Merck
All Photos(1)

29391-U

Supelco

Certified QSertVial (vial with fused-in insert) kit, screw thread, 12 x 32 mm, 0.3 mL, pkg of 100

clear glass vial, PTFE/silicone septum (bonded), thread for 9 mm

NACRES:
NB.11

material

PTFE/silicone septum (bonded)
blue polypropylene hole cap
clear glass vial

feature

closure type blue polypropylene hole cap
closure type screw top vial

packaging

pkg of 100 ea

O.D. × H × I.D.

12 mm × 32 mm × 6 mm

volume

0.3 mL

fitting

thread for 9 mm

Looking for similar products? Visit Product Comparison Guide

Related Categories

Compare Similar Items

View Full Comparison

1 of 4

This Item
29392-U29398-U29401-U
material

PTFE/silicone septum (bonded), blue polypropylene hole cap, clear glass vial

material

PTFE/silicone septum (bonded with slit), blue polypropylene hole cap, clear glass vial

material

PTFE/silicone septum (bonded), amber glass vial, blue polypropylene hole cap

material

PTFE/silicone septum (bonded with slit), amber glass vial, blue polypropylene hole cap

feature

closure type blue polypropylene hole cap, closure type screw top vial

feature

closure type blue polypropylene hole cap, closure type screw top vial

feature

closure type blue polypropylene hole cap, closure type screw top vial

feature

closure type blue polypropylene hole cap, closure type screw top vial

volume

0.3 mL

volume

0.3 mL

volume

0.3 mL

volume

0.3 mL

fitting

thread for 9 mm

fitting

thread for 9 mm

fitting

thread for 9 mm

fitting

thread for 9 mm

packaging

pkg of 100 ea

packaging

pkg of 100 ea

packaging

pkg of 100 ea

packaging

pkg of 100 ea

O.D. × H × I.D.

12 mm × 32 mm × 6 mm

O.D. × H × I.D.

12 mm × 32 mm × 6 mm

O.D. × H × I.D.

12 mm × 32 mm × 6 mm

O.D. × H × I.D.

12 mm × 32 mm × 6 mm

General description

The QSertVial is the ultimate microsampling device. It contains a 300 μL glass insert that is fused to the vial to form one precise integral unit. The rim of the insert is positioned slightly above the top of the vial so the septum can make a secure seal with the closure, eliminating evaporation and cross contamination. The insert is centered into the vial, 2 mm from the bottom, allowing for consistent sample recovery and eliminating problems causied by variation in insert depth. It is compatible with the majority of autosamplers in the market. It is available in a variety of kit configurations.
  • Evaporation and cross contamination between insert and vial is eliminated
  • Higher sample recovery with either bottom loading or side loading needles (point style #2 and #5). Residual dead volume can be as low as 4 μL, depending on precision adjustment of the instrument.
  • Consistent sample recovery from vial to vial because the insert is always at the same precise depth within the vial.
  • Wide mouth opening has larger target area reducing the possibility of bent needles.
  • Easy sample identification of white mat finish marking panel.
  • Available in clear or amber glass.

Suitability

Autosampler compatibility:
Agilent
Agilent 1050/1090A
Agilent 1100/1200
Agilent 7673A, 7683
Agilent 5890/7985A/6850/6890
LEAP Technologies
CTC LC PAL, GC PAL
CombiPAL
HTC PAL/HTS PAL
Shimadzu LC Autosamplers
SIL-HTa/SIL-HTc
SIL-10ADvp
SIL-10A/SIL-10Ai/SIL-10AP
Varian
CP-9010
8000/8035/8100/8200
9100/9090/9095
Vista
Waters
Alliance 2690/2695
Alliance 2790/2795
Acquity

Legal Information

QSertVial is a trademark of QIS, Inc.

Storage Class Code

11 - Combustible Solids

WGK

WGK 3

Flash Point(F)

Not applicable

Flash Point(C)

Not applicable


Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (Example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service