Merck
Todas las fotos(1)

SVGLA25NB6

Millipore

Durapore® 0.22 µm, OptiScale® Capsule

OptiScale® 25, filtration area 3.5 cm2

Sinónimos:
Durapore® 0.22 μm Optiscale 25mm NB
eCl@ss:
32031610
NACRES:
NB.24

material

PVDF membrane
polypropylene
polypropylene support
polypropylene vent cap

Nivel de calidad

reg. compliance

meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)

esterilidad

non-sterile

sterilization compatibility

autoclavable compatible

Línea del producto

OptiScale® 25

característica

hydrophilic

manufacturer/tradename

OptiScale®

parámetro

4.1 bar max. inlet pressure (60 psi) at 25 °C
60 psi max. differential pressure (4.1 bar) at 25 °C (forward)

technique(s)

sterile filtration: suitable

L

3.9 cm (1.52 in.)

diám.

3.1 cm (1.2 in.)

filtración área

3.5 cm2

impurezas

≤0.25 EU/mL (LAL test, Aqueous extraction)
<0.25  EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

matriz

Durapore®

tamaño de poro

0.22 μm

input

sample type liquid

adaptador

female Luer-Lok® inlet connection
male Luer-Lok® outlet connection
(Female Luer-Lok® Inlet/Male Luer Slip Outlet)

enviado en

ambient

Categorías relacionadas

Comparar elementos similares

Ver comparación completa

Show Differences

1 of 4

Este artículo
SVVLA25NB6SV03A25NB6SHGLA25NB6
sterility

non-sterile

sterility

non-sterile

sterility

non-sterile

sterility

non-sterile

product line

OptiScale®

product line

OptiScale®

product line

OptiScale®

product line

OptiScale®

feature

hydrophilic

feature

hydrophilic

feature

hydrophilic

feature

hydrophilic

technique(s)

sterile filtration: suitable

technique(s)

sterile filtration: suitable

technique(s)

sterile filtration: suitable

technique(s)

sterile filtration: suitable

filtration area

3.5 cm2

filtration area

3.5 cm2

filtration area

3.5 cm2

filtration area

3.5 cm2

Descripción general

Device Configuration: Capsule

Otras notas

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use

  • Organism Retention: Bacterial
  • Mode of Action: Filtration (size exclusion)
  • Application: Protein purification
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer installation and wetting sections of OPTISCALE®-25 user guide
  • Storage Statement: Please refer OPTISCALE®-25 user guide
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Nota de preparación

Sterilization Method
1 autoclave cycle of 60 min @ 123 °C
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Nota de análisis

TOC/Conductivity
After sterilization and a controlled water flush of 15 mL, samples exhibited less than 500 ppb TOC per USP <64> and less than 1.3 µS/cm per USP <64>.
This product was tested and passes the USP <78> test for particulates in injectables.

Información legal

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
OPTISCALE is a registered trademark of Merck KGaA, Darmstadt, Germany

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Las referencias de los producto se combinan con los tamaños de envase y las cantidades cuando se muestran en la página web, por ejemplo: T1503-25G. Asegúrese de introducir el número de producto ÚNICAMENTE en el campo del Número de producto (Ejemplo T1503).

Ejemplo

T1503
Referencia del producto
-
25G
Tamaño del envase/cantidad

Otros ejemplos

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

introducir como1.000309185)

¿Tiene algún problema? No dude en ponerse en contacto con nosotros Servicio técnico para asistencia

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Productos Aldrich

  • Si encuentra un número de lote como TO09019TO, introduzca el número de lote 09019TO sin las dos primeras letras.

  • Si encuentra un número de lote con un código de entrada como 05427ES-021, introduzca el número 05427ES sin el código de entrada -021.

  • Si encuentra un número de lote con un código de entrada como STBB0728K9, introduzca el código de lote STBB0728 sin el código de entrada K9.

¿No ha encontrado lo que estaba buscando?

En algunos casos, puede que un COA no esté disponible en la página web. Si su búsqueda no encontró el COA puede solicitarlo.

Solicitar COA

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico