Todas as fotos(1)

767506

Sigma-Aldrich

Titanium

sputtering target, diam. × thickness 2.00 in. × 0.25 in., 99.995% trace metals basis

Empirical Formula (Hill Notation):
Ti
Número CAS:
Peso molecular:
47.87
Número EC:
Número MDL:
ID de substância PubChem:
NACRES:
NA.23

Nível de qualidade

100

teor

99.995% trace metals basis

forma

solid

temperatura de autoignição

860 °F

reaction suitability

core: titanium

resistividade

42.0 μΩ-cm, 20°C

diâmetro × espessura

2.00 in. × 0.25 in.

pb

3287 °C (lit.)

pf

1660 °C (lit.)

densidade

4.5 g/mL at 25 °C (lit.)

SMILES string

[Ti]

InChI

1S/Ti

InChI key

RTAQQCXQSZGOHL-UHFFFAOYSA-N

Aplicação

Sputtering is a process whereby atoms are ejected from a solid target material due to bombardment of the target by energetic particles. The extreme miniaturization of components in the semiconductor and electronics industry requires high purity sputtering targets for thin film deposition.

Embalagem

1 ea in rigid mailer

Código de classe de armazenamento

13 - Non Combustible Solids

WGK

nwg

Ponto de fulgor (ºF)

Not applicable

Ponto de fulgor (ºC)

Not applicable

Certificado de análise

Certificado de origem

Kostantinidis, S.; et al.
The European Physical Journal - Applied Physics, 56, 24002/1-24002/1 (2011)
Helmersson; U.; et al.
Thin Solid Films, 513, 1-1 (2006)
A Kurbad et al.
International journal of computerized dentistry, 16(2), 125-141 (2013-08-13)
This article presents two novel options for lithium-disilicate restorations supported by single-tooth implants. By using a Ti-Base connector, hybrid abutments and hybrid abutment crowns can be fabricated for different implant systems. The latter option in particular is an interesting new
Jinho Shin et al.
Journal of nanoscience and nanotechnology, 13(8), 5807-5810 (2013-07-26)
In this study, hydroxyapatite (HA) was coated on anodized titanium (Ti) surfaces through radio frequency magnetron sputtering in order to improve biological response of the titanium surface. All the samples were blasted with resorbable blasting media (RBM). RBM-blasted Ti surface
R Khataee et al.
Journal of nanoscience and nanotechnology, 13(7), 5109-5114 (2013-08-02)
In the present study, self-cleaning and mechanical properties of white Portland cement by addition of commercial available TiO2 nanoparticles with the average particle size of 80 nm were investigated. X-ray diffraction (XRD), transmission electron microscopy (TEM) and BET were used

Artigos

Nanocomposite Coatings with Tunable Properties Prepared by Atomic Layer Deposition

Nanocomposite Coatings with Tunable Properties Prepared by Atomic Layer Deposition

Recent Progress in Spintronic Materials

Spin-based electronic (spintronic) devices offer significant improvement to the limits of conventional charge-based memory and logic devices which suffer from high power usage, leakage current, performance saturation, and device complexity.

Nanowire Synthesis: From Top-Down to Bottom-Up

The properties of many devices are limited by the intrinsic properties of the materials that compose them.

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica