コンテンツへスキップ
Merck
  • Aluminum adjuvant dose guidelines in vaccine formulation for preclinical evaluations.

Aluminum adjuvant dose guidelines in vaccine formulation for preclinical evaluations.

Journal of pharmaceutical sciences (2011-09-16)
Simone Vecchi, Simone Bufali, David A G Skibinski, Derek T O'Hagan, Manmohan Singh
要旨

Aluminum (Al) salt-based adjuvants are present in a large variety of licensed vaccines and their use is widely considered for formulations in clinical trials. Although the regulatory agencies have clearly stated the acceptable levels of Al salts in vaccines for human use, there are no general indications for preclinical research. This brief commentary reviews the current status of Al concentrations in licensed vaccines, the related potential toxicity in preclinical species, and proposes a general guideline for selection of suitable Al salt levels in preclinical models, focusing on the formulation development for recombinant protein antigens. A table with conversion factors is included in order to provide a tool for calculation of doses with different Al salts.

材料
製品番号
ブランド
製品内容

Sigma-Aldrich
アルミニウム, ReagentPlus®, beads, 5-15 mm, 99.9% trace metals basis
Sigma-Aldrich
アルミニウム, wire, diam. 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
アルミニウム, granular, <1 mm, 99.7% trace metals basis
Sigma-Aldrich
アルミニウム, foil, thickness 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
アルミニウム, pellets, 3-12 mm, 99.99% trace metals basis
Sigma-Aldrich
アルミニウム, foil, thickness 0.45-0.55 mm, 99.999% trace metals basis
Sigma-Aldrich
アルミニウム, foil, thickness 0.13 mm, ≥99.99% trace metals basis
Sigma-Aldrich
アルミニウム, ACS reagent, 99%, wire, wire diam. ~1.5 mm
Sigma-Aldrich
アルミニウム, foil, thickness 8 μm, 99% trace metals basis
Sigma-Aldrich
アルミニウム, wire, diam. 0.58 mm, ≥99.99% trace metals basis
Sigma-Aldrich
アルミニウム, pellets, 3-8 mesh, ≥99.999% trace metals basis
Sigma-Aldrich
アルミニウム, evaporation slug, diam. × L 6.3 mm × 6.3 mm, 99.999% trace metals basis
アルミニウム, tube, 200mm, outside diameter 3.0mm, inside diameter 1.62mm, wall thickness 0.69mm, hard, 99.5%
Sigma-Aldrich
アルミニウム, foil, thickness 1.0 mm, 99.999% trace metals basis
アルミニウム, rod, 1000mm, diameter 12.7mm, 99%
アルミニウム, sphere, 100pcs, diameter 2.5mm, aluminum alloy 2017 precision sphere, grade 200, 95.2%
アルミニウム, mesh, 150x150mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh
アルミニウム, honeycomb, 600x600mm, thickness 20mm, cell size 3.2mm, cell wall 0.025mm, core density 0.072g/cm3, phenolic adhesive (resin), 99.5%
アルミニウム, mesh, 300x300mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh
アルミニウム, wire reel, 1m, diameter 0.02mm, hard, 99.99%
アルミニウム, IRMM®, certified reference material, 1.0 mm foil
アルミニウム, sphere, 100pcs, diameter 1.0mm, aluminum alloy 2017 precision sphere, grade 200, 95.2%
アルミニウム, mesh, 900x900mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh
アルミニウム, foam, 150x150mm, thickness 30mm, bulk density 0.2g/cm3, porosity 0.93, aluminum 6101 grade, 98.5%
アルミニウム, tube, 100mm, outside diameter 0.86mm, inside diameter 0.76mm, wall thickness 0.05mm, as drawn, 99.5%
アルミニウム, IRMM®, certified reference material, 0.1 mm foil
アルミニウム, foam, 150x150mm, thickness 3.2mm, bulk density 0.2g/cm3, porosity 0.93, 16 pores/cm, aluminum 6101 grade, 98.5%
アルミニウム, rod, 200mm, diameter 12.7mm, 99%
アルミニウム, foam, 150x150mm, thickness 6.35mm, bulk density 0.2g/cm3, porosity 0.93, 16 pores/cm, aluminum 6101 grade, 98.5%
アルミニウム, honeycomb, 300x300mm, thickness 5mm, cell size 19mm, cell wall 0.064mm, core density 0.029g/cm3, phenolic adhesive (resin), 99.5%