PEDOT content, ~0.14%
PSS content, ~2.6%
2.8 wt % dispersion in H2O
<300 ppm Na
<200 nm, coeff var >95%
<20 cP(20 °C)
¿Está buscando productos similares? Visit Guía de comparación de productos
Eye Dam. 1 - Skin Corr. 1
8B - Non-combustible, corrosive hazardous materials
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
If available for a given product, the recommended re-test date or the expiration date can be found on the Certificate of Analysis.
The lot specific COA document can be found by entering the lot number above under the "Documents" section.
There are several ways to find pricing and availability for our products. Once you log onto our website, you will find the price and availability displayed on the product detail page. You can contact any of our Customer Sales and Service offices to receive a quote. USA customers: 1-800-325-3010 or view local office numbers.
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
This PEDOT:PSS product is based on hole-doped or P-type polymers. PEDOT can be n-doped, but the materials are too unstable to be of any commercial value.
Please see the attached chart showing the spin coating curve for product 560596, poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate).
Deposited poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), PEDOT:PSS, films can easily withstand temperatures in excess of 200°C for short duration and around 70°C in continuous service. The aqueous dispersions of PEDOT:PSS, however, can be damaged by heating above 50°C for a prolonged period.
Conductivity measurements should be performed on poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), PEDOT/PSS, films deposited on flat substrates. This dispersion should be deposited as a thin and homogeneous layer on a flat substrate using deposition techniques, such as spin-coating or doctor blading. The layer thickness can be determined by scratching the film off the substrate in places with a razor blade and scanning the stylus of a mechanical or optical profilometer across the scratched region(s). The sheet resistivity can then be measured with conventional four-point probes.
Yes, applied PEDOT:PSS films can be patterned by laser ablation.
Ask a Scientist here.
Tutorial Lithography Nanopatterning at Sigma-Aldrich. Lithography, based on traditional ink-printing techniques, is a process for patterning various layers, such as conductors, semiconductors, or dielectrics, on a surface.
In the emerging field of organic printable electronics, such as OLEDs and organic photovoltaics (OPVs), there is a significant need for improved organic conducting and semiconducting materials. This paper reports our recent progress in two fields: 1) the development of solvent-based dispersions of the intrinsically conducting polymer (ICP) poly(3,4- ethylenedioxythiophene) (PEDOT) and 2) the synthesis of new electron-deficient (n-type) semiconducting polymers.
Find advantages of inorganic interface layer inks for organic electronic & other applications.
Conducting polymers such as polyaniline, polythiophene and polyfluorenes are now much in the spotlight for their applications in organic electronics and optoelectronics.
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.Póngase en contacto con el Servicio técnico