Search Within
Document Type
acid gel tab
Applied Filters:
Keyword:'acid gel tab'
Showing 1-30 of 59 results for "acid gel tab" within Technical Documents
User Guide - HPPCRCURO
Identify bands by staining gel with ethidium bromide or SYBR Green I
Nucleic Acid Gel Stain*.
Wear gloves; ethidium bromide is a potent carcinogen.
� Cut desired DNA band from gel using a scalpel or razor
User Guide 73065BC 73021BC - Assurance® GDS Rotor - EN
interface has a tab-style system to accommodate
the expansion of multiple instruments linked to a single laptop (up to 6 tabs). One tab is designated the “setup
mode” tab and up to 5 instrument tabs can be added
User Guide 73070BC - Assurance GDS RGQ - EN
interface has a tab-style system to accommodate
the expansion of multiple instruments linked to a single laptop (up to 6 tabs). One tab is designated the “setup
mode” tab and up to 5 instrument tabs can be added
User Guide - MGT and MWTS
alignment tabs that correctly orient
the lid .
Buffer dam
Used when running an odd number of gels .
(not shown)
Gel Releasers
Used to separate the glass plates when hand cast
gels are used and
Product Information Sheet - SAE0194
top and bottom tabs and rinse
the column twice with TBS. Allow the buffer
to drain from the column and leave residual
TBS in the column to aid in packing the
ANTI-FLAG M2 affinity gel.
User Guide - Auto2D®
higher voltage (8 kV) than other recipes, so the gel thickness may become thinner on
the basic end . Additionally, DTT migrates to the acidic end of the gel . This can cause
the basic end to dry and the
MultiScreen Separations System User Guide
plate
alignment tabs, follow these steps:
1. Remove the two alignment tabs from the shipping bag.
2. Position the tabs with the shorter sides pointing up.
3. Insert the tabs in the manifold base
Data Sheet - F4799
top and bottom tabs and rinse the
column twice with TBS. Allow the buffer to drain
from the column. Leave residual TBS in the
column to aid in packing the ANTI-FLAG® M2
affinity gel.
F4799dat
User Guide Immobilon® GO for Simple Immunodetection
Reversible Protein Detection Kit for
Membranes and Polyacrylamide Gels
1 kit RPOB-1KT
Ponceau S solution, 0.1% (w/v) in 5%
acetic acid
1 L P7170
Secondary Antibodies
Description Qty/Pk Catalogue
TB327 RoboPop His Mag and GST Mag Purification Kits
positioning tabs at both ends. After the Sealer is fully
secured on the culture plate, you can remove positioning tabs or layers on the tabs. Do not
remove positioning tabs or layers from the tabs until the
AbSurance¿Pro Histone Peptide Microarray
Microarray (Part #CS210586). Store at 4°C in the dark.
2. Adhesive gasket and sheet of 20 adhesive sealing tabs (Part #CR208893 and CR208894).
Store at room temperature.
Materials Required But Not Supplied
AbSurance™ Pro Histone Peptide Microarray
Microarray (Part #CS210586). Store at 4°C in the dark.
2. Adhesive gasket and sheet of 20 adhesive sealing tabs (Part #CR208893 and CR208894).
Store at room temperature.
Materials Required But Not Supplied
User Guide -GCR2 and MGCK
REV 07/22 4 of 8
Assembly
1. Inspect the gel sealing gasket for defects. Place
defect-free gasket between the alignment tabs
on the bottom of the gel caster base.
2. Place the short plate on
Data Sheet - A4596
protocols for elution of FLAG-tagged proteins from
this ANTI-FLAG® M1 Affinity Gel.
1. Elution of FLAG® Fusion Proteins by Acid Elution
with Glycine:
• Elute the bound FLAG® fusion protein from
User Guide 71037 - EHEC ID E.coli 0157H7 Tq - AFNOR - EN
A. Preparation of Gel Cooling Blocks
1. Prior to initial use, the gel cooling block must be stored in the freezer (-20 ± 5 °C) for minimum 6 h.
When frozen the gel cooling block will change
User Guide 71037BC
reagents.
A. Preparation of Gel Cooling Blocks
1. Prior to initial use, the gel cooling block must be stored in the freezer (-20 ± 5 °C) for minimum 6 h.
When frozen the gel cooling block will change
Data Sheet - A1970
column to control the
flow rate. Limit the length of tubing to 25 cm.
3. Remove the top and bottom tabs and rinse the
column twice with PBS pH 7.4. Allow the buffer to
drain from
Product Information Sheet - 11089153001
screening), Table 1
Immunoblotting, Table 2
Immunohistochemistry or immunocytochemistry, Table 3
Tab. 1: Procedure for ELISA
Procedure/
Incubation
Reagent Volume
�l
Reagent
concen-
tration
�g
Product Information Sheet - 11112481001
screening), Table 1
Immunoblotting, Table 2
Immunohistochemistry or immunocytochemistry, Table 3
Tab. 1: Procedure for ELISA
Procedure/
Incubation
Reagent Volume
�l
Reagent
concen-
tration
�g
Datasheet - A2095
to
control the flow rate. Limit the length of tubing to
25 cm.
3. Remove the top and bottom tabs. Rinse the
column with PBS, pH 7.4. Allow the buffer to drain
from the column. Leave residual
HYBRIDIZATION
HYBRIDIZATION
Product Code Product Description Quantity
H 1909 Assortment pack 1 Each
contains seal tabs, 5 ea A-D & 10 Each E
H 1784 Adhesive module A, 0.6 mm depth 25 Each
H 2159 Imaging module B
Immobilon®-NC Transfer Membrane For Standard Immunodetection
pH 11, including 10% alcohol or a lower pH buffer such
as an acetic acid buffer
Poor detection when urea is used
in the gel and/or transfer buffer Reduce the temperature by using a circulating buffer
Immobilon®-NC Transfer Membrane For Standard Immunodetection
pH 11, including 10% alcohol or a lower pH buffer such
as an acetic acid buffer
Poor detection when urea is used
in the gel and/or transfer buffer Reduce the temperature by using a circulating buffer
User Guide - HATF85R, HATF07850, HATF08130
pH 11, including 10% alcohol or a lower pH buffer such
as an acetic acid buffer
Poor detection when urea is used
in the gel and/or transfer buffer Reduce the temperature by using a circulating buffer
Product Information Sheet - FLC
the top and bottom tab and rinse the column twice with TBS. Allow buffer to
drain from the column and leave residual TBS in the column to aid in packing the
ANTI-FLAG M1 Affinity Gel in the next
Product Information Sheet - FLA
the top and bottom tab and rinse the column twice with TBS. Allow buffer to
drain from the column and leave residual TBS in the column to aid in packing the
ANTI-FLAG M1 Affinity Gel in the next
Product Information Sheet - FLS
the top and bottom tab and rinse the column twice with TBS. Allow buffer to
drain from the column and leave residual TBS in the column to aid in packing the
ANTI-FLAG M1 Affinity Gel in the next
User Guide - 152610
4.12.1 ‘Export Original Cropped Images’ (all tabs) ...................................................48
4.12.2 ‘Export Images as Displayed’ (all tabs) ..............................................
Bioreagents for DNA/RNA Electrophoresis
Electrophoresis System
The Gel XL-100� mini-gel electrophoresis system is designed for low voltage
separation of nucleic acids and proteins in both agarose and polyacrylamide gel
matrices. All components
User Guide
right).
Assembly
1. Inspect the gel sealing gasket for
defects. Place gasket between the
alignment tabs on the bottom of the
gel caster base.
2. Clean glass spacer plate and
masked short plate
Page 1 of 2