• Início
  • Resultados da busca
  • Biological response to millennial variability of dust and nutrient supply in the Subantarctic South Atlantic Ocean.

Biological response to millennial variability of dust and nutrient supply in the Subantarctic South Atlantic Ocean.

Philosophical transactions. Series A, Mathematical, physical, and engineering sciences (2014-06-04)
Robert F Anderson, Stephen Barker, Martin Fleisher, Rainer Gersonde, Steven L Goldstein, Gerhard Kuhn, P Graham Mortyn, Katharina Pahnke, Julian P Sachs
RESUMO

Fluxes of lithogenic material and fluxes of three palaeo-productivity proxies (organic carbon, biogenic opal and alkenones) over the past 100,000 years were determined using the (230)Th-normalization method in three sediment cores from the Subantarctic South Atlantic Ocean. Features in the lithogenic flux record of each core correspond to similar features in the record of dust deposition in the EPICA Dome C ice core. Biogenic fluxes correlate with lithogenic fluxes in each sediment core. Our preferred interpretation is that South American dust, most probably from Patagonia, constitutes a major source of lithogenic material in Subantarctic South Atlantic sediments, and that past biological productivity in this region responded to variability in the supply of dust, probably due to biologically available iron carried by the dust. Greater nutrient supply as well as greater nutrient utilization (stimulated by dust) contributed to Subantarctic productivity during cold periods, in contrast to the region south of the Antarctic Polar Front (APF), where reduced nutrient supply during cold periods was the principal factor limiting productivity. The anti-phased patterns of productivity on opposite sides of the APF point to shifts in the physical supply of nutrients and to dust as cofactors regulating productivity in the Southern Ocean.

MATERIAIS
Número do produto
Marca
Descrição do produto

Sigma-Aldrich
Iron, ≥99%, reduced, powder (fine)
Sigma-Aldrich
Carbonyl iron, ≥97% Fe basis
Sigma-Aldrich
Iron, powder, −325 mesh, 97%
Sigma-Aldrich
Iron, chips, 99.98% trace metals basis
Sigma-Aldrich
Iron, nanopowder, 35-45 nm particle size, 99.5% trace metals basis
Sigma-Aldrich
Iron, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)
Sigma-Aldrich
Iron, granular, 10-40 mesh, >99.99% trace metals basis
Sigma-Aldrich
Iron, foil, thickness 0.1 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Iron, foil, thickness 0.25 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Iron, wire, diam. 1.0 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Iron, carbon coated magnetic, nanopowder, 25 nm avg. part. size, 99.5% trace metals basis
Iron, IRMM®, certified reference material, 0.5 mm wire
Iron, foil, 300x300mm, thickness 0.1mm, hard, 99.5%
Sigma-Aldrich
Iron, rod, diam. 6.3 mm, 99.98% trace metals basis
Iron, foil, 25x25mm, thickness 1.0mm, as rolled, 99.5%
Iron, foil, 100x100mm, thickness 1.0mm, as rolled, 99.99+%
Iron, foil, 25x25mm, thickness 2mm, as rolled, 99.99+%
Iron, foil, 100x100mm, thickness 0.5mm, hard, 99.5%
Iron, foil, 150x150mm, thickness 3.0mm, as rolled, 99.5%
Iron, rod, 100mm, diameter 2.0mm, as drawn, 99.95%
Iron, rod, 200mm, diameter 2.0mm, as drawn, 99.99+%
Iron, rod, 500mm, diameter 9.5mm, as drawn, soft ingot 99.8+%
Iron, foil, 10mm disks, thickness 0.01mm, 99.85%
Iron, foil, 10mm disks, thickness 0.01mm, 99.99+%
Iron, foil, 10mm disks, thickness 0.020mm, 99.85%
Iron, foil, 10mm disks, thickness 0.025mm, as rolled, 99.99+%
Iron, foil, 10mm disks, thickness 0.025mm, hard, 99.5%
Iron, foil, 10mm disks, thickness 0.038mm, hard, 99.5%
Iron, foil, 10mm disks, thickness 0.05mm, as rolled, 99.99+%
Iron, foil, 10mm disks, thickness 0.05mm, hard, 99.5%