Skip to Content
Merck
  • Characterization of polychlorinated dibenzo-p-dioxins and dibenzofurans, dioxin-like polychlorinated biphenyls, and polychlorinated naphthalenes in the environment surrounding secondary copper and aluminum metallurgical facilities in China.

Characterization of polychlorinated dibenzo-p-dioxins and dibenzofurans, dioxin-like polychlorinated biphenyls, and polychlorinated naphthalenes in the environment surrounding secondary copper and aluminum metallurgical facilities in China.

Environmental pollution (Barking, Essex : 1987) (2014-07-02)
Jicheng Hu, Minghui Zheng, Wenbin Liu, Zhiqiang Nie, Changliang Li, Guorui Liu, Ke Xiao
ABSTRACT

Unintentionally produced persistent organic pollutants (UP-POPs) were determined in ambient air from around five secondary non-ferrous metal processing plants in China, to investigate the potential impacts of the emissions of these plants on their surrounding environments. The target compounds were polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), dioxin-like polychlorinated biphenyls (dl-PCBs), and polychlorinated naphthalenes (PCNs). The PCDD/F, dl-PCB, and PCN concentrations in the ambient air downwind of the plants were 4.70-178, 8.23-7520 and 152-4190 pg/m(3), respectively, and the concentrations upwind of the plants were lower. Clear correlations were found between ambient air and stack gas concentrations of the PCDD/Fs, dl-PCBs, and PCNs among the five plants, respectively. Furthermore, the UP-POPs homolog and congener patterns in the ambient air were similar to the patterns in the stack gas samples. These results indicate that UP-POPs emissions from the plants investigated have obvious impacts on the environments surrounding the plants.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Copper, wire, diam. 0.64 mm, 99.995% trace metals basis
Sigma-Aldrich
Copper, wire, diam. 1.0 mm, ≥99.9%
Sigma-Aldrich
Aluminum, granular, <1 mm, 99.7% trace metals basis
Continuous cast copper (O), BCR®, certified reference material, rod
Dibenzo[b,d]furan, BCR®, certified reference material
Aluminum, IRMM®, certified reference material, 1.0 mm wire
Aluminum, IRMM®, certified reference material, 1.0 mm foil
Sigma-Aldrich
Copper, foil, ≥99.8% (complexometric)
Copper, tube, 100mm, outside diameter 1.75mm, inside diameter 0.33mm, wall thickness 0.71mm, as drawn, 99.9%
Copper - O.F.H.C., foil, 150x150mm, thickness 2.0mm, half hard, 99.95+%
Copper, insulated wire, 50m, conductor diameter 0.1mm, insulation thickness 0.015mm, 10-30 micron polyesterimide insulation, 99.9%
Sigma-Aldrich
Copper, turnings, purum p.a., ≥99.0%
Copper, wire reel, 50m, diameter 0.15mm, annealed, silver plated, 99.9%
Copper - O.F.H.C., rod, 200mm, diameter 12.7mm, as drawn, 99.95+%
Copper - O.F.H.C., wire reel, 100m, diameter 0.80mm, as drawn, 99.95+%
Copper - O.F.H.C., foil, 50mm disks, thickness 0.5mm, half hard, 99.95+%
Copper - O.F.H.C., rod, 100mm, diameter 6.35mm, as drawn, 99.95+%
Copper, rod, 100mm, diameter 9.5mm, hard, 99.9%
Copper - O.F.H.C., foil, 10mm disks, thickness 0.7mm, half hard, 99.95+%
Copper, tube, 500mm, outside diameter 0.75mm, inside diameter 0.23mm, wall thickness 0.26mm, as drawn, 99.9%
Copper, mesh, 65x65mm, nominal aperture 0.2mm, thickness 0.004mm, wire diameter 0.0125mm, 118 wires/inch, open area 88%, electro-formed mesh
Copper, insulated wire, 100m, conductor diameter 0.5mm, insulation thickness 0.06mm, polyimide insulation
Copper, wire reel, 2000m, diameter 0.075mm, annealed, 99.9%
Copper - O.F.H.C., foil, 15mm disks, thickness 0.125mm, hard, 99.95+%
Copper - O.F.H.C., foil, 50x50mm, thickness 2.0mm, half hard, 99.95+%
Copper, insulated wire, 100m, conductor diameter 0.1mm, insulation thickness 0.015mm, 10-30 micron polyesterimide insulation, 99.9%
Copper - O.F.H.C., foil, 10m coil, thickness 0.010mm, coil width 25mm, hard, 99.95+%
Copper - O.F.H.C., foil, 5m coil, thickness 0.1mm, hard, 99.95+%
Copper, microfoil, disks, 10mm, thinness 0.25μm, specific density 219.9μg/cm2, permanent mylar 3.5μm support, 99.99+%
Copper - O.F.H.C., foil, 0.5m coil, thickness 0.006mm, hard, 99.95+%