コンテンツへスキップ
Merck

768618

Sigma-Aldrich

ポリ(3,4-エチレンジオキシチオフェン)-ポリ(スチレンスルホナート)

dry re-dispersible pellets

別名:

Orgacon DRY, PEDOT:PSS, ポリ(2,3-ジヒドロチエノ-1,4-ジオキシン)-ポリ(スチレンスルホナート)

Slide 1 of 3
ログイン組織・契約価格を表示する

サイズを選択してください

1 G
¥11,200
5 G
¥47,200

¥11,200


本日発送予定詳細


バルクの問い合わせ

この商品について

MDL番号:
UNSPSCコード:
12352103
NACRES:
NA.23

スキップする


テクニカルサービス
お困りのことがあれば、経験豊富なテクニカルサービスチームがお客様をサポートします。
お手伝いします

詳細

Electrodes

品質水準

フォーム

dry re-dispersible pellets

抵抗

200-450 Ω/sq

mp

>300 °C

類似した製品をお探しですか? 訪問 製品比較ガイド

類似品目との比較

比較内容をすべて表示

相違点を表示

1 of 4

当該品目
768650739324900181
form

dry re-dispersible pellets

form

paste

form

liquid

form

dispersion

mp

>300 °C

mp

-

mp

-

mp

-

resistance

200-450 Ω/sq

resistance

≤130 Ω/sq

resistance

<100 Ω/sq, >70% visible light transmission (40 μm wet)

resistance

-

Quality Level

100

Quality Level

100

Quality Level

100

Quality Level

100

詳細

  • 活性化学物質PEDOT/PSS
  • 外観は青灰色のペレット
  • 最大含水量15%(RH 50%、22℃)
  • 保存状態での保管期限24ヵ月
ポリ(3,4-エチレンジオキシチオフェン)-ポリ(スチレンスルホン酸)(PEDOT:PSS)は、3,4-エチレンジオキシチオフェンをポリ(スチレンスルホン酸)(PSS)溶液中で電解重合して形成される導電性ポリマーです。PEDOTは陽イオンで、PSSは陰イオンでドープします。PEDOT:PSSは低コストのCPで、(分散性ペレットなどの)物理的外観を持たせて生産されます。次のような特性があるため、PEDOT:PSSは有機エレクトロニクスにおいて実用的なポリマーとなっています。[1][2]
  • 良好な光学特性。
  • 高い導電率。
  • ナノ粒子の官能基化。
  • 高い熱安定性。
  • 加工しやすさ。

ポリ(スチレンスルホン酸)アニオンをドープしたポリ(3,4-エチレンジオキシチオフェン)(PEDOT / PSS)などの導電性ポリマーは、様々なオプトエレクトロニクス機器で広く使用されています。[3][4][5] PEDOT:PSSは、ポリアニオンをドープしたカチオン性ポリチオペン誘導体の配合物です。このようなポリマーは、その高い導電性と優れた耐酸化性により、電磁シールドとノイズ抑制に適しています。したがって、ポリマーフィルムは、可視光スペクトル全体、さらにはIR付近及びUV付近にも高い透明度を持ちながら、900〜2,000 nmではほぼ100%吸収することが示されています。 400-800 nmで吸収極大はありません。ポリマーに対する小さな電場と磁場の影響が調査されています。 [6]

アプリケーション

Orgacon DRYは、UV硬化性モノマー(少量の水に適しています)およびプレポリマーをベースとする、水に敏感な配合物に特に有用です。

Orgacon DRYペレットは、エタノールなどの有機溶媒に再分散できます。得られた分散液は、様々な用途を対象としたコーティングまたはインクの配合に使用できます。

PEDOT/PSSの主要な特性は、エタノールなどの極性有機溶媒中で保持されます。表面抵抗:200〜450オーム/平方、可視光線透過率:約85%
PEDOT:PSSは、電荷移動度が高い導電性材料として使用できます。有機プリンタブルエレクトロニクス、テキスタイルエレクトロニクス、電気化学的貯蔵、スーパーキャパシター、リチウムイオン電池などの広範囲のエネルギーベースの用途に使用できます。[7][8][9][10]
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.

調製ノート

溶媒としてS300 EtOH(3.5% wt.未満のH2Oを含む)を使用してスピンコートした場合、ASTM D 1003(基材を除く)による可視光線透過率(VLT)は85%、表面抵抗は450オーム/平方です。

法的情報

Product of Agfa-Gevaert N.V.
Orgacon is a trademark of Agfa-Gevaert N.V.

ピクトグラム

Corrosion

シグナルワード

Danger

危険有害性情報

危険有害性の分類

Eye Dam. 1

保管分類コード

11 - Combustible Solids

WGK

WGK 3

引火点(°F)

Not applicable

引火点(℃)

Not applicable


適用法令

試験研究用途を考慮した関連法令を主に挙げております。化学物質以外については、一部の情報のみ提供しています。 製品を安全かつ合法的に使用することは、使用者の義務です。最新情報により修正される場合があります。WEBの反映には時間を要することがあるため、適宜SDSをご参照ください。

Jan Code

768618-BULK:
768618-5G:
768618-1G:
768618-VAR:


最新バージョンのいずれかを選択してください:

試験成績書(COA)

Lot/Batch Number

適切なバージョンが見つかりませんか。

特定のバージョンが必要な場合は、ロット番号またはバッチ番号で特定の証明書を検索できます。

以前この製品を購入いただいたことがある場合

文書ライブラリで、最近購入した製品の文書を検索できます。

文書ライブラリにアクセスする

Wet-spinning of PEDOT: PSS/functionalized-SWNTs composite: a facile route toward production of strong and highly conducting multifunctional fibers.
Jalili R, et al.
Scientific reports, 3(18), 3438-3438 (2013)
Foldable Textile Electronic Devices Using All-Organic Conductive Fibers.
Miura H, et al.
Advanced Engineering Materials, 16(5), 550-555 (2014)
Exploiting high quality PEDOT: PSS-SWNT composite formulations for wet-spinning multifunctional fibers.
Jalili R, et al.
Journal of Materials Chemistry, 22(48), 25174-25182 (2012)
Three dimensional cellular architecture of sulfur doped graphene: self-standing electrode for flexible supercapacitors, lithium ion and sodium ion batteries.
Islam MM, et al.
Journal of Material Chemistry A, 5(11), 5290-5302 (2017)
Synthesis and optimization of PEDOT: PSS based ink for printing nanoarrays using Dip-Pen Nanolithography.
Wagner M, et al.
Synthetic Metals, 181(18), 64-71 (2013)

資料

Progress in solution-processed functional materials leads to thin-film optoelectronic devices for industrial and consumer electronics.

Self-healing soft electronic materials offer potential cost savings and reduced electronic waste.

Progress in Organic Thermoelectric Materials & Devices including high ZT values of >0.2 at room temperature by p-type (PEDOT:PSS) & n-type (Poly[Kx(Ni-ett)]) materials are discussed.

Find advantages of inorganic interface layer inks for organic electronic & other applications.

すべて表示

質問

1–7/7 質問  
  1. How can I determine the shelf life / expiration / retest date of this product?

    1 回答
    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/418/501/product-dating-information-06-25-mk.pdf

      役に立ちましたか?

  2. Could you elaborate on the surface resistance measurement (200~450 Ohm/square)? What was the film thickness for this measurement? In particular I would like to know the electrical conductivity.

    1 回答
    1. The surface resistance is measured by a dried coating layer on a polyester substrate. The dried layer is originated from a 40 µm wet coating. Assuming the thickness of dry layer is 40 µm as well, the electrical conductivity can be converted using surface resistance via equation:

      σ= 1/ (Rs x d)

      Where:
      σ = electrical conductivity (S/cm)
      𝑅𝑠 = surface resistance (Ohm/square)
      d = thickness of the material (cm)

      If Rs = 200 Ohm/square, σ = 1 / (200 x 0.004) = 1.25 S/cm; If Rs = 450 Ohm/square, σ = 1 / (450 x 0.004) = 0.56 S/cm. The electrical conductivity should be in the range of 0.56 - 1.25 S/cm.

      役に立ちましたか?

  3. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 回答
    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      役に立ちましたか?

  4. ratio of pedot and pss?

    1 回答
    1. The ratio of PEDOT:PSS is proprietary. The only information which can be shared is that the weight percent of PEDOT:PSS is 0.8%.

      役に立ちましたか?

  5. For product 768618, Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), what is additional product information including solubility?

    1 回答
    1. Product 768618, Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate (Orgacon DRY) is not a formulation or dispersion. It consists of dry PEDOT:PSS powder/pellets (lyophilized). Because PSS (poly(styrenesulfonate) is hygroscopic, the pellets will always contain some residual water. These pellets can be redispersed in organic solvents. Orgacon DRY is not soluble in chloroform or chlorobenzene.

      役に立ちましたか?

  6. What is the Department of Transportation shipping information for this product?

    1 回答
    1. Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.

      役に立ちましたか?

  7. What can you tell me regarding the method of preparation of the PEDOT/PSS products, such as Products 768618 and 739316?

    1 回答
    1. The information on the molecular weights of the PEDOT and PSS used to make each batch is held as proprietary.The exact information on the relative amounts (by weight) of the PEDOT and PSS present in these polymers is also held as proprietary. There is a little more PSS than PEDOT; this is logical, since the formula weight for the monomeric equivalent in PSS (C7H6SO3) is a little higher than the formula weight for the monomeric equivalent in PEDOT (C6H4SO2).The solution, product 739316 is made in situ; it is not made from the dry pellets (product 768618).

      役に立ちましたか?

レビュー

評価値なし

アクティブなフィルタ

ライフサイエンス、有機合成、材料科学、クロマトグラフィー、分析など、あらゆる分野の研究に経験のあるメンバーがおります。.

製品に関するお問い合わせはこちら(テクニカルサービス)