The Micro Connectors (67400-U) used with ATIS extraction glassware 28523-U are equipped with phenolic caps containing a Teflon inner part for the passage of the sample. While no specific pressure rating is provided for these connectors, both the Micro-Connector and Ground-Glass versions can be used at =/< 25" of water at a 125ml/minute flow rate. it is recommended to consider using the 19/22 ground-glass version as a replacement for the Micro Connector (64700-U). Additionally, manuals for the Purge and Trap/Humidifier Module Accessory are available upon request.
28523-U
ATIS Extraction Glassware with Micro Connector
Skip To
fitting
connector (20/20)
application(s)
air monitoring
environmental
industrial hygiene
1 of 4
This Item | |||
|---|---|---|---|
| fitting connector (20/20) | fitting - | fitting - | fitting - |
| application(s) air monitoring | application(s) air monitoring | application(s) air monitoring | application(s) air monitoring |
General description
Use the ATIS to thermally extract samples onto an adsorbent tube. The opening in the glassware will accepts solid samples up to 1/2 in. (13mm) in diameter and up to 3" long (76mm) to be inserted into the glassware. The extraction glassware simply slides into the ATIS heating block. Two types of glass joints are available.
Choose from one of the most recent versions:
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
-
Provide details about the materials used in the joint of Micro Connector 28523-U and the pressures it can accept? Additionally, having access to a user manual for this product would be helpful in determining if it is suitable as per the needs.
1 answer-
Helpful?
-
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service