Merck
All Photos(1)

SLGVR13SL

Millipore

Millex® PVDF syringe filter

pore size 0.22 μm, diam. 13 mm, sterile, hydrophilic

Synonym(s):
disposable syringe filter, sterile syringe filter, syringe filter

material

PVDF membrane
high-density polyethylene housing

Quality Level

description

Female Luer-Lok/Male Luer slip

sterility

ethylene oxide treated
sterile

feature

hydrophilic

packaging

pk of 100

manufacturer/tradename

Millipore SLGVR13SL

parameter

45 °C max. temp.
5.2 bar max. pressure at 75 psi

H × W

21.1 mm × 14.7 mm

diam.

13 mm

filtration area

0.65 cm2

volume

10 mL

color

natural

matrix

MF-Millipore®

pore size

0.22 μm

Compare Similar Items

View Full Comparison

Show Differences

1 of 4

This Item
SLHVR13SLSLVVR33RSSLHVR33RS
sterility

ethylene oxide treated, sterile

sterility

ethylene oxide treated, sterile

sterility

γ-irradiated, sterile

sterility

γ-irradiated, sterile

feature

hydrophilic

feature

hydrophilic

feature

hydrophilic

feature

hydrophilic

manufacturer/tradename

Millipore SLGVR13SL

manufacturer/tradename

Millipore SLHVR13SL

manufacturer/tradename

Millipore SLVVR33RS

manufacturer/tradename

Millipore SLHVR33RS

parameter

45 °C max. temp., 5.2 bar max. pressure at 75 psi

parameter

45 °C max. temp., 7 bar max. inlet pressure at 100 psi

parameter

10 bar max. inlet pressure at 145 psi, 45 °C max. temp.

parameter

10 bar max. inlet pressure at 145 psi, 45 °C max. temp.

filtration area

0.65 cm2

filtration area

-

filtration area

-

filtration area

-

General description

Millex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.

Application

A 13 mm diameter sterile syringe filter with a 0.22 μm pore size hydrophilic PVDF membrane. Comes in a pack of 100.
Sterilization of tissue culture media, protein solutions or aqueous solutionsUltra-Low Protein Binding

Features and Benefits

Features & Benefits:
  • Tailored to a variety of applications based on membrane type, housing and validation rating
  • Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
  • Low extractables and low absorption membranes for minimum sample losses
  • Faster flow rates and higher operating pressures for high performance needs


Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule Components

Other Notes

Directions for Use

  • Organism Retention: Microorganisms
  • Mode of Action: Filtering
  • Application: Sterile Filtration
  • Intended Use: Sterilization of small volumes of aqueous solutions
  • Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
  • Storage Statement: Store in dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

MF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, Germany

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (Example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Customers Also Viewed

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service