MilliporeSigma
All Photos(2)

Documents

SX0004700

Millipore

Swinnex Filter Holder

Swinnex Filter Holder, 47mm

Sign Into View Organizational & Contract Pricing

Synonym(s):
Polypropylene filter holder
eCl@ss:
32031613
NACRES:
NB.24

material

polypropylene device
silicone gasket
silicone seal

Quality Level

Agency

suitable for EPA 200.7
suitable for EPA 200.8
suitable for EPA 300

manufacturer/tradename

Swinnex®

parameter

5.2 bar max. inlet pressure (75 psi)

technique(s)

pressure filtration: suitable

L

5.4 cm

diam.

5.8 cm (2.3 in.)

filter diam.

47 mm

filtration area

13.8 cm2

prefilter diam.

42 mm , thick depth prefilter
47 mm , membrane prefilter

fitting

1/4 in. NPT inlet connection thread(s)
1/4 in. male NPT inlet fitting (with female Luer slip interior)
female Luer outlet slip

application(s)

filtration

compatibility

for use with Sterifil Aseptic System

shipped in

ambient

Related Categories

Compare Similar Items

View Full Comparison

Show Differences

1 of 4

This Item
SX0002500XX3001200SX0001300
Swinnex Filter Holder Swinnex Filter Holder, 47mm

Millipore

SX0004700

Swinnex Filter Holder

Swinnex Filter Holder Swinnex Filter Holder, 25mm

Millipore

SX0002500

Swinnex Filter Holder

Swinnex Filter Holder Swinnex Filter Holder, 13mm

Millipore

SX0001300

Swinnex Filter Holder

manufacturer/tradename

Swinnex®

manufacturer/tradename

Swinnex®

manufacturer/tradename

-

manufacturer/tradename

Swinnex®

agency

suitable for EPA 200.7

agency

suitable for ASTM® 7968, suitable for ASTM® 7979, suitable for EPA 8327

agency

-

agency

suitable for ASTM® 7968, suitable for ASTM® 7979, suitable for EPA 8327

parameter

5.2 bar max. inlet pressure (75 psi)

parameter

121 °C max. temp., 3.5 bar max. inlet pressure (50 psi)

parameter

6.9 bar max. inlet pressure (100 psi)

parameter

121 °C max. temp., 3.5 bar max. inlet pressure (50 psi)

technique(s)

pressure filtration: suitable

technique(s)

pressure filtration: suitable

technique(s)

pressure filtration: suitable

technique(s)

pressure filtration: suitable

L

5.4 cm

L

3.7 cm

L

3.3 cm

L

3.5 cm

General description

Make your own syringe filter! Swinnex filter holders give you the flexibility to select the membrane type and diameter that are most appropriate for your application. For sterile filtration, autoclave you Swinnex filter holders with the membrane in place. Ultraclean or sterilize small volumes of liquids dispensed by a syringe or install in-line to filter larger volumes.

Features & Benefits:
•Available in three sizes for a range of process volumes
•Autoclavable with filter in place for sterile filtration

SX0001300 Swinnex Filter Holder, 13 mm
SX0002500 Swinnex Filter Holder, 25 mm
SX0004700 Swinnex Filter Holder, 47 mm

Replacement Parts
SX0001301 Silicone Gaskets for 13 mm Swinnex Filter Holder
SX0002501 Silicone Gaskets for 25 mm Swinnex Filter Holder
XX2702510 Support Screen, 25 mm, polypropylene
XX1104715 Support Screen, 47 mm, polypropylene
XX1104707 O-ring (5-329) for Swinnex 47 mm Filter Holder, silicone
SX0004701 Base O-ring for Swinnex 47 mm Filter Holder, silicone
SX00047RK Replacement Parts Kit for Swinnex 47 mm Filter Holder

Principle

Pressure

Preparation Note

Sterilization Method
Autoclavable with filter in place

Legal Information

SWINNEX is a registered trademark of Merck KGaA, Darmstadt, Germany

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Protocols

This is a User Guide Dispensing Pressure Vessel Fitting Kit from Millipore.

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service