Accéder au contenu
MilliporeSigma

Sensitivity of pressure sensors enhanced by doping silver nanowires.

Sensors (Basel, Switzerland) (2014-06-06)
Baozhang Li, Chengyi Xu, Jianming Zheng, Chunye Xu
RÉSUMÉ

We have developed a highly sensitive flexible pressure sensor based on a piezopolymer and silver nanowires (AgNWs) composite. The composite nanofiber webs are made by electrospinning mixed solutions of poly(inylidene fluoride) (PVDF) and Ag NWs in a cosolvent mixture of dimethyl formamide and acetone. The diameter of the fibers ranges from 200 nm to 500 nm, as demonstrated by SEM images. FTIR and XRD results reveal that doping Ag NWs into PVDF greatly enhances the content of β phase in PVDF. This β phase increase can be attributed to interactions between the Ag NWs and the PVDF matrix, which forces the polymer chains to be embedded into the β phase crystalline. The sensitivity of the pressure sensors agrees well with the FTIR and XRD characteristics. In our experiments, the measured sensitivity reached up to 30 pC/N for the nanofiber webs containing 1.5 wt% Ag NWs, which is close to that of poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE), (77/23)]. This study may provide a new method of fabricating high performance flexible sensors at relatively low cost compared with sensors based on [P(VDF-TrFE), (77/23)].

MATÉRIAUX
Numéro du produit
Marque
Description du produit

Sigma-Aldrich
Acétone, ACS reagent, ≥99.5%
Sigma-Aldrich
N,N-Diméthylformamide, ACS reagent, ≥99.8%
Sigma-Aldrich
Acétone, suitable for HPLC, ≥99.9%
Sigma-Aldrich
N,N-Diméthylformamide, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Éthylène glycol, ReagentPlus®, ≥99%
Sigma-Aldrich
Acétone, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%
Sigma-Aldrich
N,N-Diméthylformamide, anhydrous, 99.8%
Sigma-Aldrich
Acétone, Laboratory Reagent, ≥99.5%
Sigma-Aldrich
Poly(vinylidene fluoride), powder
Sigma-Aldrich
Éthylène glycol, anhydrous, 99.8%
Sigma-Aldrich
N,N-Diméthylformamide, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
Acétone, suitable for HPLC, ≥99.8%
Sigma-Aldrich
Acétone, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.5% (GC)
Sigma-Aldrich
N,N-Diméthylformamide, ReagentPlus®, ≥99%
Sigma-Aldrich
Éthylène glycol, spectrophotometric grade, ≥99%
USP
Éthylène glycol, United States Pharmacopeia (USP) Reference Standard
Supelco
Éthylène glycol, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
N,N-Diméthylformamide, Molecular Biology, ≥99%
Sigma-Aldrich
Acétone, ACS reagent, ≥99.5%
Supelco
Acétone, analytical standard
Sigma-Aldrich
N,N-Diméthylformamide, biotech. grade, ≥99.9%
Sigma-Aldrich
Acétone, histological grade, ≥99.5%
USP
Acétone, United States Pharmacopeia (USP) Reference Standard
Supelco
Acétone, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Éthylène glycol, analytical standard
Supelco
Diméthylformamide, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Acétone, puriss., meets analytical specification of Ph. Eur., BP, NF, ≥99% (GC)
Sigma-Aldrich
N,N-Diméthylformamide, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Ethylene glycol 5 M solution
Sigma-Aldrich
Acétone, ≥99%, FCC, FG