Todas las fotos(3)



Zirconium(IV) oxide

nanopowder, <100 nm particle size (TEM)

Fórmula lineal:
Número de CAS:
Peso molecular:
Número de EC:
Número MDL:
ID de la sustancia en PubChem:

Nivel de calidad




reaction suitability

reagent type: catalyst
core: zirconium

tamaño de partícula

<100 nm (TEM)


spec. surface area ≥25 m2/g


5000 °C (lit.)


2700 °C (lit.)


5.89 g/mL at 25 °C (lit.)

SMILES string




InChI key


¿Está buscando productos similares? Visit Guía de comparación de productos

Descripción general

Zirconium(IV) oxide (ZrO2) which is also known as zirconia is a ceramic nanoparticle that can be used as a nano-filler. It can be incorporated in a variety of polymer and metal composites to improve the thermo-mechanical properties of the base material.


ZrO2 can be used as a filler material on PMMA which can further be used as a high strength denture base material. It can also be used as a composite based metallic coating that can improve the overall mechanical properties of the substrate.


5, 25 g in poly bottle

Código de clase de almacenamiento

13 - Non Combustible Solids



Punto de inflamabilidad F

Not applicable

Punto de inflamabilidad C

Not applicable

Equipo de protección personal

dust mask type N95 (US), Eyeshields, Gloves

Certificado de Análisis

Certificado de origen

Friction and wear behavior of zirconium oxide reinforced PMMA composites
Akinci A, et al.
Composites Part B: Engineering, 56(1-2), 42-47 (2014)
Support and solvent effects on the liquid-phase chemoselective hydrogenation of crotonaldehyde over Pt catalysts
Hidalgo-Carrillo J, et al.
Applied Catalysis A: General, 385(1-2), 190-200 (2010)
Paolo Vigolo et al.
Journal of prosthodontics : official journal of the American College of Prosthodontists, 17(8), 621-626 (2008-09-19)
The purpose of this study was to assess in vitro the marginal fit of four-unit fixed partial dentures (FPDs) produced using three different computer aided design/computer aided manufacturing (CAD/CAM) all-ceramic systems before and after porcelain firing cycles and after glaze
Zhongpu Zhang et al.
Acta biomaterialia, 9(9), 8394-8402 (2013-05-21)
Effective and reliable clinical uses of dental ceramics necessitate an insightful analysis of the fracture behaviour under critical conditions. To better understand failure characteristics of porcelain veneered to zirconia core ceramic structures, thermally induced cracking during the cooling phase of
Katarzyna Zielińska et al.
Journal of colloid and interface science, 377(1), 362-367 (2012-04-14)
Ni-P-nano-ZrO(2) coatings were produced using the electroless deposition technique. To prevent agglomeration of zirconia nanoparticles in the plating bath, various surfactant additives (anionic, cationic, and nonionic) were used. The most stable bath was obtained with the addition of dodecyltrimethylammonium bromide


Strategy for Toxicity Screening of Nanomaterials

A key challenge for nanomaterial safety assessment is the ability to handle the large number of newly engineered nanomaterials (ENMs), including developing cost-effective methods that can be used for hazard screening.

Materials for Clean H2 Production from Bioethanol Reforming

Hydrogen is one of the most important resources in providing food, fuel, and chemical products for our everyday life. Sustainable catalytic hydrogen production from bioethanol has gained significant attention in recent years due to globally diminishing fossil fuel supplies, which have necessitated the search for new chemical feedstocks.

Atomic Layer Deposition of Nanomaterials for Li-Ion Batteries, Fuel Cells, and Solar Cells

Nanomaterials are considered a route to the innovations required for large-scale implementation of renewable energy technologies in society to make our life sustainable.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico