GSWP04700

Millipore

MF-Millipore® Membrane Filter, 0.22 µm pore size

47 mm diameter, mixed cellulose esters (MCE) membrane, hydrophilic, white, 100 discs

eCl@ss:
32031602
NACRES:
NB.24

Niveau de qualité

400

Matériau

mixed cellulose esters (MCE) membrane
plain filter
white filter

Stérilité

non-sterile

Caractéristique

hydrophilic

manufacturer/tradename

MF-Millipore®
Millipore

Paramètre

18 mL/min-cm2 water flow rate
2 L/min-cm2 air flow rate
75 °C max. temp.

Diam. du filtre

47 mm

Épaisseur

150 μm

gravimetric extractables

2%

Indice de réfraction

n/D 1.51

Matrice

MF-Millipore®

Dimension de pores

0.22 μm pore size
75 % porosity

Capacité

150 μg/cm2 binding capacity (protein)

bubble point

≥3.52 bar, air with water at 23 °C

Expédié(e)(s) dans

ambient

Description générale

Biologically inert mixtures of cellulose acetate and cellulose nitrate have made MF-Millipore membrane filters one of the most widely used membranes in analytical and research applications.

MF-Millipore filters without Triton surfactant contain minimum amounts of wetting agent and have a lower water extractable content than standard MF-Millipore filters.

Features & Benefits:
- Versatile filter for biological and environmental monitoring applications
- Available in a range of pore sizes, colored black or white, with or without a gridded surface
- Compatible with ethylene oxide, gamma irradiation, and autoclave sterilization methods
Filter Code: GSWP

Application

47 mm diameter, mixed cellulose esters (MCE) membrane, hydrophilic, white, 100 discs

Autres remarques

Directions for Use

  • Organism Retention: Microorganism
  • Mode of Action: Filtration (size exclusion)
  • Application: General laboratory filtration
  • Intended Use: Retention or removal of biological contaminants
  • Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 μm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 μm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
  • Storage Statement: Store in dry location away from heat source
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Informations légales

MF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany

Pictograms

Flame

Mention d'avertissement

Danger

Mentions de danger

hazcat

Aquatic Chronic 3 - Flam. Sol. 1

storage_class_code

4.1B - Flammable solid hazardous materials

WGK Allemagne

WGK 3

Certificat d'analyse

Certificat d'origine

Ranjith Eswaran et al.
Marine environmental research, 159, 104997-104997 (2020-07-15)
The influence of changing salinity on community composition and functional activity (Bacterial Production (BP) and ectoenzyme activity) of major bacterial taxa was evaluated using microcosm experiments in a tropical monsoon influenced estuary. Natural bacterial inocula at different salinities, representing marine...
Anna Alekseeva et al.
Carbohydrate polymers, 234, 115913-115913 (2020-02-20)
Rapid advances have been made in developing analytical technologies for characterization of highly heterogeneous active ingredients of complex drugs, such as pentosan polysulfate (PPS), active ingredient of the drug Elmiron®, approved by the Food and Drug Administration and marketed in...

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique