KGW3A02TT3

Opticap^® XL2 Polysep^™ II

inlet connection diam. 1-1/2 in., pore size 1.0/0.2 μm, cartridge nominal length 2 in. (5 cm)

• Synonym(s): Opticap XL2 Polysep II 1.0/0.2 μm 1-1/2 in. TC/TC
• eCl@ss: 32031610
• NACRES: NB.24

Properties

• 物料: borosilicate glass fiber (BGF) membrane; mixed cellulose esters (MCE) membrane; polypropylene ; polypropylene housing; polypropylene support; polypropylene vent cap; silicone seal
• 质量水平: 400
• reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• 无菌性: non-sterile
• 产品线: Opticap^® XL
• 特点: hydrophilic
• manufacturer/tradename: Opticap^®
• 参数: 1.0 bar max. inlet pressure (15 psi) at 80 °C; 2.75 bar max. inlet pressure (40 psi) at 60 °C; 25 °C max. inlet temp.; 3.5 bar max. differential pressure (50 psid) at 25 °C; 5.5 bar max. inlet pressure (80 psi) at 23 °C; 80 psig max. inlet pressure
• technique(s): prefiltration: suitable
• 长度: 14.2 cm (5.6 in.)
• 宽度: 3.3 in.
• cartridge nominal length: 2 in. (5 cm)
• 直径: 14.5 cm (5.7 in.)
• 过滤面积: 0.06 m²
• inlet connection diam.: 1-1/2 in.
• inlet to outlet W: 14.2 cm (5.6 in.)
• outlet connection diam.: 1-1/2 in.
• 杂质: ≤0.5 EU/mL (LAL test, Aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• gravimetric extractables: ≤45 mg/capsule
• 基质: Polysep^™ II
• pore size: 1.0/0.2 μm nominal pore size; 1.0/0.2 μm pore size
• input: sample type liquid
• 配件: inlet sanitary flange; outlet sanitary flange; (38 mm (1 1/2 in.) Sanitary Flange Inlet and Outlet)
• 运输: ambient

Description

一般描述

Device Configuration: 取样皿滤膜

特点和优势

Format: Double Layer

联系

Replaces: SN1M040A8

分析说明

Gravimetric Extractables: after a 600 mL flush and 24 hours in water at controlled room temperature

其他说明

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to the first page of Visual Inspection Guide and introduction section of the Mixed cellulose esters Tech Brief
• Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

法律信息

OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany

Polysep is a trademark of Merck KGaA, Darmstadt, Germany

Safety Information

• 储存分类代码: 4.1B - Flammable solid hazardous materials
• WGK: WGK 2