FHLP04700
PTFE Membrane Filter, 0.45 μm Pore Size
Fluoropore®, filter diam. 47 mm, hydrophobic
Synonym(s):
Fluoropore Membrane Filter, Hydrophobic Polytetrafluoroethylene membrane filter discs
About This Item
Recommended Products
material
PTFE membrane
plain filter
white filter
Quality Level
sterility
non-sterile
feature
hydrophobic
manufacturer/tradename
Fluoropore®
Millipore
sustainability
Greener Alternative Product
parameter
≥60 mL/min-cm2 flow rate (27.5 inHg, methanol)
>0.5 L/min-cm2 air flow rate (Gurley)
100 °C max. temp. (Curling may occur at elevated temperatures)
diam.
47 mm
filter diam.
47 mm
thickness
109 μm , (typical)
gravimetric extractables
≤0.5%
matrix
Fluoropore®
pore size
0.45 μm pore size
>60 % porosity
bubble point
≥0.63 bar, air with methanol at 23 °C
greener alternative category
shipped in
ambient
Looking for similar products? Visit Product Comparison Guide
1 of 4
This Item | FALP04700 | FALP02500 | FALP03700 |
|---|---|---|---|
| material PTFE membrane, white filter, plain filter | material PTFE membrane, plain filter, white filter | material PTFE membrane, plain filter, white filter | material PTFE membrane, plain filter, white filter |
| parameter ≥60 mL/min-cm2 flow rate (27.5 inHg, methanol), 100 °C max. temp. (Curling may occur at elevated temperatures), >0.5 L/min-cm2 air flow rate (Gurley) | parameter ≥150 mL/min-cm2 flow rate (27.5inHg, methanol), ≥300 mL/min-cm2 air flow rate (Gurley), 130 °C max. temp. (Curling observed at elevated temperatures) | parameter ≥150 mL/min-cm2 flow rate (27.5inHg, methanol), ≥300 mL/min-cm2 air flow rate (Gurley), 130 °C max. temp. (Curling observed at elevated temperatures) | parameter ≥150 mL/min-cm2 flow rate (27.5inHg, methanol), ≥300 mL/min-cm2 air flow rate (Gurley), 130 °C max. temp. (Curling observed at elevated temperatures) |
| pore size 0.45 μm pore size, >60 % porosity | pore size 1.0 μm pore size, ≥65 % porosity | pore size 1.0 μm pore size, ≥65 % porosity | pore size 1.0 μm pore size, ≥65 % porosity |
| manufacturer/tradename Fluoropore®, Millipore | manufacturer/tradename Fluoropore®, Millipore | manufacturer/tradename Fluoropore®, Millipore | manufacturer/tradename Fluoropore®, Millipore |
| sterility non-sterile | sterility non-sterile | sterility non-sterile | sterility non-sterile |
| feature hydrophobic | feature hydrophobic | feature hydrophobic | feature hydrophobic |
General description
- Fluoropore® is a polytetrafluoroethylene (PTFE) membrane bonded to high-density polyethylene (HDPE) support for easier handling.
- The hydrophobic membrane has broad chemical compatibility, high flow rates, and consistency.
- Ideal for Clarifying acids, bases and solvents; Air monitoring; Filtering or venting gases; UV spectroscopy.
Application
- Clarifying acids, bases, and solvents
- Filtering or venting gases
- UV spectroscopy
- Particle monitoring
- HPLC, UPLC, LC-MS/MS mobile phase filtration
- Microplastics analysis
Legal Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Customers Also Viewed
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service
