- Molar uprighting by a nickel-titanium spring based on a setup model.
Molar uprighting by a nickel-titanium spring based on a setup model.
American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics (2014-07-01)
MoonHee Kim, Minji Kim, Youn-Sic Chun
PMID24975006
ABSTRACT
Molar uprighting is an important adjunctive treatment in orthodontics: repositioning the tilted molar eliminates the potentially pathologic condition and simplifies the ultimate restorative procedure. Although various methods for molar uprighting have been applied successfully, they still have some limitations and disadvantages in tooth movement. This article reports on a new clinical technique for molar uprighting with nickel-titanium springs based on a setup model. Two patients treated with this system are shown.
MATERIALS
Product Number
Brand
Product Description
Nickel, foil, 4mm disks, thickness 0.007mm, 99.95%
Titanium, tube, 100mm, outside diameter 6.35mm, inside diameter 5.53mm, wall thickness 0.41mm, annealed, 99.6+%
Nickel, wire reel, 0.5m, diameter 1.0mm, as drawn, 99.99+%
Nickel, wire reel, 10m, diameter 0.25mm, annealed, 99%
Titanium, tube, 100mm, outside diameter 10.3mm, inside diameter 8.7mm, wall thickness 0.8mm, annealed, 99.6+%
Nickel, foil, 2m coil, thickness 0.50mm, annealed, 99%
Nickel, foil, 0.5m coil, thickness 0.05mm, annealed, 99%
Nickel, wire reel, 0.5m, diameter 0.05mm, as drawn, 99.99+%
Titanium, tube, 100mm, outside diameter 25.4mm, inside diameter 23.62mm, wall thickness 0.89mm, annealed, 99.6+%
Nickel, foil, 0.3m coil, thickness 0.125mm, as rolled, 99.99+%
Nickel, mesh, 30x30mm, nominal aperture 0.43mm, thickness 0.004mm, wire diameter 0.067mm, 51 wires/inch, open area 75%, electro-formed mesh, 99.9%
Nickel, wire reel, 100m, diameter 0.125mm, annealed, 99.98%
Titanium, tube, 100mm, outside diameter 0.51mm, inside diameter 0.35mm, wall thickness 0.08mm, annealed, 99.6+%
Nickel, foil, 10mm disks, thickness 0.015mm, 99.9%
Nickel, tube, 5mm, outside diameter 0.8mm, inside diameter 0.5mm, wall thickness 0.15mm, hard, 99.5%
Nickel, foil, 10m coil, thickness 0.125mm, coil width 50mm, annealed, 99%
Nickel, foil, 0.5m coil, thickness 0.125mm, annealed, 99%
Nickel, foil, 25x25mm, thickness 0.125mm, as rolled, 99.999%
Nickel, tube, 500mm, outside diameter 3.25mm, inside diameter 3.05mm, wall thickness 0.1mm, hard, 99.5%
Titanium, tube, 1000mm, outside diameter 12.7mm, inside diameter 10.9mm, wall thickness 0.9mm, annealed, 99.6+%
Nickel, foil, 0.5m coil, thickness 0.15mm, coil width 12mm, annealed, 99%
Nickel, microfoil, disks, 25mm, thinness 0.5μm, specific density 438.8μg/cm2, permanent mylar 3.5μm support, 99.99+%
Nickel, foil, 10mm disks, thickness 0.05mm, annealed, 99%
Nickel, foil, 10mm disks, thickness 0.005mm, as rolled, 99.9%
Nickel, foil, 50x50mm, thickness 1.0mm, annealed, 99%
Nickel, foil, 50x50mm, thickness 0.25mm, as rolled, 99.99+%
Titanium, rod, 490mm, diameter 2mm, annealed, 99.6+%
Nickel, foil, 50x50mm, thickness 0.125mm, annealed, 99%
Nickel, foil, 4mm disks, thickness 0.009mm, 99.95%
Nickel, foil, 0.5m coil, thickness 0.0075mm, 99.9%