2.7 (vs air)
0.42 mmHg ( 20 °C)
42 %, 63 °F
≤0.1% water (Karl Fischer)
n20/D 1.479 (lit.)
189 °C (lit.)
16-19 °C (lit.)
1.10 g/mL (lit.)
類似した製品をお探しですか？ Visit 製品比較ガイド
10 - Combustible liquids
188.6 °F - closed cup
87 °C - closed cup
If available for a given product, the recommended re-test date or the expiration date can be found on the Certificate of Analysis.
The lot specific COA document can be found by entering the lot number above under the "Documents" section.
There are several ways to find pricing and availability for our products. Once you log onto our website, you will find the price and availability displayed on the product detail page. You can contact any of our Customer Sales and Service offices to receive a quote. USA customers: 1-800-325-3010 or view local office numbers.
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
Pure solvents do not technically have a molarity (defined as moles of solute per liter of solution), since there is no solute distinct from the pure material. However, an effective molar concentration of 14.1M can be determined for this product, based on a density of 1.1 g/mL and a molecular weight of 78.13 g/mol.
Sigma-Aldrich ships many products, including DMSO, at ambient temperature. As a result product D5879 might arrive as a solid depending on the weather conditions during shipment. The melting point of DMSO is 16-19°C. Therefore, if the solid is allowed to warm to room temperature, it will melt without any impact on the quality of the product.
This product has a water content specification of not more than 0.1%, which may be low enough for your application. Other DMSO products may have more water present. Molecular sieves are typically zeolite compounds that strongly adsorb water and have carefully controlled pore sizes. If you would like, dried sieves may be placed into the bulk solvent container (about 5%-10% by volume) to remove most water. Sigma-Aldrich offers 4 Å molecular sieves (e.g. product 334308), which would be effective in removing residual water from DMSO.
Ask a Scientist here.