The recommended catalog number is SLFG05010 for the Millex-FG filter, which has a pore size of 0.20 µm and is made of hydrophobic PTFE material. The filter has a diameter of 50 mm.
SLFG050
Millex™ hydrophobic PTFE vent filter
pore size 0.2 μm, diam. 50 mm, non-sterile, 1/4-1/2 in. hose barb, sterilization compatible with autoclavable
Synonym(s):
0.2 μm PTFE syringe filter, Fluoropore® PTFE syringe filter, Millex-FG vent filter, Millex-FG50, Millex™-FG Vacuum Line Protector, disposable syringe filter, syringe filter, vacuum line filter
Sign In to View Organizational & Contract Pricing.
Select a Size
10 PKG
£151.00
100 PKG
£1,150.00
£151.00
Check Cart for Availability
About This Item
UNSPSC Code:
41104922
NACRES:
NB.22
eCl@ss:
32031690
Pore size:
0.2 μm
Diam.:
50 mm
Sterility:
non-sterile
Material:
PTFE membrane, polypropylene housing
Skip To
material
PTFE membrane, polypropylene housing
sterility
non-sterile
sterilization compatibility
autoclavable compatible
product line
Millex™
feature
hydrophobic
manufacturer/tradename
Millex™
parameter
≥15 L/min air flow rate at 5 psi, 130 °C max. temp., 23 L/min air flow rate at 5 psi (typical), 4.13 bar max. inlet pressure (60 psi)
technique(s)
analytical sample preparation: suitable, gas filtration: suitable, vent filtration: suitable
diam.
50 mm
filtration area
19.6 cm2
housing diam.
62 mm
inlet to outlet H
71 mm
impurities
≤20 EU/device bacterial endotoxins (LAL test, Aqueous extraction)
matrix
Fluoropore®
pore size
0.2 μm
input
gas
sample type organic solution(s)
bubble point
≥17 psig, 60/40% IPA/water
fitting
inlet stepped hose barb (with Female Luer slip interior), outlet stepped hose barb (with Female Luer slip interior)
shipped in
ambient
Quality Level
Looking for similar products? Visit Product Comparison Guide
1 of 4
This Item | |||
|---|---|---|---|
| manufacturer/tradename Millex™ | manufacturer/tradename Millex™ | manufacturer/tradename Millex™ | manufacturer/tradename Millex™ |
| diam. 50 mm | diam. 50 mm | diam. 50 mm | diam. 50 mm |
| pore size 0.2 μm | pore size 0.2 μm | pore size 0.2 μm | pore size 0.2 μm |
| material PTFE membrane, polypropylene housing | material PTFE membrane, polypropylene housing | material PTFE membrane, polypropylene housing | material PTFE membrane, polypropylene housing |
| fitting inlet stepped hose barb (with Female Luer slip interior), outlet stepped hose barb (with Female Luer slip interior) | fitting inlet/outlet hose barb (1/2 in.-1/4 in., with Female Luer slip interior) | fitting inlet stepped hose barb (with Female Luer slip interior), 1/8 in. male NPT outlet connection, 1/8 in. male NPT outlet fitting | fitting inlet stepped hose barb (1/2-1/4 in. silicone with Female Luer slip interior), 1/8 in. male NPT outlet |
| sterility non-sterile | sterility non-sterile | sterility non-sterile | sterility non-sterile |
General description
Millex™ syringe filter units with hydrophobic Fluoropore® membrane are ideal for in-line sterilization of gases and venting sterile containers, and filters with Fluoropore® membrane can also be used for sterilizing or clarifying organic solutions. The 50 mm Millex filter units are especially useful for vacuum line protection. All units are bi-directional.
Application
- Sterilizing Gases
- Vacuum Line Protection
- Venting Sterile Containers
- Sterilizing and Clarifying Organic Solutions
Features and Benefits
- Ideal for vacuum line protection
- Autoclavable up to 10 times
- Bi-directional in flow
- Broad chemical compatibility
Legal Information
Fluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a trademark of Merck KGaA, Darmstadt, Germany
Not finding the right product?
Try our Product Selector Tool.
related product
Product No.
Description
Pricing
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Related Content
Learn how to effectively filter fetal bovine serum (FBS) using Stericup® Quick Release vacuum filtration devices, including flow test data and analysis.
Millex wallchart
-
What would be your recommendation to protect my instrumentation from water intrusion?
1 answer-
Helpful?
-
-
Is there a sterile version of this filter available? Andrea
1 answer-
A sterile version of Product SLFG050 is not available.
Helpful?
-
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service