Merck
All Photos(1)

Documents

GVWP04700

Millipore

PVDF Membrane Filter, 0.22 μm Pore Size

Durapore®, filter diam. 47 mm, hydrophilic

Sign Into View Organizational & Contract Pricing

Synonym(s):
Durapore® Membrane Filter, 0.22 µm, Hydrophilic PVDF cut disc membrane filter, Polyvinylidene difluoride membrane filter discs, Polyvinylidene fluoride membrane filter, Polyvinylidene fluoride membrane filter discs
eCl@ss:
32031602
NACRES:
NB.24

material

PVDF membrane
plain filter
white filter

Quality Level

sterility

non-sterile

feature

hydrophilic

manufacturer/tradename

Durapore®
Millipore

parameter

>1 mL/min-cm2 water flow rate
2 L/min-cm2 air flow rate
85 °C max. temp.

filter diam.

47 mm

thickness

125 μm

gravimetric extractables

0.5%

refractive index

n/D 1.42

matrix

Durapore®

pore size

0.22 μm pore size
70 % porosity

bubble point

≥3.45 bar, air with water at 23 °C

shipped in

ambient

Looking for similar products? Visit Product Comparison Guide

Compare Similar Items

View Full Comparison

Show Differences

1 of 4

This Item
GVWP09050GVWP14250GVWP01300
parameter

2 L/min-cm2 air flow rate, >1 mL/min-cm2 water flow rate, 85 °C max. temp.

parameter

>1 mL/min-cm2 water flow rate, 2 L/min-cm2 air flow rate, 85 °C max. temp.

parameter

>1 mL/min-cm2 water flow rate, 2 L/min-cm2 air flow rate, 85 °C max. temp.

parameter

>1 mL/min-cm2 water flow rate, 2 L/min-cm2 air flow rate, 85 °C max. temp.

material

PVDF membrane, white filter, plain filter

material

PVDF membrane, plain filter, white filter

material

PVDF membrane, plain filter, white filter

material

PVDF membrane, plain filter, white filter

pore size

0.22 μm pore size, 70 % porosity

pore size

0.22 μm pore size, 70 % porosity

pore size

0.22 μm pore size, 70 % porosity

pore size

0.22 μm pore size, 70 % porosity

sterility

non-sterile

sterility

non-sterile

sterility

non-sterile

sterility

non-sterile

feature

hydrophilic

feature

hydrophilic

feature

hydrophilic

feature

hydrophilic

General description

Membrane filtration before separation via liquid chromatography removes contaminating particles from solvents and mobile phases, increasing column life, preventing system failure, and ensuring pure samples for downstream mass spectrometric analysis.

Application

Sterilizing filtration of biological solutions

Features and Benefits

  • provides high flow rates and throughput, low extractables, and broad chemical compatibility
  • solvent and heat resistant
  • exhibits very low protein binding to minimize interaction with the sample and maximize recovery
  • varied pores sizes to suit different application needs

Other Notes

Directions for Use

  • Organism Retention: Microorganism
  • Mode of Action: Filtration (size exclusion)
  • Application: General laboratory filtration
  • Intended Use: Retention or removal of biological contaminants
  • Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 μm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 μm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
  • Storage Statement: Store in dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

Storage Class Code

11 - Combustible Solids

WGK

WGK 3


Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service