The membrane is not treated with any lubricant to prevent cracking.. A fold test is performed by sampling one roll from the membrane lot; if cracks are detected, all remaining lots in the roll are tested.
Sélectionner une taille de conditionnement
| Taille/Référence | Disponibilité | Prix |
|---|---|---|
50 pkg | Vérifier la disponibilité des articles du panier | 254,00 € |
250 pkg | Vérifier la disponibilité des articles du panier | 980,00 € |
1000 pkg | Vérifier la disponibilité des articles du panier | 2 840,00 € |
A propos de cet article
254,00 €
Quality Segment
material
PVDF membrane, polypropylene housing
sterility
non-sterile
product line
Millex™
feature
holdup volume≤ 80 μL (after air purge), hydrophilic
manufacturer/tradename
Millex™
parameter
45 °C max. temp., 8.6 bar max. inlet pressure (125 psi)
technique(s)
UHPLC: suitable, analytical sample preparation: suitable, low protein-binding filtration: suitable
H
27 mm
diam.
33 mm
filtration area
4.5 cm2
volume
100 mL
color
yellow
matrix
Durapore®
pore size
0.22 μm
input
sample type mild organic solution(s)
sample type aqueous solution(s)
bubble point
≥3.45 bar, air with water at 23 °C
fitting
female Luer-Lok® inlet, male Luer outlet slip
shipped in
ambient
General description
- Low protein binding minimizes interaction with your sample to maximize recovery
- Polypropylene housing offers low extractables and broad chemical compatibility
- Membrane type and pore size are printed on the device for easy reference
- A yellow band identifies non-sterile Millex™ filters with hydrophilic Durapore® (PVDF) membrane
- Recommended for filtering 10-100 milliliter (mL) volumes to remove particles prior to instrumentation analysis
Application
Features and Benefits
Legal Information
1 of 1
Cet article | |||
|---|---|---|---|
| description pore size 0.22 μm, diam. 33 mm, non-sterile, hydrophilic | description pore size 0.45 μm, diam. 33 mm, non-sterile, hydrophilic | description pore size 0.22 μm, diam. 13 mm, non-sterile, hydrophilic | description pore size 0.22 μm, diam. 13 mm, non-sterile, hydrophilic |
| pore size 0.22 μm | pore size 0.45 μm | pore size 0.22 μm | pore size 0.22 μm |
| manufacturer/tradename Millex™ | manufacturer/tradename Millex™ | manufacturer/tradename Millex™ | manufacturer/tradename Millex™ |
| diam. 33 mm | diam. 33 mm | diam. 13 mm | diam. 13 mm |
| material polypropylene housing, PVDF membrane | material PVDF membrane, polypropylene housing | material PVDF membrane, polypropylene housing | material PVDF membrane, polypropylene housing |
| fitting female Luer-Lok® inlet, male Luer outlet slip | fitting female Luer-Lok® inlet, male Luer outlet slip | fitting outlet tube, female Luer-Lok® inlet | fitting female Luer-Lok® inlet, male Luer outlet slip |
| sterility non-sterile | sterility non-sterile | sterility non-sterile | sterility non-sterile |
Still not finding the right product?
Explore all of our products under Filtre pour seringue Millex™ en PVDF
— ou —
Essayez notre Outil de sélection de produits pour affiner vos choix.
Faites votre choix parmi les versions les plus récentes :
Déjà en possession de ce produit ?
Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.
-
Is this filter in any lubricant to prevent the membrane from cracking?
1 réponse-
Utile ?
-

