GVHP04700
PVDF Membrane Filter, 0.22 μm Pore Size
Durapore®, filter diam. 47 mm, hydrophobic
Synonym(s):
Durapore® Membrane Filter, 0.22 µm
About This Item
material
PVDF membrane
plain filter
white filter
Quality Level
sterility
non-sterile
feature
hydrophobic
manufacturer/tradename
Durapore®
Millipore
sustainability
Greener Alternative Product
parameter
≥16 mL/min-cm2 air flow rate ((Gurley))
>1 mL/min-cm2 water flow rate (at 25 inches Hg withmethanol prewet)
85 °C max. temp.
diam.
47 mm
filter diam.
47 mm
thickness
125 μm , typical
gravimetric extractables
0.5%
refractive index
n/D 1.42
matrix
Durapore®
pore size
0.22 μm pore size
≥65 % porosity
capacity
150 μg/cm2
bubble point
≥18 psi (1.24 bar), air with methanol
greener alternative category
shipped in
ambient
Looking for similar products? Visit Product Comparison Guide
1 of 4
This Item | GVWP10050 | GVHP00010 | GVHP01300 |
|---|---|---|---|
| parameter ≥16 mL/min-cm2 air flow rate ((Gurley)), 85 °C max. temp., >1 mL/min-cm2 water flow rate (at 25 inches Hg withmethanol prewet) | parameter >1 mL/min-cm2 water flow rate, 2 L/min-cm2 air flow rate, 85 °C max. temp. | parameter ≥16 mL/min-cm2 air flow rate ((Gurley)), >1 mL/min-cm2 water flow rate (at 25inches Hg with methanol prewet), 85 °C max. temp. | parameter ≥16 mL/min-cm2 air flow rate ((Gurley)), >1 mL/min-cm2 water flow rate (at 25inches Hg with methanol prewet), 85 °C max. temp. |
| pore size 0.22 μm pore size, ≥65 % porosity | pore size 0.22 μm pore size, 70 % porosity | pore size 0.22 μm pore size, ≥65 % porosity | pore size 0.22 μm pore size, ≥65 % porosity |
| manufacturer/tradename Durapore®, Millipore | manufacturer/tradename Durapore®, Millipore | manufacturer/tradename Durapore®, Millipore | manufacturer/tradename Durapore®, Millipore |
| material PVDF membrane, white filter, plain filter | material PVDF membrane, plain filter, white filter | material PVDF membrane, plain filter, white filter | material PVDF membrane, plain filter, white filter |
| sterility non-sterile | sterility - | sterility non-sterile | sterility non-sterile |
| feature hydrophobic | feature hydrophilic | feature hydrophobic | feature hydrophobic |
General description
Application
- Air sterilization
- Gas sterilization
- Solvent filtration
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 μm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 μm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
Storage Class Code
11 - Combustible Solids
WGK
WGK 3
Regulatory Listings
Regulatory Listings are mainly provided for chemical products. Only limited information can be provided here for non-chemical products. No entry means none of the components are listed. It is the user’s obligation to ensure the safe and legal use of the product.
JAN Code
GVHP04700:
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service
