FALP04700
PTFE Membrane Filter, 1.0 μm Pore Size
Fluoropore®, filter diam. 47 mm, hydrophobic
Synonym(s):
Fluoropore® Membrane Filter, Hydrophobic Polytetrafluoroethylene membrane filter discs
About This Item
Skip To
material
PTFE membrane
plain filter
white filter
sterility
non-sterile
feature
hydrophobic
manufacturer/tradename
Fluoropore®
Millipore
sustainability
Greener Alternative Product
parameter
≥150 mL/min-cm2 flow rate (27.5inHg, methanol)
≥300 mL/min-cm2 air flow rate (Gurley)
130 °C max. temp. (Curling observed at elevated temperatures)
diam.
47 mm
filter diam.
47 mm
thickness
≥100 μm
gravimetric extractables
≤0.5%
matrix
Fluoropore®
pore size
1.0 μm pore size
≥65 % porosity
bubble point
≥6.5 psi (0.45 bar), air with methanol at 23 °C
greener alternative category
shipped in
ambient
Looking for similar products? Visit Product Comparison Guide
1 of 4
This Item | FHLP04700 | FALP09050 | FALP02500 |
|---|---|---|---|
| parameter ≥150 mL/min-cm2 flow rate (27.5inHg, methanol), 130 °C max. temp. (Curling observed at elevated temperatures), ≥300 mL/min-cm2 air flow rate (Gurley) | parameter ≥60 mL/min-cm2 flow rate (27.5 inHg, methanol), >0.5 L/min-cm2 air flow rate (Gurley), 100 °C max. temp. (Curling may occur at elevated temperatures) | parameter ≥150 mL/min-cm2 flow rate (27.5inHg, methanol), ≥300 mL/min-cm2 air flow rate (Gurley), 130 °C max. temp. (Curling observed at elevated temperatures) | parameter ≥150 mL/min-cm2 flow rate (27.5inHg, methanol), ≥300 mL/min-cm2 air flow rate (Gurley), 130 °C max. temp. (Curling observed at elevated temperatures) |
| manufacturer/tradename Fluoropore®, Millipore | manufacturer/tradename Fluoropore®, Millipore | manufacturer/tradename Fluoropore®, Millipore | manufacturer/tradename Fluoropore®, Millipore |
| material PTFE membrane, white filter, plain filter | material PTFE membrane, plain filter, white filter | material PTFE membrane, plain filter, white filter | material PTFE membrane, plain filter, white filter |
| pore size 1.0 μm pore size, ≥65 % porosity | pore size 0.45 μm pore size, >60 % porosity | pore size 1.0 μm pore size, ≥65 % porosity | pore size 1.0 μm pore size, ≥65 % porosity |
| sterility non-sterile | sterility non-sterile | sterility non-sterile | sterility non-sterile |
| feature hydrophobic | feature hydrophobic | feature hydrophobic | feature hydrophobic |
General description
Application
- Clarifying acids, bases, and solvents
- Filtering or venting gases
- UV spectroscopy
- Particle monitoring
- HPLC, UPLC, LC-MS/MS mobile phase filtration
- Microplastics analysis
Features and Benefits
- Fluoropore® membranes display consistency and provide broad chemical compatibility.
- Biologically and chemically inert.
- High porosity yields high flow rates.
- Available for filtration of aqueous and organic-based samples.
Legal Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service