Sigma-Aldrich

聚乙烯醇 average Mw 130,000, 99+% hydrolyzed; CAS Number: 9002-89-5; Linear Formula: [-CH2CHOH-]n; find Sigma-Aldrich-563900 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich

聚乙烯醇 average Mw 130,000, 99+% hydrolyzed | Sigma-Aldrich

average M<SUB>w</SUB> 130,000, 99+% hydrolyzed

聚乙烯醇 average Mw 130,000, 99+% hydrolyzed

聚乙烯醇

Effect of functionalized silica particles on cross-linked poly (vinyl alcohol) proton conducting membranes

CO2 separation using thermally stable crosslinked poly (vinyl alcohol) membrane blended with polyvinylpyrrolidone/polyethyleneimine/tetraethylenepentamine

Cross-linked poly (vinyl alcohol)/sulfonated nanoporous silica hybrid membranes for proton exchange membrane fuel cell

Relationship between micro-porosity, water permeability and mechanical behavior in scaffolds for cartilage engineering

Compostable Polymer Properties and Packaging Applications

Although conversion of low value but high-volume lignin by-product to its usable form is one of the determinant factors for building an economically feasible integrated lignocellulose biorefinery, it has been challenged by its structural complexity and inhomogeneity. We and others have shown that uniform lignin nanoparticles can be produced from a wide range of technical lignins, despite the varied lignocellulosic biomass and the pretreatment methods/conditions applied. This value-added nanostructure lignin enriched with multifunctional groups can be a promising versatile material platform for various downstream utilizations especially in the emerging nanocomposite fields. Inspired by the story of successful production and application of nanocellulose biopolymer, two types of uniform lignin nanoparticles (LNPs) were prepared through self-assembling of deep eutectic solvent (DES) and ethanol-organosolv extracted technical lignins derived from a two-stage fractionation pretreatment approach, respectively. Both LPNs exhibited sphere morphology with unique core-shell nanostructure, where the DES-LNPs showed a more uniform particle size distribution. When incorporated into the traditional polymeric matrix such as poly(vinyl alcohol), these LPN products displayed great potential to formulate a transparent nanocomposite film with additional UV-shielding efficacy (reached ~80% at 400 nm with 4 wt% of LNPs) and antioxidant functionalities (reached ~160 μm mol Trolox g-1 with 4 wt% of LNPs). At the same time, the abundant phenolic hydroxyl groups on the shell of LNPs also provided good interfacial adhesion with PVA matrix through the formation of hydrogen bonding network, which further improved the mechanical and thermal performances of the fabricated LNPs/PVA nanocomposite films. Both LNPs are excellent candidates for producing multifunctional polymer nanocomposites using facile technical route. The prepared transparent and flexible LNPs/PVA composite films with high UV-shielding efficacy, antioxidant activity, and biocompatibility are promising in the advanced packaging field, which potentially provides an additional high-value lignin product stream to the lignocellulose biorefinery. This study could open the door for the production and application of novel LNPs in the nascent bioeconomy.Graphical abstractLignin nanoparticle for transparent nanocomposite film with UV-shielding efficacy.

Lignin valorization: lignin nanoparticles as high-value bio-additive for multifunctional nanocomposites.

Biodegradation of poly (vinyl alcohol) based materials

PVA bio-nanocomposites reinforced with cellulose nanocrystals (CNC) extracted from commercial microcrystalline cellulose (MCC) and from two types of natural fibres, Phormium tenax and Flax of the Belinka variety, were produced by solvent casting in water. Morphological, thermal, mechanical and transparency properties were studied while the respective efficiency of the extraction process of CNC from the three sources was evaluated. The effect of CNC types and content on PVA properties and water absorption capacity were also evaluated. Natural fibres offered higher levels of extraction efficiency when compared with MCC hydrolysis yield. Thermal analysis proved that CNC promotes the crystallization of the PVA matrix, while improving its plastic response. It was also clarified that all PVA/CNC systems remain transparent due to CNC dispersion at the nanoscale, while being all saturated after the first 18-24h of water absorption.

Binary PVA bio-nanocomposites containing cellulose nanocrystals extracted from different natural sources: part I.

Cellulose nanocrystals (CNC) extracted from three different sources, namely flax, phormium, and commercial microcrystalline cellulose (MCC) have been used in a polyvinyl alcohol (PVA) matrix to produce anti-bacterial films using two different amounts of silver nanoparticles (0.1 wt% and 0.5 wt%). In general, CNC confer an effect of reinforcement to PVA film, the best values of stiffness being offered by composites produced using phormium fibres, whilst for strength those produced using flax are slightly superior. This was obtained without inducing any particular modification in transition temperatures and in the thermal degradation patterns. As regards antibacterial properties, systems with CNC from flax proved slightly better than those with CNC from phormium and substantially better than those including commercial MCC. Dynamic mechanical thermal analysis (DMTA) has only been performed on the ternary composite containing 0.1 wt% Ag, which yielded higher values of Young's modulus, and as a whole confirmed the above results.

Ternary PVA nanocomposites containing cellulose nanocrystals from different sources and silver particles: part II.

In vitro cytotoxicity and inflammatory response following exposure to nanoparticles (NPs) made of poly(lactide-co-glycolide) (PLGA) have been investigated on A549 human lung epithelial cells. Three different PLGA NPs (230 nm) were obtained using different stabilizers (polyvinyl alcohol, chitosan, or Pluronic(®) F68) to form respectively neutral, positively or negatively charged NPs. Polystyrene NPs were used as polymeric but non-biodegradable NPs, and titanium dioxide (anatase and rutile) as inorganic NPs, for comparison. Cytotoxicity was evaluated through mitochondrial activity as well as membrane integrity (lactate dehydrogenase release, trypan blue exclusion, propidium iodide staining). The cytotoxicity of PLGA-based and polystyrene NPs was lower or equivalent to the one observed after exposure to titanium dioxide NPs. The inflammatory response, evaluated through the release of the IL-6, IL-8, MCP-1, TNF-α cytokines, was low for all NPs. However, some differences were observed, especially for negative PLGA NPs that led to a higher inflammatory response, which can be correlated to a higher uptake of these NPs. Taken together, these results show that both coating of PLGA NPs and the nature of the core play a key role in cell response.

Toxicity of surface-modified PLGA nanoparticles toward lung alveolar epithelial cells.

In this work, a new macroporous molecularly imprinted cryogel (MIP composite cryogel) was synthesized by glutaraldehyde cross-linking reaction of poly(vinyl alcohol) (PVA) particles and amino-modified molecularly imprinted core-shell nanoparticles. The MIP core-shell nanoparticles were prepared using propranolol as a template by one-pot precipitation polymerization with sequential monomer addition. The characteristics of the MIP composite cryogel were studied by scanning electron microscopy (SEM) and texture analyzer. The macroporous structure of the composite (with the pore size varying from a few micrometers to 100 μm) enabled high mass transfer of particulate-containing fluids. In a solid phase extraction (SPE) process, the efficiency and selectivity of the MIP composite cryogel were investigated, where the cryogel was used as an affinity matrix to remove propranolol from aqueous solution as well as from complex plasma sample without prior protein precipitation. The MIP composite cryogel maintained high selectivity and stability and could be used repeatedly after regeneration.

Cryogelation of molecularly imprinted nanoparticles: a macroporous structure as affinity chromatography column for removal of β-blockers from complex samples.

Development of tissue engineering solutions for biomedical applications has driven the need for integration of biological signals into synthetic materials. Approaches to achieve this typically require chemical modification of the biological molecules. Examples include chemical grafting of synthetic polymers onto protein backbones and covalent modification of proteins using crosslinkable functional groups. However, such chemical modification processes can cause protein degradation, denaturation or loss of biological activity due to side chain disruption. This study exploited the observation that native tyrosine rich proteins could be crosslinked via radical initiated bi-phenol bond formation without any chemical modification of the protein. A new, tyramine functionalised poly(vinyl alcohol) (PVA) polymer was synthesised and characterised. The tyramine modified PVA (PVA-Tyr) was fabricated into hydrogels using a visible light initiated crosslinking system. Mass loss studies showed that PVA-Tyr hydrogels were completely degraded within 19 days most likely via degradation of ester linkages in the network. Protein incorporation to form a biosynthetic hydrogel was achieved using unmodified gelatin, a protein derived from collagen and results showed that 75% of gelatin was retained in the gel post-polymerisation. Incorporation of gelatin did not alter the sol fraction, swelling ratio and degradation profile of the hydrogels, but did significantly improve the cellular interactions. Moreover, incorporation of as little as 0.01 wt% gelatin was sufficient to facilitate fibroblast adhesion onto PVA-Tyr/gelatin hydrogels. Overall, this study details the synthesis of a new functionalised PVA macromer and demonstrates that tyrosine containing proteins can be covalently incorporated into synthetic hydrogels using this innovative PVA-Tyr system. The resultant degradable biosynthetic hydrogels hold great promise as matrices for tissue engineering applications.

Covalent incorporation of non-chemically modified gelatin into degradable PVA-tyramine hydrogels.

A carbon nanotube (CNT) integrated polymer composite membrane with a polyvinyl alcohol barrier layer has been prepared to separate oil from water for treatment of oil-containing waste water. The CNTs were synthesised using chemical vapour deposition, and a phase inversion method was employed for the blending of the CNTs in the polymer composite solution for casting of the membrane. Relative to the baseline polymer, an increase of 119% in the tensile strength, 77% in the Young's modulus and 258% in the toughness is seen for a concentration of 7.5% CNTs in the polymer composite. The permeate through the membrane shows oil concentrations below the acceptable 10 mg/L limit with an excellent throughput and oil rejection of over 95%.

A carbon nanotube-infused polysulfone membrane with polyvinyl alcohol layer for treating oil-containing waste water.

Porous surface patterns are used in a wide variety of practical applications. Honeycomb-patterned porous polymer films are good templates for preparing porous surfaces due to their simple fabrication and the arrangement of pores on the surface. Catechol groups include in adhesive protein of mussels have attracted much attention due to their highly and substrate-independent adhesive properties. In this paper, highly and substrate-independent adhesive honeycomb-patterned porous polymer films are prepared by using amphiphilic copolymer having catechol moieties. Furthermore, porous surface patterns are transferred on various organic or inorganic substrates by wet etching with using adhesive honeycomb films as templates.

Fabrication of mussel-inspired highly adhesive honeycomb films containing catechol groups and their applications for substrate-independent porous templates.

Mixed noblility: We show that the modification of a gold/carbon catalyst with platinum or palladium produces stable and recyclable catalysts for the selective oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA): the support and nanoparticle chemistry directly mediate the selective oxidation of terminal hydroxyl groups in bio-derived HMF. This finding is a significant advance over current conversion technology because of the technological importance of FDCA.

Pd-modified Au on carbon as an effective and durable catalyst for the direct oxidation of HMF to 2,5-furandicarboxylic acid.

Mucus typically traps and rapidly removes foreign particles from the airways, gastrointestinal tract, nasopharynx, female reproductive tract and the surface of the eye. Nanoparticles capable of rapid penetration through mucus can potentially avoid rapid clearance, and open significant opportunities for controlled drug delivery at mucosal surfaces. Here, we report an industrially scalable emulsification method to produce biodegradable mucus-penetrating particles (MPP). The emulsification of diblock copolymers of poly(lactic-co-glycolic acid) and polyethylene glycol (PLGA-PEG) using low molecular weight (MW) emulsifiers forms dense brush PEG coatings on nanoparticles that allow rapid nanoparticle penetration through fresh undiluted human mucus. In comparison, conventional high MW emulsifiers, such as polyvinyl alcohol (PVA), interrupts the PEG coating on nanoparticles, resulting in their immobilization in mucus owing to adhesive interactions with mucus mesh elements. PLGA-PEG nanoparticles with a wide range of PEG MW (1, 2, 5, and 10 kDa), prepared by the emulsification method using low MW emulsifiers, all rapidly penetrated mucus. A range of drugs, from hydrophobic small molecules to hydrophilic large biologics, can be efficiently loaded into biodegradable MPP using the method described. This readily scalable method should facilitate the production of MPP products for mucosal drug delivery, as well as potentially longer-circulating particles following intravenous administration.

Scalable method to produce biodegradable nanoparticles that rapidly penetrate human mucus.

Novel poly(vinyl alcohol)/citric acid/chitosan (PVA/CA/CHT, PCC) beads were prepared as an adsorbent for the removal of trivalent chromium (Cr(3+)) in aqueous solutions. PCC beads with different mass ratios (I, II, III, IV, V, ad VI) between PVA/CA/CHT were evaluated for the removal of Cr(3+) ions to find an optimal stoichiometry of PCC beads, which indicated that the PCC bead (II) with the PVA/CA/CHT mass ratio of 1/5/1 showed the highest adsorption for Cr(3+) ions. The surface characteristics of PCC beads (II) were determined by scanning electron microscopy using a field emission scanning electron microscope (FESEM) and Fourier transform infrared spectroscopy (FTIR). The results obtained in this study implied that PCC bead (II) had an obviously rough and folded structure, and its spectrum manifested significant changes compared to those of PVA, CA and CHT. The sorption experiments were conducted to evaluate the performance of PCC beads (II) to adsorb Cr(3+) ions in aqueous solutions. Results indicated that the Cr(3+) ion sorption onto PCC beads (II) was highly pH-dependent with the maximum uptake at pH 6.0. The sorption kinetics data were well fitted by the pseudo-second-order equation with high regression coefficients. Sorption isotherm of PCC beads (II) was well described by Langmuir equation, with a maximum sorption at 41.5mg Cr/g PCC beads (II). Desorption studies were also carried out by the repeated sorption/desorption experiments. The high efficiency and reusability of PCC beads (II) make them an attractive sorbent for the removal of Cr(3+) and possibly other metals in aqueous solutions.

Evaluation of a novel chitosan polymer-based adsorbent for the removal of chromium (III) in aqueous solutions.

C6-carboxy-cellulose with a carboxylate content of 0.8 mmol g(-1) was obtained by oxidation of once-dried cellulose, using the 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO)/NaClO/NaClO2 system at pH 6.8 and 60 °C for 16 h. This method, with the addition of reagents in the order TEMPO, NaClO and NaClO2, was 38 h faster than a previously published method. Individualized cellulose nanofibrils with a width of 3-5 nm and a length of several hundred nanometers were prepared by homogenizing the C6-carboxy-cellulose-water suspension. Macroporous cellulose nanofibril/poly(vinyl alcohol) scaffolds with interconnected large pores of 20-100 μm diameter and small pores of 2-10 μm diameter were fabricated. The cellulose nanofilaments formed nanofibrous structures on the surface of the PVA wall, which was similar to that of the collagen skeleton of the extracellular matrix. NIH/3T3 cells were cultured in the scaffolds for 4 weeks, SEM observation showed that the cells were anchored and clustered on the cellulose nanofilaments, forming spherical colonies. The extracellular matrix (ECM) was filled with mineralized particles.

Fast and continuous preparation of high polymerization degree cellulose nanofibrils and their three-dimensional macroporous scaffold fabrication.

The purpose of this study is to investigate the use of multivariate data analysis for powder X-ray diffraction-pair-wise distribution function (PXRD-PDF) data to detect phase separation in freeze-dried binary amorphous systems. Polymer-polymer and polymer-sugar binary systems at various ratios were freeze-dried. All samples were analyzed by PXRD, transformed to PDF and analyzed by principal component analysis (PCA). These results were validated by differential scanning calorimetry (DSC) through characterization of glass transition of the maximally freeze-concentrate solute (Tg'). Analysis of PXRD-PDF data using PCA provides a more clear 'miscible' or 'phase separated' interpretation through the distribution pattern of samples on a score plot presentation compared to residual plot method. In a phase separated system, samples were found to be evenly distributed around the theoretical PDF profile. For systems that were miscible, a clear deviation of samples away from the theoretical PDF profile was observed. Moreover, PCA analysis allows simultaneous analysis of replicate samples. Comparatively, the phase behavior analysis from PXRD-PDF-PCA method was in agreement with the DSC results. Overall, the combined PXRD-PDF-PCA approach improves the clarity of the PXRD-PDF results and can be used as an alternative explorative data analytical tool in detecting phase separation in freeze-dried binary amorphous systems.

聚乙烯醇

average M_w 130,000, 99+% hydrolyzed

属性

形式

分子量

落球

InChI

InChI key

说明

一般描述

应用

包装

安全信息

储存分类代码

WGK

闪点(F)

闪点(C)

个人防护装备

文件

分析证书

原产地证书 (CofO)

更多文件

Quotes and Ordering

同行评审论文

技术服务

支持

订单

公司

社交媒体

Merck