Documents
Z683299
XPell™ indicating pellets for peroxides prevention
CE for organic solvents
Recommended Products
manufacturer/tradename
XploSafe
Looking for similar products? Visit Product Comparison Guide
General description
Directions: For each liter of solvent, add one tablespoon (approx 10 g) of XPell CE. XPell CE neutralizes peroxides present in the solvent and peroxides that form over time. The solvent is protected as long as Xpell CE pellets remain greenish gray. A color change to a yellow/pale color indicates that the protection is exhausted. Once this change occurs, add more pellets to the solvent until the color of the additional pellets remain dark greenish gray.
Note: XPell CE works by converting reactive, explosive peroxides into nominally non-reactive alcohols that are not likely to interfere with UV-VIS measurements, most analytical methods, and organic reactions and separations. For most solvents, the purity will remain high (impurities less than 0.1%) for over 12 months even with continuous exposure to oxygen and light. For many analytical uses, an open bottle with XPell CE is expected to remain viable (impurities 100 ppm or less) for over two months or longer depending on the storage conditions. Given the non-reactive nature of the byproducts, many applications will be able to use the solvent protected with XPell CE for a much longer period of time. The user is encouraged to verify that the products generated from peroxide neutralization do not cause any interference with their chosen analytical method.
80 grams (sufficient for treating up to 8 L of solvent)
Legal Information
related product
Signal Word
Warning
Hazard Statements
Precautionary Statements
Hazard Classifications
Eye Irrit. 2
Storage Class Code
11 - Combustible Solids
WGK
WGK 3
Flash Point(F)
Not applicable
Flash Point(C)
Not applicable
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.
Difficulty Finding Your Product Or Lot/Batch Number?
How to Find the Product Number
Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (Example: T1503).
Example:
Additional examples:
705578-5MG-PW
PL860-CGA/SHF-1EA
MMYOMAG-74K-13
1000309185
enter as 1.000309185)
Having trouble? Feel free to contact Technical Service for assistance.
How to Find a Lot/Batch Number for COA
Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.
Aldrich Products
For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').
For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').
For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.
Not Finding What You Are Looking For?
In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service