KWL9A10HH1

Opticap^® XL10 Milligard^® Low Protein Binding

inlet connection diam. 9/16 in., pore size 1.2 μm, cartridge nominal length 10 in. (25 cm)

• Synonym(s): Opticap XL10 Milligard Low Protein Binding 1.2 μm 9/16 in. HB/HB
• eCl@ss: 32031610

Properties

• material: mixed cellulose esters (MCE) (low protein-binding); polyester support; polypropylene ; polypropylene housing; polypropylene vent cap; silicone seal
• Nível de qualidade: 400
• reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• esterilidade: non-sterile
• linha de produto: Opticap^® XL
• característica: hydrophilic
• manufacturer/tradename: Opticap^®
• parâmetro: 1.0 bar max. inlet pressure (15 psi) at 80 °C; 2.75 bar max. inlet pressure (40 psi) at 60 °C; 25 °C max. inlet temp.; 3.5 bar max. differential pressure (50 psid) at 25 °C; 5.5 bar max. inlet pressure (80 psi) at 23 °C; 80 psig max. inlet pressure
• technique(s): prefiltration: suitable
• C: 33.5 cm (13.2 in.)
• L: 4.2 in.
• cartridge nominal length: 10 in. (25 cm)
• diâmetro: 14.5 cm (5.7 in.)
• área de filtração: 0.8 m²
• inlet connection diam.: 9/16 in.
• inlet to outlet W: 33.5 cm (13.2 in.)
• outlet connection diam.: 9/16 in.
• Impurezas: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• gravimetric extractables: ≤255 mg/capsule
• matriz: Milligard^® LPB
• tamanho de poro: 1.2 μm nominal pore size; 1.2 μm pore size
• input: sample type liquid
• conector: inlet hose barb; outlet hose barb; (14 mm (9/16 in.) Hose Barb Inlet and Outlet)

Description

Descrição geral

Device Configuration: Capsule

Características e benefícios

Format: Single Layer

Embalagem

Double Easy-Open bag

Outras notas

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation section of OPTICAP^® XL Capsules and OPTICAP^® XLT Capsules user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Especificações

Filter Grade: Low Protein Binding Milligard^® Media

Ligação

Replaces: KW19L1HB1

Nota de preparo

Sterilization Method
3 autoclave cycles of 30 min @ 121 °C; not in-line steam sterilizable

This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Nota de análise

Gravimetric Extractables: after a 5 L flush and 24 hours in water at controlled room temperature

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L

Informações legais

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany

Exoneração de responsabilidade

EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.

Safety Information

• Código de classe de armazenamento: 4.1B - Flammable solid hazardous materials
• WGK: WGK 3