WHA67235000
Whatman® in-line HEPA filtration units
Hepa-Vent 50mm Disc, inlet for 1/4 to 3/8 inch stepped barb, outlet for 1/4 to 3/8 inch stepped barb
Sinónimos:
Whatman filter, Whatman filters, Z744328, hepa filtration
Seleccione un Tamaño
MXP 3,590.00
Seleccione un Tamaño
About This Item
Saltar a
MXP 3,590.00
Materiales
glass fiber-reinforced polypropylene membrane
polypropylene housing
esterilidad
non-sterile
envase
pkg of 10 ea
fabricante / nombre comercial
Whatman 6723-5000
Whatman Article No. 28420221 (US reference)
Diámetro
50 mm
tamaño de poro
0.3 μm
Adaptador
inlet for 1/4 to 3/8 inch stepped barb
outlet for 1/4 to 3/8 inch stepped barb
¿Está buscando productos similares? Visita Guía de comparación de productos
Categorías relacionadas
1 of 4
Este artículo | WHA67027500 | WHA67029500 | WHA2709T |
|---|---|---|---|
| pore size 0.3 μm | pore size 0.3 μm | pore size 0.3 μm | pore size 0.3 μm |
| manufacturer/tradename Whatman 6723-5000, Whatman Article No. 28420221 (US reference) | manufacturer/tradename Whatman 6702-7500, Whatman Article No. 28420115 (US reference) | manufacturer/tradename Whatman 6702-9500, Whatman Article No. 28420116 (US reference) | manufacturer/tradename Whatman 2709T, Whatman Article No. 28418946 (US reference) |
| material glass fiber-reinforced polypropylene membrane, polypropylene housing | material glass fiber-reinforced polypropylene membrane, polypropylene housing | material glass fiber-reinforced polypropylene membrane, polypropylene housing | material glass fiber-reinforced polypropylene membrane, polypropylene housing |
| diam. 50 mm | diam. 75 mm | diam. 50 mm | diam. 75 mm |
| fitting inlet for 1/4 to 3/8 inch stepped barb, outlet for 1/4 to 3/8 inch stepped barb | fitting inlet for 3/8" FNPT to 1/2" stepped barb, outlet for 3/8" FNPT to 1/2" stepped barb | fitting inlet for 3/8 inch FNPT, outlet for 3/8 inch FNPT | fitting inlet for 3/8 inch FNPT, outlet for 3/8 inch FNP |
| sterility non-sterile | sterility non-sterile | sterility non-sterile | sterility non-sterile |
Descripción general
Whatman HEPA-VENT industrial air filter
HEPA air filter products offer particle retention of even heavily particulate-laden air samples. Whatman HEPA-VENT filters are highly suited for applications where high retention, dirt-holding capacity, and flow rates are required. They are typically used as in-line filters during air or gas filtration in fermenters, or incubators.
Características y beneficios
- Randomly arranged glass microfiber media is strengthened by dual lamination with a tough polyester monofilament for increased capacity
- Meets high-efficiency particulate arrestance standard, retaining 99.97% of all particles ≥ 0.3 µm in air
- Depth design results in extremely high retention and bidirectional flow rate
Otras notas
Información legal
Elija entre una de las versiones más recientes:
Certificados de análisis (COA)
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documentos section.
Si necesita más asistencia, póngase en contacto con Atención al cliente
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico