SX0004700
別名:
Polypropylene filter holder
polypropylene device
silicone gasket
silicone seal
suitable for EPA 200.7
suitable for EPA 200.8
suitable for EPA 300
Swinnex®
5.2 bar max. inlet pressure (75 psi)
pressure filtration: suitable
5.4 cm
5.8 cm (2.3 in.)
47 mm
13.8 cm2
42 mm , thick depth prefilter
47 mm , membrane prefilter
1/4 in. NPT inlet connection thread(s)
1/4 in. male NPT inlet fitting (with female Luer slip interior)
female Luer outlet slip
filtration
for use with Sterifil Aseptic System
ambient
1 of 4
当該品目 | SX0002500 | SX0001300 | XX3001200 |
|---|---|---|---|
| manufacturer/tradename Swinnex® | manufacturer/tradename Swinnex® | manufacturer/tradename Swinnex® | manufacturer/tradename - |
| material polypropylene device, silicone seal, silicone gasket | material polypropylene device, silicone gasket, silicone seal | material polypropylene device, silicone gasket, silicone seal | material PTFE O-ring, PTFE gasket, PTFE seal, stainless steel housing, stainless steel screen |
| agency suitable for EPA 200.7 | agency suitable for ASTM® 7968, suitable for ASTM® 7979, suitable for EPA 8327 | agency suitable for ASTM® 7968, suitable for ASTM® 7979, suitable for EPA 8327 | agency - |
| parameter 5.2 bar max. inlet pressure (75 psi) | parameter 121 °C max. temp., 3.5 bar max. inlet pressure (50 psi) | parameter 121 °C max. temp., 3.5 bar max. inlet pressure (50 psi) | parameter 6.9 bar max. inlet pressure (100 psi) |
| technique(s) pressure filtration: suitable | technique(s) pressure filtration: suitable | technique(s) pressure filtration: suitable | technique(s) pressure filtration: suitable |
| L 5.4 cm | L 3.7 cm | L 3.5 cm | L 3.3 cm |
製品のロット番号・バッチ番号を入力して、試験成績書（COA） を検索できます。ロット番号・バッチ番号は、製品ラベルに「Lot」または「Batch」に続いて記載されています。
Is it necessary to use two different O-rings for the Swinnex 47 (SX0004700)?
Yes, two different o-rings are required for the Swinnex 47 mm filter holder (SX0004700). One is for the inlet, which is a cone-shaped component, and the other is for the base, which has a flat surface to hold the filter.
The XX1104707 o-ring seals the filter membrane in place and fits in the groove on the top (inlet) part, while the SX0004701 is the base o-ring and goes on the base (outlet).
役に立ちましたか？
What type of syringe is compatible with the SX0004700? Is an adapter required for this syringe?
It is recommended to use luer slip syringe (not luer lok) for the Swinnex 47 SX0004700, as it fits inside the inlet. No additional adapter is required. Additionally, the Swinnex 47 has a ¼ NPTM inlet, which includes the female luer slip interior.
Here are examples of syringes that are compatible with the Swinnex 47 and their sample holding capacities:
Z683590-100EA: Polypropylene LUER SLIP syringe, 10 ml, pack of 100
XX1102012: 20mL Luer slip polypropylene syringe, pack of 12
XX1105005: 50mL Luer slip polypropylene syringe, pack of 5
役に立ちましたか？
Yes, this is a package of 8 Swinnex 47mm Filter Holders.
役に立ちましたか？
ライフサイエンス、有機合成、材料科学、クロマトグラフィー、分析など、あらゆる分野の研究に経験のあるメンバーがおります。.
製品に関するお問い合わせはこちら（テクニカルサービス）
