demonstrated.

Embalagem

25 g in stainless steel cylinder

Pictogramas

FlameExclamation mark
GHS02,GHS07

Palavra indicadora

Warning

Frases de perigo

H226 - H319 - H336

Classificações de perigo

Eye Irrit. 2 - Flam. Liq. 3 - STOT SE 3

Órgãos-alvo

Central nervous system

Código de classe de armazenamento

3 - Flammable liquids

WGK

WGK 1

Ponto de fulgor (ºF)

105.8 °F - Pensky-Martens closed cup

Ponto de fulgor (ºC)

41 °C - Pensky-Martens closed cup

Equipamento de proteção individual

Eyeshields, Faceshields, Gloves, type ABEK (EN14387) respirator filter

Certificado de análise

Insira o número de lote para pesquisar o Certificado de análise (COA).

Certificado de origem

Insira o número de lote para pesquisar o Certificado de origem (COO).

Mais documentos

Pressure-Temperature Nomograph
Structure Search

Quotes and Ordering

Bulk Quote-Order Product

  1. Which document(s) contains shelf-life or expiration date information for a given product?

    If available for a given product, the recommended re-test date or the expiration date can be found on the Certificate of Analysis.

  2. How do I get lot-specific information or a Certificate of Analysis?

    The lot specific COA document can be found by entering the lot number above under the "Documents" section.

  3. How do I find price and availability?

    There are several ways to find pricing and availability for our products. Once you log onto our website, you will find the price and availability displayed on the product detail page. You can contact any of our Customer Sales and Service offices to receive a quote.  USA customers:  1-800-325-3010 or view local office numbers.

  4. What is the Department of Transportation shipping information for this product?

    Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product. 

  5. Can the empty deposition cylinders be refilled?

    Yes, we are able to refill these cylinders through our SAFC Hitech group.  Please contact our Technical Service department by email at techserv@sial.com, and they will forward you to the appropriate SAFC Hitech representative for a quote.

  6. My question is not addressed here, how can I contact Technical Service for assistance?

    Ask a Scientist here.

Tadashi Kokubo et al.
Journal of materials science. Materials in medicine, 19(2), 695-702 (2007-07-11)
A rectangular specimen of polyethylene terephthalate (PET) was soaked in a titania solution composed of titanium isopropoxide, water, ethanol and nitric acid at 25 degrees C for 1 h. An amorphous titanium oxide was formed uniformly on the surface of
Manas K Panda et al.
Dalton transactions (Cambridge, England : 2003), 39(9), 2428-2440 (2010-02-18)
Controlled oxidation of organic sulfides to sulfoxides under ambient conditions has been achieved by a series of titanium isopropoxide complexes that use environmentally benign H(2)O(2) as a primary oxidant. Specifically, the [N,N'-bis(2-oxo-3-R(1)-5-R(2)-phenylmethyl)-N,N'-bis(methylene-R(3))-ethylenediamine]Ti(O(i)Pr)(2) [R(1) = t-Bu, R(2) = Me, R(3) =
Yann Sarazin et al.
Dalton transactions (Cambridge, England : 2003), (2)(2), 340-350 (2005-12-21)
The reactions of the bulky amino-bis(phenol) ligand Me(2)NCH(2)CH(2)N[CH(2)-3,5-Bu(t)(2)-C(6)H(2)OH-2](2)(1-H(2)) with Zn[N(SiMe(3))(2)](2)(4), [Mg[N(SiMe(3))(2)](2)](2)(5) and Ca[N(SiMe(3))(2)](2)(THF)(2)(6) yield the complexes 1-Zn, 1-Mg and 1-Ca in good yields. The X-ray structure of 1-Ca showed the complex to be dimeric, with calcium in a distorted octahedral
Henrique Antonio Mendonça Faria et al.
Materials science & engineering. C, Materials for biological applications, 56, 260-268 (2015-08-08)
The structural and electronic properties of titanium oxide nanotubes (TiO2) have attracted considerable attention for the development of therapeutic devices and imaging probes for nanomedicine. However, the fluorescence response of TiO2 has typically been within ultraviolet spectrum. In this study
Laszlo Sipos et al.
Biomacromolecules, 6(5), 2570-2582 (2005-09-13)
A poly(styrene-b-isobutylene-b-styrene) (SIBS) triblock polymer is employed as the polymer drug carrier for the TAXUS Express2 Paclitaxel-Eluting Coronary Stent system (Boston Scientific Corp.). It has been shown that the release of paclitaxel (PTx) from SIBS can be modulated by modification
Exibir todos os documentos relacionados

Artigos

Atomic Layer Deposition (ALD) — A Versatile Tool for Nanostructuring

Some of the most innovative uses for atomic layer deposition (ALD) include synthesis of novel structures, area-selective deposition of materials, low-temperature ALD deposition, and temperature-sensitive subtrates.

The Savannah ALD System - An Excellent Tool for Atomic Layer Deposition

Atomic Layer Deposition (ALD) is a coating technology that allows perfectly conformal deposition onto complex 3D surfaces. The reason for this uniform coating lies in the saturative chemisorption of sequential cycles of precursor vapors.

Nanocomposite Coatings with Tunable Properties Prepared by Atomic Layer Deposition

Nanocomposite Coatings with Tunable Properties Prepared by Atomic Layer Deposition

Dye-Sensitized and Perovskite Solar Cells: Interface Engineering by Atomic Layer Deposition

Since the demonstration of the first practical solar cell 60 years ago, research on novel materials, improved solar cell design and structure, and innovative manufacturing processes have all contributed to a continuous increase in the efficiency of photovoltaic (PV) devices.

Ver tudo

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica