- 117354
1.17354
MAS-100 Atmos® Pressure Tube
for use with MAS-100 Atmos® Microbial Compressed Gas Sampler, tube L 2 m
Recommended Products
物料
PTFE tube
reg. compliance
FDA
描述
Compressed gas sampling
特点
autoclavable
manufacturer/tradename
MAS-100 Atmos®
管长度
2 m
application(s)
air monitoring
cosmetics
food and beverages
pharmaceutical
相容性
for use with MAS-100 Atmos® Microbial Compressed Gas Sampler
Related Categories
Compare Similar Items
View Full Comparison1 of 4
This Item | 1.17349 | 1.17348 | 1.17336 |
|---|---|---|---|
| material PTFE tube | material PVC tubing, stainless steel adapter | material stainless steel adapter ( | material aluminum cover |
| application(s) air monitoring | application(s) air monitoring | application(s) air monitoring | application(s) air monitoring |
| compatibility for use with MAS-100 Atmos® Microbial Compressed Gas Sampler | compatibility for use with MAS-100 Atmos® Microbial Compressed Gas Sampler | compatibility for use with MAS-100 Atmos® Microbial Compressed Gas Sampler | compatibility for use with MAS-100 Atmos® Microbial Compressed Gas Sampler |
| reg. compliance FDA | reg. compliance - | reg. compliance - | reg. compliance - |
| description Compressed gas sampling | description - | description - | description Compressed gas sampling |
| feature autoclavable | feature autoclavable, pre-assembled | feature autoclavable | feature - |
一般描述
The PTFE tube is 2m long and supplied with one 34mm tri-clamp adapter and silicone gasket on one end, fitting to the sampling head. The other end is connected using a universal 3/8′′ threaded female connector to enable gas supply.
One set of MAS-100 Atmos® Pressure Tube is included in the scope of delivery. The same set can be ordered as a separate accessory, if needed for back up e.g. while autoclaving.
应用
组分
1 x Tri clamp (34mm diameter)
1 x Silicone gasket (34/10mm)
1 x 3/8′′ BSP female connector
其他说明
- Connect the end of the pressure connection tubing with the universal 3/8-inch connector (female) to the closed gas supply at the sampling location. The gas supply must be equipped with a male 3/8-inch connector to fit to the pressure connection tubing of MAS-100 Atmos®. Ensure the connection is secured and there is no possibility of a leak
- Place the silicone gasket on top of the closed sampling head and fix the pressure connection tubing with the 34mm tri-clamp to the sampling head.
法律信息
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.
Difficulty Finding Your Product Or Lot/Batch Number?
How to Find the Product Number
Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).
Example:
Additional examples:
705578-5MG-PW
PL860-CGA/SHF-1EA
MMYOMAG-74K-13
1000309185
(enter as 1.000309185)
Having trouble? Feel free to contact Technical Service for assistance.
How to Find a Lot/Batch Number for COA
Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.
Aldrich Products
For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').
For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').
For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.
Not Finding What You Are Looking For?
In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service