Merck
Todas las fotos(2)

109827

Sigma-Aldrich

2-Propanol

Laboratory Reagent, ≥99.5%

Sinónimos:
IPA, Isopropanol, sec-Propyl alcohol, Isopropyl alcohol
Fórmula lineal:
(CH3)2CHOH
Número de CAS:
Peso molecular:
60.10
Beilstein:
635639
Número de EC:
Número MDL:
ID de la sustancia en PubChem:
NACRES:
NA.21

grado

Laboratory Reagent

Nivel de calidad

100

densidad de vapor

2.1 (vs air)

presión de vapor

33 mmHg ( 20 °C)
44 mmHg ( 25 °C)

ensayo

≥99.5%

formulario

liquid

temp. de autoignición

750 °F

lim. expl.

2.0-12.7 %, 93 °C

impurezas

≤0.2% water

residuo de evap.

≤0.003%

índice de refracción

n20/D 1.377 (lit.)

pH

7.0 (20 °C)

bp

82 °C (lit.)

mp

−89.5 °C (lit.)

solubilidad

water: soluble

densidad

0.785 g/mL at 25 °C (lit.)

SMILES string

CC(C)O

InChI

1S/C3H8O/c1-3(2)4/h3-4H,1-2H3

InChI key

KFZMGEQAYNKOFK-UHFFFAOYSA-N

¿Está buscando productos similares? Visit Guía de comparación de productos

Categorías relacionadas

Descripción general

2-Propanol is a secondary alcohol. It has been tested as a substitute to fuel for use in various fuel cells. CuO powder dissolved in 2-propanol has been used for the laser ablation assisted synthesis of Cu colloids. Suspension of 2-propanol with Zn(NO3)2 has been employed for the fabrication of titanium dioxide-coated stainless steel (P25-TiO2/SS) photoanode coated with uniformly thick layer of P25-TiO2. This photoanode was used for the electrochemical photocatalytic (ECPC) degradation process.

Aplicación

2-Propanol (Isopropanol, Isopropyl alcohol) may be used for washing during the synthesis of PolyHIPEs (Polymerized high internal phase emulsion monoliths) of ethylene glycol dimethacrylate (EGDMA) and styrene/divinylbenzene.

Envase

1, 4 L in glass bottle
18, 20 L in steel drum

pictogramas

FlameExclamation mark

Palabra de señalización

Danger

Frases de peligro

Clasificaciones de peligro

Eye Irrit. 2 - Flam. Liq. 2 - STOT SE 3

Órganos de actuación

Central nervous system

Código de clase de almacenamiento

3 - Flammable liquids

WGK

WGK 1

Punto de inflamabilidad F

53.6 °F - closed cup

Punto de inflamabilidad C

12.0 °C - closed cup

Certificado de Análisis

Introduzca el número de lote para buscar un certificado de análisis (COA).

Certificado de origen

Introduzca el número de lote para buscar un Certificado de origen (COO).

  1. Which document(s) contains shelf-life or expiration date information for a given product?

    If available for a given product, the recommended re-test date or the expiration date can be found on the Certificate of Analysis.

  2. How do I get lot-specific information or a Certificate of Analysis?

    The lot specific COA document can be found by entering the lot number above under the "Documents" section.

  3. Who do I contact about larger solvent volume needs?

    Email us at labessentials@sial.com or visit Sigma-Aldrich Fine Chemicals for development and manufacturing-scale inquiries: safcglobal@sial.com

  4. How do I know what packaging options are available for a solvent?

    The Solvent Center gives you the ability to review all the specifications associated with our solvent packaging. This includes physical dimensions, closure types, dispensing methods, UN/DOT Rating as well as solvent compatibility. Visit the Solvent Center.

  5. Who do I contact if I need a solvent blend, which you do not carry?

    Email us at labessentials@sial.com. For a complete listing of all our Solvent blends, visit the Solvent Center

  6. The dispensing of solvents provides some challenges due to the number of container options available. What dispensing options are available for each container?

    The Sigma-Aldrich Solvent Center provides numerous dispensing options for each container type. For a complete listing of all our dispensing options, visit the Solvent Center.

  7. Which solvent grade should I be using for my application?

    Sigma-Aldrich Solvent Applications Table gives a guideline to common applications and the appropriate solvent grades.  Visit: Solvents

  8. What are the options for drying solvents? 

    Sigma-Aldrich offers a full range of high-purity solvents with extremely low water levels specifically manufactured for moisture sensitive Organic and Biotech applications.  Sigma-Aldrich also carries various drying agents such as molecular sieves, which are typically compatible with organic solvents.

  9. What apparatus do you recommend for HPLC solvent filtration?

    The Sigma-Aldrich Vacuum Filtration Assembly gives you all the components you need including: funnel top, fritted glass funnel support, filtration flask, aluminum clamp, and silicone stopper.  The Acrodisc Syringe Filters offer high quality filtration for analytical samples, certified for HPLC to ensure low extractable and available in a broad range of membranes to meet sample compatibility requirements.

  10. Can you recommend a Solvent Extractor for organics from aqueous solution?

    Solvent extractors are often used for the quantitative extraction of organics from aqueous solutions and separations in immunoassays. The MIXXOR system has been applied successfully in many laboratory solvent extraction operations and is ideal for the rapid screening of alternative solvents for specific extraction problems.

  11. How do I find price and availability?

    There are several ways to find pricing and availability for our products. Once you log onto our website, you will find the price and availability displayed on the product detail page. You can contact any of our Customer Sales and Service offices to receive a quote.  USA customers:  1-800-325-3010 or view local office numbers.

  12. What is the Department of Transportation shipping information for this product?

    Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product. 

  13. My question is not addressed here, how can I contact Technical Service for assistance?

    Ask a Scientist here.

Polymerized high internal phase emulsion monoliths for the chromatographic separation of engineered nanoparticles.
Hughes JM, et al.
Journal of Applied Polymer Science, 132(1) (2015)
Electrochemical photocatalytic degradation of dye solution with a TiO2-coated stainless steel electrode prepared by electrophoretic deposition.
Lin WC, et al.
Applied Catalysis. B, Environmental, 140, 32-41 (2013)
Formation and characteristics of Cu colloids from CuO powder by laser irradiation in 2-propanol.
Yeh MS, et al.
The Journal of Physical Chemistry B, 103(33), 6851-6857 (1999)
Evaluation of Ethanol, 1-Propanol, and 2-Propanol in a Direct Oxidation Polymer-Electrolyte Fuel Cell A Real-Time Mass Spectrometry Study.
Wang J, et al.
Journal of the Electrochemical Society, 142(12), Wang J-Wang J (1995)
Thomas W Winkler et al.
PLoS genetics, 11(10), e1005378-e1005378 (2015-10-02)
Genome-wide association studies (GWAS) have identified more than 100 genetic variants contributing to BMI, a measure of body size, or waist-to-hip ratio (adjusted for BMI, WHRadjBMI), a measure of body shape. Body size and shape change as people grow older

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico