SX0001300

Swinnex Filter Holder

Swinnex Filter Holder, 13mm

• Synonym(s): Polypropylene filter holder
• eCl@ss: 32031613
• NACRES: NB.24

Properties

• material: polypropylene device; silicone gasket; silicone seal
• Quality Level: 100
• manufacturer/tradename: Swinnex^®
• parameter: 121 °C max. temp.; 3.5 bar max. inlet pressure (50 psi)
• L: 3.5 cm
• diam.: 1.7 cm
• filter diam.: 13 mm
• filtration area: 0.7 cm²
• prefilter diam.: 10 mm , thick depth prefilter
• pore size: 0.1 μm nominal pore size; 0.5 μm nominal pore size
• fitting: female Luer-Lok^® inlet connection; female Luer-Lok^® inlet fitting; male Luer outlet slip
• application(s): filtration
• compatibility: for use with Sterifil Aseptic System
• shipped in: ambient

Description

General description

Make your own syringe filter! Swinnex filter holders give you the flexibility to select the membrane type and diameter that are most appropriate for your application. For sterile filtration, autoclave you Swinnex filter holders with the membrane in place. Ultraclean or sterilize small volumes of liquids dispensed by a syringe or install in-line to filter larger volumes.

Features & Benefits:
•Available in three sizes for a range of process volumes
•Autoclavable with filter in place for sterile filtration

SX0001300 Swinnex Filter Holder, 13 mm
SX0002500 Swinnex Filter Holder, 25 mm
SX0004700 Swinnex Filter Holder, 47 mm

Replacement Parts
SX0001301 Silicone Gaskets for 13 mm Swinnex Filter Holder
SX0002501 Silicone Gaskets for 25 mm Swinnex Filter Holder
XX2702510 Support Screen, 25 mm, polypropylene
XX1104715 Support Screen, 47 mm, polypropylene
XX1104707 O-ring (5-329) for Swinnex 47 mm Filter Holder, silicone
SX0004701 Base O-ring for Swinnex 47 mm Filter Holder, silicone
SX00047RK Replacement Parts Kit for Swinnex 47 mm Filter Holder

Packaging

10 ea

Application

Swinnex Filter Holder, 13mm

Principle

Pressure

Preparation Note

Sterilization Method
Autoclavable with filter in place

Legal Information

Luer-Lok is a registered trademark of Becton-Dickinson & Co.

SWINNEX is a registered trademark of Merck KGaA, Darmstadt, Germany