Skip to Content
Merck
  • An overview of zirconia dental implants: basic properties and clinical application of three cases.

An overview of zirconia dental implants: basic properties and clinical application of three cases.

The Journal of oral implantology (2014-08-12)
Merve Bankoğlu Güngör, Cemal Aydın, Handan Yılmaz, Esma Başak Gül
ABSTRACT

Due to the possible aesthetic problems of titanium implants, the developments in ceramic implant materials are increasing. Natural tooth colored ceramic implants may be an alternative to overcome aesthetic problems. The purpose of this article is to give information about the basic properties of dental zirconia implants and present 3 cases treated with two-piece zirconia implants. Two-piece zirconia dental implants, 4.0 mm diameter and 11.5 mm in length, were inserted into maxillary incisor region. They were left for 6 months to osseointegrate. Panoramic and periapical radiographs were obtained and examined for bone-implant osseointegration. During the follow-up period the patients were satisfied with their prosthesis and no complication was observed.

MATERIALS
Product Number
Brand
Product Description

Zirconium, tube, 500mm, outside diameter 2.0mm, inside diameter 1.6mm, wall thickness 0.2mm, annealed, 99.2%
Zirconium, tube, 100mm, outside diameter 12.7mm, inside diameter 9.5mm, wall thickness 1.6mm, annealed, 99.2%
Zirconium, rod, 100mm, diameter 3.0mm, centerless ground, 99.2%
Zirconium, rod, 200mm, diameter 1.5mm, 99.2%
Zirconium, sponge, 50g, max. size 25mm, 99.2%
Zirconium, wire reel, 0.5m, diameter 0.05mm, as drawn, 99.2%
Zirconium, rod, 200mm, diameter 3.0mm, centerless ground, 99.2%
Zirconium, rod, 200mm, diameter 5.0mm, centerless ground, 99.2%
Zirconium, wire reel, 20m, diameter 0.28mm, annealed, 99.2%
Zirconium, rod, 200mm, diameter 2.0mm, centerless ground, 99.2%
Zirconium, rod, 500mm, diameter 6.0mm, centerless ground, 99.2%
Zirconium, tube, 1000mm, outside diameter 6.35mm, inside diameter 4.55mm, wall thickness 0.9mm, annealed, 99.2%
Zirconium, rod, 500mm, diameter 12.7mm, centerless ground, 99.2%
Sigma-Aldrich
Yttrium sputtering target, diam. × thickness 2.00 in. × 0.25 in., 99.9% trace metals basis
Zirconium, rod, 1000mm, diameter 2.0mm, centerless ground, 99.2%
Zirconium, rod, 100mm, diameter 5.0mm, centerless ground, 99.2%
Zirconium, sponge, 200g, max. size 25mm, 99.2%
Zirconium, rod, 1000mm, diameter 6.0mm, centerless ground, 99.2%
Sigma-Aldrich
Yttrium, chips, 99.9% trace rare earth metals basis
Sigma-Aldrich
Zirconium, rod, diam. 6.35 mm, ≥99% trace metals basis
Sigma-Aldrich
Zirconium, foil, thickness 0.1 mm, 99.98% trace metals basis
Zirconium, foil, 100x100mm, thickness 0.125mm, annealed, 99.2%
Zirconium, foil, 15mm disks, thickness 0.25mm, annealed, 99.2%
Zirconium, foil, 100x100mm, thickness 2.0mm, annealed, 99.2%
Zirconium, foil, 15mm disks, thickness 0.0125mm, 99.2%
Zirconium, foil, 2m coil, thickness 0.025mm, annealed, 99.2%
Zirconium, foil, 1m coil, thickness 0.025mm, annealed, 99.2%
Zirconium, foil, 10mm disks, thickness 0.015mm, 99.2%
Zirconium, foil, 1m coil, thickness 0.02mm, 99.2%
Zirconium, foil, 10mm disks, thickness 0.01mm, 99.2%