All Photos(1)
TANKMPK01
Vent Filter
Protects purified water stored in 30/60/100 PE tanks from airborne contaminants.
All Photos(1)
Synonym(s):
Vent Filter for PE Tank (Type 2 Water)
eCl@ss:
33050190
NACRES:
JA.14
Recommended Products
description
Prevents contamination of Elix® Type 2 water stored in 30/60/100 PE storage tanks
Quality Level
packaging
pkg of 1 unit
H
9 cm (3.5 in.)
pore size
0.45 μm pore size
compatibility
for use with AFS®
for use with Elix® Advantage
for use with Elix® Essential UV
for use with Elix® Essential
for use with Elix® Reference
for use with Milli-Q® Integral
for use with RiOs™ Essential
shipped in
ambient
Looking for similar products? Visit Product Comparison Guide
Related Categories
General description
This Vent Filter is designed to provide advanced protection to high-resistivity Elix® Type 2 pure water stored in 30/60/100 polyethylene (PE) tanks.
A vent filter is used to filter air entering the water reservoir. As the reservoir is emptied of water, the air entering the system passes through the filter.
The vent filters contain a combination of purification media carefully selected to remove airborne contaminants that could lower the quality of the stored pure water.
The filter′s cartridges are made of polypropylene, polyethersulfone (PES) and styrene-acrylonitrile (SAN). The cartridges are carefully assembled following a dichloromethane (DCM)-free process.
The vent filter is replaced once a year for optimal results.
For use with 30/60/100 L PE tanks fed by Elix® Type 2 pure water produced by AFS® Essential and Elix® Advantage/Essential/Reference systems.
A vent filter is used to filter air entering the water reservoir. As the reservoir is emptied of water, the air entering the system passes through the filter.
The vent filters contain a combination of purification media carefully selected to remove airborne contaminants that could lower the quality of the stored pure water.
The filter′s cartridges are made of polypropylene, polyethersulfone (PES) and styrene-acrylonitrile (SAN). The cartridges are carefully assembled following a dichloromethane (DCM)-free process.
The vent filter is replaced once a year for optimal results.
For use with 30/60/100 L PE tanks fed by Elix® Type 2 pure water produced by AFS® Essential and Elix® Advantage/Essential/Reference systems.
Application
The vent filter provides advanced protection against airborne contaminants.
Packaging
1 ea
Features and Benefits
The Vent Filter is equipped with:
- Activated carbon to absorb volatile organics.
- Soda Lime bed to remove carbon dioxide.
- 0.65 μm hydrophobic filter to prevent particulates and bacteria from entering the tank.
Other Notes
Directions for Use
- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: General laboratory analysis
- Intended Use: Air purification
- Instructions for Use: This item provides water filtered through 0.45 μm membranes and is a device that meets requirements under FIFRA. Refer to system equipment user guide section "Using the System" (provided with the system).
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
AFS is a registered trademark of Merck KGaA, Darmstadt, Germany
ELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
RIOS is a trademark of Millipore Corporation
Certificate of Analysis
Enter Lot Number to search for Certificate of Analysis (COA).
Certificate of Quality
Enter Lot Number to search for Certificate of Quality (COQ).
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service