- 802751
All Photos(1)
802751
Aquivion® E98-15S
membrane sheet, stabilized CF3 polymer chain ends, PFSA eq. wt. 980 g/mole SO3H, L × W × thickness 18 cm × 18 cm × 150 μm
All Photos(1)
Synonym(s):
Aquivion® SO3H, Tetrafluoroethylene-perfluoro(3-oxa-4-pentenesulfonic acid) copolymer, Ethanesulfonic acid
Linear Formula:
[CF2CF(OCF2CF2SO3H)]m[CF2CF2]n
CAS Number:
NACRES:
NA.23
Recommended Products
Looking for similar products? Visit Product Comparison Guide
Related Categories
Compare Similar Items
View Full Comparison1 of 4
This Item | 802743 | 802514 | 802727 |
|---|---|---|---|
| form membrane sheet | form membrane sheet | form membrane sheet | form membrane sheet |
| L × W × thickness 18 cm × 18 cm × 150 μm | L × W × thickness 31 cm × 31 cm × 90 μm | L × W × thickness 31 cm × 31 cm × 120 μm | L × W × thickness 31 cm × 31 cm × 50 μm |
| Quality Level 100 | Quality Level 100 | Quality Level 100 | Quality Level 100 |
Descrição geral
Aquivion® PFSA ionomer membranes are melt-extruded films based on the short-side-chain (SSC) copolymer of Tetrafluoroethylene and the Sulfonyl Fluoride Vinyl Ether (SFVE) F2C=CF-O-(CF2)2-SO2F industrially produced by Solvay Specialty Polymers. Following a film hydrolysis the perfluoropolymer′s functional groups are operative in their sulfonic acid form, SO3H.
Aplicação
Aquivion® PFSA membranes are used for electrochemical applications such as, but not limited to, polymer electrolyte fuel cells, electro-deionization systems, ozone generators, water electrolyzers, hydrogen separators and compressors, redox flow batteries as well as pervaporation or gas humidification systems.
Embalagem
Handling Note:
Membranes are packed and sealed in a barrier protection pouch inside a cardboard box to prevent damage or deterioration. It is recommendable storing the product in a clean, humidity-controlled environment protected from direct sunlight or other sources of irradiation or heat. Sheet dimensions are based on product conditioned at 23°C and about 50% relative humidity. They may slightly vary upon exposure to different ambient conditions. Maximum temperature rating is 230°C, overheating will result in polymer degradation, discoloration and release of toxic volatile decomposition products.
Membranes are packed and sealed in a barrier protection pouch inside a cardboard box to prevent damage or deterioration. It is recommendable storing the product in a clean, humidity-controlled environment protected from direct sunlight or other sources of irradiation or heat. Sheet dimensions are based on product conditioned at 23°C and about 50% relative humidity. They may slightly vary upon exposure to different ambient conditions. Maximum temperature rating is 230°C, overheating will result in polymer degradation, discoloration and release of toxic volatile decomposition products.
Informações legais
Aquivion is a registered trademark of Solvay Group
Código de classe de armazenamento
11 - Combustible Solids
WGK
WGK 3
Ponto de fulgor (ºF)
Not applicable
Ponto de fulgor (ºC)
Not applicable
Certificate of Analysis
Enter Lot Number to search for Certificate of Analysis (COA).
Certificate of Origin
Enter Lot Number to search for Certificate of Origin (COO).
More Documents
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service