Sigma-Aldrich

正丁醇 99.9%; CAS Number: 71-36-3; EC Number: 200-751-6; Synonyms: 正丁醇,丁醇; Linear Formula: CH3(CH2)3OH; find Sigma-Aldrich-537993 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich

1-丁醇，99.9 CH3(CH2)3OH

正丁醇

Flow reactor synthesis of cetane-enhancing fuel additive from 1-butanol.

Optimization of acid catalyzed transesterification of jatropha and rapeseed oil with 1-butanol.

Lipase catalyzed esterification of lactic acid.

Heat Capacity of 1-Butanol over a Wide Temperature Range.

Salting-out of acetone, 1-butanol, and ethanol from dilute aqueous solutions.

In the present work, we study the H atom abstraction reactions by hydroxyl radical at all five sites of 1-butanol. Multistructural variational transition state theory (MS-VTST) was employed to estimate the five thermal rate constants. MS-VTST utilizes a multifaceted dividing surface that accounts for the multiple conformational structures of the transition state, and we also include all the structures of the reactant molecule. The vibrational frequencies and minimum energy paths (MEPs) were computed using the M08-HX/MG3S electronic structure method. The required potential energy surfaces were obtained implicitly by direct dynamics employing interpolated variational transition state theory with mapping (IVTST-M) using a variational reaction path algorithm. The M08-HX/MG3S electronic model chemistry was then used to calculate multistructural torsional anharmonicity factors to complete the MS-VTST rate constant calculations. The results indicate that torsional anharmonicity is very important at higher temperatures, and neglecting it would lead to errors of 26 and 32 at 1000 and 1500 K, respectively. Our results for the sums of the site-specific rate constants agree very well with the experimental values of Hanson and co-workers at 896-1269 K and with the experimental results of Campbell et al. at 292 K, but slightly less well with the experiments of Wallington et al., Nelson et al., and Yujing and Mellouki at 253-372 K; nevertheless, the calculated rates are within a factor of 1.61 of all experimental values at all temperatures. This gives us confidence in the site-specific values, which are currently inaccessible to experiment.

Kinetics of the hydrogen atom abstraction reactions from 1-butanol by hydroxyl radical: theory matches experiment and more.

Layer-structured two-dimensional nanomaterials are a family of materials with strong covalent bonding within layers and weak van der Waals interaction between layers, whose vertical thickness can be thinned down to few nanometer and even single atomic layer. Bismuth chalcogenides are examples of such two-dimensional materials. Here, we present our discovery of significant enhancement of light transmission through thin nanoplates of layered bismuth chalcogenides by intercalation of copper atoms, which is on the contrary to most bulk materials in which doping reduces the light transmission. This surprising behaviour results from two mechanisms: chemical tuning effect of substantial reduction of material absorption after intercalation and nanophotonic effect of zero-wave anti-reflection unique to ultra-small thickness of nanoplates. We demonstrate that the synergy of these two effects in two-dimensional nanostructures can be exploited for various optoelectronic applications including transparent electrode. The intercalation mechanism allows potential dynamic tuning capability.

Optical transmission enhancement through chemically tuned two-dimensional bismuth chalcogenide nanoplates.

Hydrophobic hydration is considered to have a key role in biological processes ranging from membrane formation to protein folding and ligand binding. Historically, hydrophobic hydration shells were thought to resemble solid clathrate hydrates, with solutes surrounded by polyhedral cages composed of tetrahedrally hydrogen-bonded water molecules. But more recent experimental and theoretical studies have challenged this view and emphasized the importance of the length scales involved. Here we report combined polarized, isotopic and temperature-dependent Raman scattering measurements with multivariate curve resolution (Raman-MCR) that explore hydrophobic hydration by mapping the vibrational spectroscopic features arising from the hydrophobic hydration shells of linear alcohols ranging from methanol to heptanol. Our data, covering the entire 0-100 °C temperature range, show clear evidence that at low temperatures the hydration shells have a hydrophobically enhanced water structure with greater tetrahedral order and fewer weak hydrogen bonds than the surrounding bulk water. This structure disappears with increasing temperature and is then, for hydrophobic chains longer than ~1 nm, replaced by a more disordered structure with weaker hydrogen bonds than bulk water. These observations support our current understanding of hydrophobic hydration, including the thermally induced water structural transformation that is suggestive of the hydrophobic crossover predicted to occur at lengths of ~1 nm (refs 5, 9, 10, 14).

Water structural transformation at molecular hydrophobic interfaces.

The butanol extraction method of Morton (1950), a routine step in enzyme purification, is discussed with special reference to a hydrophobic form of alkaline phosphatase from human liver tissue. This form slowly precipitates from butanol-extracted liver tissue homogenates stored at 4 degrees C. Furthermore, it is lost when acetone precipitation is applied as a purification procedure. The soluble form in liver tissue is shown to have a higher relative hydrophobicity than the serum liver/bone isoenzyme. The use of sodium cholate in the isolation of the hydrophobic form produces an artefact in isoelectric focusing, which can be abolished by dialysis prior to focusing.

Hydrophobic properties of alkaline phosphatases.

Neutrophils were isolated in good yield from fresh whole blood and their alkaline phosphatase was solubilized. Inhibitor studies using L-phenylalanylglycylglycine, L-phenylalanine and L-homoarginine revealed a distinct pattern of inhibition for each of the crude or purified preparations of the human isoenzymes of alkaline phosphatase from liver, intestine or placenta. Aqueous solutions from butanol extracts of human neutrophils and a purified preparation of the enzyme from neutrophils displayed a pattern virtually identical to that of the liver alkaline phosphatase. This is consistent with the proposal that it is the product of the same structural gene which codes for the liver/kidney/bone group of human alkaline phosphatases.

Evidence that alkaline phosphatase from human neutrophils is the same gene product as the liver/kidney/bone isoenzyme.

Nearly one hundred years ago, the fermentative production of acetone by Clostridium acetobutylicum provided a crucial alternative source of this solvent for manufacture of the explosive cordite. Today there is a resurgence of interest in solventogenic Clostridium species to produce n-butanol and ethanol for use as renewable alternative transportation fuels. Acetone, a product of acetone-n-butanol-ethanol (ABE) fermentation, harbours a nucleophilic α-carbon, which is amenable to C-C bond formation with the electrophilic alcohols produced in ABE fermentation. This functionality can be used to form higher-molecular-mass hydrocarbons similar to those found in current jet and diesel fuels. Here we describe the integration of biological and chemocatalytic routes to convert ABE fermentation products efficiently into ketones by a palladium-catalysed alkylation. Tuning of the reaction conditions permits the production of either petrol or jet and diesel precursors. Glyceryl tributyrate was used for the in situ selective extraction of both acetone and alcohols to enable the simple integration of ABE fermentation and chemical catalysis, while reducing the energy demand of the overall process. This process provides a means to selectively produce petrol, jet and diesel blend stocks from lignocellulosic and cane sugars at yields near their theoretical maxima.

Integration of chemical catalysis with extractive fermentation to produce fuels.

Ventricular fibrosis is promoted by many effectors that chronically activate phospholipase D (PLD), and induces cardiac dysfunction and heart failure in cardiovascular diseases. Since ethanolamine is a product of PLD, we hypothesised that an administration of an analogue of ethanolamine, N-methylethanolamine (MEA), decreases PLD activity through a negative feedback mechanism, suppresses collagen accumulation, and thus prevents organ dysfunction. In human fibroblasts 1-butanol inhibited collagen synthesis and enhanced collagenase production, but iso-butanol did not. These indicate crucial roles of PLD in collagen synthesis and degradation. In fibroblasts, MEA dose-dependently decreased PLD activity, inhibited collagen synthesis and enhanced collagenase production. In a hypertensive heart failure model using Dahl-Iwai salt-sensitive rats, PLD activity increased with progressive ventricular fibrosis, leading to myocardial stiffening and overt heart failure. Long-term administration of MEA did not significantly decrease blood pressure, however, but decreased PLD activity and collagen content with inhibited gene expression of collagens, leading to the prevention of myocardial stiffening and haemodynamic deterioration. MEA also attenuated ventricular hypertrophy, another detrimental structural alteration. MEA may exert therapeutic effects on cardiac disorders due to ventricular fibrosis through suppression of PLD activity and modulation of the fibrosis pathway even without relief from mechanical stress.

N-methylethanolamine attenuates cardiac fibrosis and improves diastolic function: inhibition of phospholipase D as a possible mechanism.

To investigate fructose metabolic changes in patients with diabetes. Serum and urinary fructose concentrations were determined in healthy subjects (n = 23) and in nondiabetic (n = 23) and diabetic patients (n = 26). Fructose was measured using our newly developed method, and (13)C(6)-fructose was used as the internal standard. After adding sample to a fixed amount of internal standard, ion-exchange resins and high-performance liquid chromatography pretreatments were performed. Then, the amount of fructose in the sample was measured by gas chromatography-mass spectrometry. Serum fructose concentrations in patients with diabetes (12.0 +/- 3.8 micromol/l) were significantly higher than those in healthy subjects (8.1 +/- 1.0 micromol/l, P < 0.001) and nondiabetic patients (7.7 +/- 1.6 micromol/l, P < 0.001), and daily urinary fructose excretion was significantly greater in patients with diabetes (127.8 +/- 106.7 micromol/day) than in nondiabetic patients (37.7 +/- 23.0 micromol/day, P < 0.001). In patients with diabetes (n = 20), serum fructose concentrations (8.6 +/- 1.8 micromol/l, P < 0.001) and daily urinary fructose excretion (63.4 +/- 63.8 micromol/day, P < 0.01) significantly decreased by week 2 after admission. The present results differed from those of previous studies in that we found that the serum and urinary fructose concentrations decreased rapidly, concomitant with an improvement in glycemia. Therefore, hyperglycemia was associated with increased serum and urinary fructose concentrations in patients with diabetes.

Increased fructose concentrations in blood and urine in patients with diabetes.

Using R-beta-[1-(11)C]hydroxybutyrate and positron emission tomography, we studied the effect of acute hyperketonemia (range 0.7-1.7 micromol/ml) on cerebral ketone body utilization in six nondiabetic subjects and six insulin-dependent diabetes mellitus (IDDM) patients with average metabolic control (HbA(1c) = 8.1 +/- 1.7%). An infusion of unlabeled R-beta-hydroxybutyrate was started 1 h before the bolus injection of R-beta-[1-(11)C]hydroxybutyrate. The time course of the radioactivity in the brain was measured during 10 min. For both groups, the utilization rate of ketone bodies was found to increase nearly proportionally with the plasma concentration of ketone bodies (1.0 +/- 0.3 micromol/ml for nondiabetic subjects and 1.3 +/- 0.3 micromol/ml for IDDM patients). No transport of ketone bodies from the brain could be detected. This result, together with a recent study of the tissue concentration of R-beta-hydroxybutyrate in the brain by magnetic resonance spectroscopy, indicate that, also at acute hyperketonemia, the rate-limiting step for ketone body utilization is the transport into the brain. No significant difference in transport and utilization of ketone bodies could be detected between the nondiabetic subjects and the IDDM patients.

Effect of acute hyperketonemia on the cerebral uptake of ketone bodies in nondiabetic subjects and IDDM patients.

Perovskite solar cells with power conversion efficiencies exceeding 16% at AM 1.5 G one sun illumination are developed using the black polymorph of formamidnium lead iodide, HC(NH2)2 PbI3 . Compared with CH3 NH3 PbI3 , HC(NH2 )2 PbI3 extends its absoprtion to 840 nm and shows no phase transition between 296 and 423 K. Moreover, a solar cell based on HC(NH2 )2 PbI3 exhibits photostability and little I-V hysteresis.

High-efficiency perovskite solar cells based on the black polymorph of HC(NH2)2 PbI3.

Postprandial hyperglycemia is often inadequately assessed in diabetes management. Serum 1,5-anhydroglucitol (1,5-AG) drops as serum glucose rises above the renal threshold for glucose and has been proposed as a marker for postprandial hyperglycemia. The objective of this study is to demonstrate the relationship between 1,5-AG and postprandial hyperglycemia, as assessed by the continuous glucose monitoring system (CGMS) in suboptimally controlled patients with diabetes. Patients with type 1 or type 2 diabetes and an HbA(1c) (A1C) between 6.5 and 8% with stable glycemic control were recruited from two sites. A CGMS monitor was worn for two consecutive 72-h periods. Mean glucose, mean postmeal maximum glucose (MPMG), and area under the curve for glucose above 180 mg/dl (AUC-180), were compared with 1,5-AG, fructosamine (FA), and A1C at baseline, day 4, and day 7. 1,5-AG varied considerably between patients (6.5 +/- 3.2 mug/ml [means +/- SD]) despite similar A1C (7.3 +/- 0.5%). Mean 1,5-AG (r = -0.45, P = 0.006) correlated with AUC-180 more robustly than A1C (r = 0.33, P = 0.057) or FA (r = 0.38, P = 0.88). MPMG correlated more strongly with 1,5-AG (r = -0.54, P = 0.004) than with A1C (r = 0.40, P = 0.03) or FA (r = 0.32, P = 0.07). 1,5-AG reflects glycemic excursions, often in the postprandial state, more robustly than A1C or FA. 1,5-AG may be useful as a complementary marker to A1C to assess glycemic control in moderately controlled patients with diabetes.

1,5-anhydroglucitol and postprandial hyperglycemia as measured by continuous glucose monitoring system in moderately controlled patients with diabetes.

Numerous low-Mr metabolites--including creatinine, citrate, hippurate, glucose, ketone bodies, and various amino acids--have been identified in 400- and 500-MHz proton nuclear magnetic resonance (1H NMR) spectra of intact human urine. The presence of many of these was related to the specific condition of the donors: humans in different physiological states (resting, fasting, or post-exercise) and pathological conditions (e.g., diabetes mellitus, cadmium-induced renal dysfunction). We have also monitored the metabolism of simple nonendogenous compounds (methanol and ethanol) and of acetaminophen. The pH-dependencies of the NMR chemical shifts of some urine components are reported. Our studies show that high-resolution 1H NMR spectroscopy provides a fast, simple method for "fingerprint" identification of urinary compounds. In some cases, analytes can be quantified by standard additions or by comparing integrated peak areas for the metabolites with those for creatinine. Determinations of creatinine by 1H NMR spectroscopy compared well with those by an independent chemical assay based on the Jaffé reaction.

Use of high-resolution proton nuclear magnetic resonance spectroscopy for rapid multi-component analysis of urine.

The total and partial solubility parameters (dispersion, polar and hydrogen-bonding solubility parameters) of ten ionic liquids were determined. Intrinsic viscosity approaches were used that encompassed a one-dimensional method (1D-Method), and two different three-dimensional methods (3D-Method1 and 3D-Method2). The effect of solvent type, the dimethylacetamide (DMA) fraction in the ionic liquid, and dissolution temperature on solubility parameters were also investigated. For all types of effect, both the 1D-Method and 3D-Method2 present the same trend in the total solubility parameter. The partial solubility parameters are influenced by the cation and anion of the ionic liquid. Considering the effect on partial solubility parameters of the solvent type in the ionic liquid, it was observed that in both 3D methods, the dispersion and polar parameters of a 1-ethyl-3-methylimidazolium acetate/solvent (60:40 vol %) mixture tend to increase as the total solubility parameter of the solvent increases.

Determination of solubility parameters of ionic liquids and ionic liquid/solvent mixtures from intrinsic viscosity.

Structure control in solution-processed hybrid perovskites is crucial to design and fabricate highly efficient solar cells. Here, we utilize in situ grazing incidence wide-angle X-ray scattering and scanning electron microscopy to investigate the structural evolution and film morphologies of methylammonium lead tri-iodide/chloride (CH3NH3PbI(3-x)Cl(x)) in mesoporous block copolymer derived alumina superstructures during thermal annealing. We show the CH3NH3PbI(3-x)Cl(x) material evolution to be characterized by three distinct structures: a crystalline precursor structure not described previously, a 3D perovskite structure, and a mixture of compounds resulting from degradation. Finally, we demonstrate how understanding the processing parameters provides the foundation needed for optimal perovskite film morphology and coverage, leading to enhanced block copolymer-directed perovskite solar cell performance.

Thermally induced structural evolution and performance of mesoporous block copolymer-directed alumina perovskite solar cells.

Growing interest in the use of both the logarithm of the partition coefficient of the neutral species in the alkane/water system (log P(N)(alk)) and the difference between log P(N)(oct) (the logarithm of the partition coefficient of the neutral species in the n-octanol/water system) and log P(N)(alk) (Deltalog P(N)(oct-alk)) in the early stages of drug design has stimulated development of a computational tool based on the Volsurf software to predict virtual (=of each conformer) log P(N)(alk) and virtual log P(N)(oct). From these two pieces of data, it is then possible to calculate Deltalog P(N)(oct-alk) for a given compound as the difference between log P(N)(oct) and log P(N)(alk). Once the pK(a) is known and the legitimacy of neglecting the contribution made by the ionized species has been checked, it is also possible to calculate log D(pH)(alk), which might be an important lipophilicity descriptor in absorption, distribution, metabolism, and excretion (ADME) prediction, from log P(N)(alk).

正丁醇

99.9%

属性

质量水平

蒸汽密度

蒸汽压

测定

形式

自燃温度

expl. lim.

杂质

颜色

折射率

pH值（酸碱度）

bp

mp

溶解性

密度

痕量阳离子

SMILES string

InChI

InChI key

相关类别

说明

一般描述

应用

包装

其他说明

安全信息

象形图

警示用语：

危险声明

预防措施声明

危险分类

储存分类代码

WGK

闪点(F)

闪点(C)

文件

分析证书

原产地证书 (CofO)

更多文件

Quotes and Ordering

同行评审论文

技术服务